| Message ID | 1448063240-2739-1-git-send-email-tim.bird@sonymobile.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Andy Gross |
| Headers | show |
On Fri, Nov 20, 2015 at 03:47:18PM -0800, Tim Bird wrote: > Add optional async_irq to msm_hsusb binding doc. > > Signed-off-by: Tim Bird <tim.bird@sonymobile.com> Acked-by: Rob Herring <robh@kernel.org> > --- > Documentation/devicetree/bindings/usb/msm-hsusb.txt | 10 ++++++++-- > 1 file changed, 8 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt > index 8654a3e..2d13c1c 100644 > --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt > +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt > @@ -23,7 +23,12 @@ Required properties: > "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY > > - regs: Offset and length of the register set in the memory map > -- interrupts: interrupt-specifier for the OTG interrupt. > +- interrupts: interrupt-specifier for the OTG interrupts > + > +- interrupt-names: Should contain the following: > + "core" USB core interrupt > + "async" Asynchronous interrupt to wake up from low power mode > + (optional) > > - clocks: A list of phandle + clock-specifier pairs for the > clocks listed in clock-names > @@ -89,7 +94,8 @@ Example HSUSB OTG controller device node: > usb@f9a55000 { > compatible = "qcom,usb-otg-snps"; > reg = <0xf9a55000 0x400>; > - interrupts = <0 134 0>; > + interrupts = <0 134 0>, <0 140 0>; > + interrupt-names = "core", "async"; > dr_mode = "peripheral"; > > clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>, > -- > 1.8.2.2 > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index 8654a3e..2d13c1c 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -23,7 +23,12 @@ Required properties: "qcom,usb-otg-snps" for chipsets with Synopsys 28nm PHY - regs: Offset and length of the register set in the memory map -- interrupts: interrupt-specifier for the OTG interrupt. +- interrupts: interrupt-specifier for the OTG interrupts + +- interrupt-names: Should contain the following: + "core" USB core interrupt + "async" Asynchronous interrupt to wake up from low power mode + (optional) - clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names @@ -89,7 +94,8 @@ Example HSUSB OTG controller device node: usb@f9a55000 { compatible = "qcom,usb-otg-snps"; reg = <0xf9a55000 0x400>; - interrupts = <0 134 0>; + interrupts = <0 134 0>, <0 140 0>; + interrupt-names = "core", "async"; dr_mode = "peripheral"; clocks = <&gcc GCC_XO_CLK>, <&gcc GCC_USB_HS_SYSTEM_CLK>,
Add optional async_irq to msm_hsusb binding doc. Signed-off-by: Tim Bird <tim.bird@sonymobile.com> --- Documentation/devicetree/bindings/usb/msm-hsusb.txt | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)