diff mbox

[RESEND,3/5] arm: qcom: dts: ipq8064: Add ADM device node

Message ID 1467150186-11427-4-git-send-email-twp@codeaurora.org (mailing list archive)
State Deferred, archived
Delegated to: Andy Gross
Headers show

Commit Message

Thomas Pedersen June 28, 2016, 9:43 p.m. UTC 
From: Andy Gross <andy.gross@linaro.org>

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 2601a90..1a3549f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -1,9 +1,11 @@ 
 /dts-v1/;
 
 #include "skeleton.dtsi"
+#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
 #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
 #include <dt-bindings/clock/qcom,lcc-ipq806x.h>
 #include <dt-bindings/soc/qcom,gsbi.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	model = "Qualcomm IPQ8064";
@@ -341,5 +343,24 @@ 
 			#reset-cells = <1>;
 		};
 
+		adm_dma: dma@18300000 {
+			compatible = "qcom,adm";
+			reg = <0x18300000 0x100000>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
+			#dma-cells = <1>;
+
+			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+			clock-names = "core", "iface";
+
+			resets = <&gcc ADM0_RESET>,
+				 <&gcc ADM0_PBUS_RESET>,
+				 <&gcc ADM0_C0_RESET>,
+				 <&gcc ADM0_C1_RESET>,
+				 <&gcc ADM0_C2_RESET>;
+			reset-names = "clk", "pbus", "c0", "c1", "c2";
+			qcom,ee = <0>;
+
+			status = "disabled";
+		};
 	};
 };