| Message ID | 1458762465-9630-1-git-send-email-srinivas.kandagatla@linaro.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Wed 23 Mar 12:47 PDT 2016, Srinivas Kandagatla wrote: > This patch adds usb host and otg support on board with required > regulators. > Please fold the regulators into the regulator patch instead. For the rest: Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > --- > .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 64 ++++++++++++++++++++++ > 1 file changed, 64 insertions(+) > > diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts > index a977314..5374510 100644 > --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts > +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts > @@ -60,6 +60,12 @@ > bias-pull-down; > }; > > + s3 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1400000>; > + qcom,switch-mode-frequency = <4800000>; > + }; > + > s4 { > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > @@ -74,6 +80,18 @@ > qcom,switch-mode-frequency = <3200000>; > }; > > + l3 { > + regulator-min-microvolt = <3050000>; > + regulator-max-microvolt = <3300000>; > + bias-pull-down; > + }; > + > + l4 { > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1800000>; > + bias-pull-down; > + }; > + > l5 { > regulator-min-microvolt = <2750000>; > regulator-max-microvolt = <3000000>; > @@ -85,6 +103,12 @@ > regulator-max-microvolt = <2950000>; > bias-pull-down; > }; > + > + l23 { > + regulator-min-microvolt = <1700000>; > + regulator-max-microvolt = <1900000>; > + bias-pull-down; > + }; > }; > }; > > @@ -111,6 +135,46 @@ > }; > }; > > + /* OTG */ > + phy@12500000 { > + status = "okay"; > + dr_mode = "peripheral"; > + vddcx-supply = <&pm8921_s3>; > + v3p3-supply = <&pm8921_l3>; > + v1p8-supply = <&pm8921_l4>; > + }; > + > + phy@12520000 { > + status = "okay"; > + vddcx-supply = <&pm8921_s3>; > + v3p3-supply = <&pm8921_l3>; > + v1p8-supply = <&pm8921_l23>; > + }; > + > + phy@12530000 { > + status = "okay"; > + vddcx-supply = <&pm8921_s3>; > + v3p3-supply = <&pm8921_l3>; > + v1p8-supply = <&pm8921_l23>; > + }; > + > + gadget@12500000 { > + status = "okay"; > + }; > + > + /* OTG */ > + usb@12500000 { > + status = "okay"; > + }; > + > + usb@12520000 { > + status = "okay"; > + }; > + > + usb@12530000 { > + status = "okay"; > + }; > + > amba { > /* eMMC */ > sdcc@12400000 { > -- > 2.5.0 > > -- > To unsubscribe from this list: send the line "unsubscribe devicetree" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts index a977314..5374510 100644 --- a/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts +++ b/arch/arm/boot/dts/qcom-apq8064-dragonboard-600c.dts @@ -60,6 +60,12 @@ bias-pull-down; }; + s3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + qcom,switch-mode-frequency = <4800000>; + }; + s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -74,6 +80,18 @@ qcom,switch-mode-frequency = <3200000>; }; + l3 { + regulator-min-microvolt = <3050000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + l4 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; @@ -85,6 +103,12 @@ regulator-max-microvolt = <2950000>; bias-pull-down; }; + + l23 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; }; }; @@ -111,6 +135,46 @@ }; }; + /* OTG */ + phy@12500000 { + status = "okay"; + dr_mode = "peripheral"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; + }; + + phy@12520000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + phy@12530000 { + status = "okay"; + vddcx-supply = <&pm8921_s3>; + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l23>; + }; + + gadget@12500000 { + status = "okay"; + }; + + /* OTG */ + usb@12500000 { + status = "okay"; + }; + + usb@12520000 { + status = "okay"; + }; + + usb@12530000 { + status = "okay"; + }; + amba { /* eMMC */ sdcc@12400000 {
This patch adds usb host and otg support on board with required regulators. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- .../arm/boot/dts/qcom-apq8064-dragonboard-600c.dts | 64 ++++++++++++++++++++++ 1 file changed, 64 insertions(+)