diff mbox

[13/17] qcom: ipq4019: add i2c node to ipq4019 SoC and DK01 device tree

Message ID 1458770712-10880-14-git-send-email-mmcclint@codeaurora.org (mailing list archive)
State Accepted, archived
Delegated to: Andy Gross
Headers show

Commit Message

Matthew McClintock March 23, 2016, 10:05 p.m. UTC 
This will allow boards to enable the I2C bus

CC: Sricharan R <srichara@qti.qualcomm.com>
Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq4019.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 99e64f4..1937edf 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -25,6 +25,7 @@ 
 
 	aliases {
 		spi0 = &spi_0;
+		i2c0 = &i2c_0;
 	};
 
 	cpus {
@@ -126,6 +127,18 @@ 
 			status = "disabled";
 		};
 
+		i2c_0: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x78b7000 0x6000>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+				 <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>;
+			clock-names = "iface", "core";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
                 acc0: clock-controller@b088000 {
                         compatible = "qcom,kpss-acc-v1";
                         reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;