diff mbox

[v2,5/5] dmaengine: qcom: bam_dma: rename BAM_MAX_DATA_SIZE define

Message ID 1459896982-30171-6-git-send-email-stanimir.varbanov@linaro.org (mailing list archive)
State Not Applicable, archived
Delegated to: Andy Gross
Headers show

Commit Message

Stanimir Varbanov April 5, 2016, 10:56 p.m. UTC 
It seems that the define has not been with acurate name and
makes confusion while reading the code. The more acurate
name should be BAM_FIFO_SIZE.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
---
 drivers/dma/qcom/bam_dma.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Comments

Vinod Koul April 5, 2016, 11:47 p.m. UTC | #1 
On Wed, Apr 06, 2016 at 01:56:22AM +0300, Stanimir Varbanov wrote:
> It seems that the define has not been with acurate name and
> makes confusion while reading the code. The more acurate
> name should be BAM_FIFO_SIZE.

And not sure by that, what do you mean by FIFO size. In dmaengine context we
typically refer to FIFO as periphral FIFO size. But the changes belo imple
that you are uisng this for block..?

> 
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
> ---
>  drivers/dma/qcom/bam_dma.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
> index 7e5ad1c25e21..969b48176745 100644
> --- a/drivers/dma/qcom/bam_dma.c
> +++ b/drivers/dma/qcom/bam_dma.c
> @@ -342,7 +342,7 @@ static const struct reg_offset_data bam_v1_7_reg_info[] = {
>  
>  #define BAM_DESC_FIFO_SIZE	SZ_32K
>  #define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1)
> -#define BAM_MAX_DATA_SIZE	(SZ_32K - 8)
> +#define BAM_FIFO_SIZE	(SZ_32K - 8)
>  
>  struct bam_chan {
>  	struct virt_dma_chan vc;
> @@ -459,7 +459,7 @@ static void bam_chan_init_hw(struct bam_chan *bchan,
>  	 */
>  	writel_relaxed(ALIGN(bchan->fifo_phys, sizeof(struct bam_desc_hw)),
>  			bam_addr(bdev, bchan->id, BAM_P_DESC_FIFO_ADDR));
> -	writel_relaxed(BAM_MAX_DATA_SIZE,
> +	writel_relaxed(BAM_FIFO_SIZE,
>  			bam_addr(bdev, bchan->id, BAM_P_FIFO_SIZES));
>  
>  	/* enable the per pipe interrupts, enable EOT, ERR, and INT irqs */
> @@ -605,7 +605,7 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
>  
>  	/* calculate number of required entries */
>  	for_each_sg(sgl, sg, sg_len, i)
> -		num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_MAX_DATA_SIZE);
> +		num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_FIFO_SIZE);
>  
>  	/* allocate enough room to accomodate the number of entries */
>  	async_desc = kzalloc(sizeof(*async_desc) +
> @@ -636,10 +636,10 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
>  			desc->addr = cpu_to_le32(sg_dma_address(sg) +
>  						 curr_offset);
>  
> -			if (remainder > BAM_MAX_DATA_SIZE) {
> -				desc->size = cpu_to_le16(BAM_MAX_DATA_SIZE);
> -				remainder -= BAM_MAX_DATA_SIZE;
> -				curr_offset += BAM_MAX_DATA_SIZE;
> +			if (remainder > BAM_FIFO_SIZE) {
> +				desc->size = cpu_to_le16(BAM_FIFO_SIZE);
> +				remainder -= BAM_FIFO_SIZE;
> +				curr_offset += BAM_FIFO_SIZE;
>  			} else {
>  				desc->size = cpu_to_le16(remainder);
>  				remainder = 0;
> @@ -1174,7 +1174,7 @@ static int bam_dma_probe(struct platform_device *pdev)
>  	/* set max dma segment size */
>  	bdev->common.dev = bdev->dev;
>  	bdev->common.dev->dma_parms = &bdev->dma_parms;
> -	ret = dma_set_max_seg_size(bdev->common.dev, BAM_MAX_DATA_SIZE);
> +	ret = dma_set_max_seg_size(bdev->common.dev, BAM_FIFO_SIZE);
>  	if (ret) {
>  		dev_err(bdev->dev, "cannot set maximum segment size\n");
>  		goto err_bam_channel_exit;
> -- 
> 1.9.1
>
Stanimir Varbanov April 6, 2016, 3:30 p.m. UTC | #2 
On 04/06/2016 02:47 AM, Vinod Koul wrote:
> On Wed, Apr 06, 2016 at 01:56:22AM +0300, Stanimir Varbanov wrote:
>> It seems that the define has not been with acurate name and
>> makes confusion while reading the code. The more acurate
>> name should be BAM_FIFO_SIZE.
> 
> And not sure by that, what do you mean by FIFO size. In dmaengine context we

By BAM_FIFO_SIZE I meant a FIFO depth for hw descriptors, i.e. how many
hw descriptors could be pushed into the descriptor FIFO. In our case we
wrote BAM_P_FIFO_SIZES register with SZ_32K - 8, which means that the
FIFO will be 4095 hw descriptors deep.

In fact the important patch in this series 4/5 where I corrected the
value we wrote in BAM_P_FIFO_SIZES register.

4/5 and 5/5 can be postponed till we have better decision...
diff mbox

Patch

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index 7e5ad1c25e21..969b48176745 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -342,7 +342,7 @@  static const struct reg_offset_data bam_v1_7_reg_info[] = {
 
 #define BAM_DESC_FIFO_SIZE	SZ_32K
 #define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1)
-#define BAM_MAX_DATA_SIZE	(SZ_32K - 8)
+#define BAM_FIFO_SIZE	(SZ_32K - 8)
 
 struct bam_chan {
 	struct virt_dma_chan vc;
@@ -459,7 +459,7 @@  static void bam_chan_init_hw(struct bam_chan *bchan,
 	 */
 	writel_relaxed(ALIGN(bchan->fifo_phys, sizeof(struct bam_desc_hw)),
 			bam_addr(bdev, bchan->id, BAM_P_DESC_FIFO_ADDR));
-	writel_relaxed(BAM_MAX_DATA_SIZE,
+	writel_relaxed(BAM_FIFO_SIZE,
 			bam_addr(bdev, bchan->id, BAM_P_FIFO_SIZES));
 
 	/* enable the per pipe interrupts, enable EOT, ERR, and INT irqs */
@@ -605,7 +605,7 @@  static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
 
 	/* calculate number of required entries */
 	for_each_sg(sgl, sg, sg_len, i)
-		num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_MAX_DATA_SIZE);
+		num_alloc += DIV_ROUND_UP(sg_dma_len(sg), BAM_FIFO_SIZE);
 
 	/* allocate enough room to accomodate the number of entries */
 	async_desc = kzalloc(sizeof(*async_desc) +
@@ -636,10 +636,10 @@  static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
 			desc->addr = cpu_to_le32(sg_dma_address(sg) +
 						 curr_offset);
 
-			if (remainder > BAM_MAX_DATA_SIZE) {
-				desc->size = cpu_to_le16(BAM_MAX_DATA_SIZE);
-				remainder -= BAM_MAX_DATA_SIZE;
-				curr_offset += BAM_MAX_DATA_SIZE;
+			if (remainder > BAM_FIFO_SIZE) {
+				desc->size = cpu_to_le16(BAM_FIFO_SIZE);
+				remainder -= BAM_FIFO_SIZE;
+				curr_offset += BAM_FIFO_SIZE;
 			} else {
 				desc->size = cpu_to_le16(remainder);
 				remainder = 0;
@@ -1174,7 +1174,7 @@  static int bam_dma_probe(struct platform_device *pdev)
 	/* set max dma segment size */
 	bdev->common.dev = bdev->dev;
 	bdev->common.dev->dma_parms = &bdev->dma_parms;
-	ret = dma_set_max_seg_size(bdev->common.dev, BAM_MAX_DATA_SIZE);
+	ret = dma_set_max_seg_size(bdev->common.dev, BAM_FIFO_SIZE);
 	if (ret) {
 		dev_err(bdev->dev, "cannot set maximum segment size\n");
 		goto err_bam_channel_exit;