| Message ID | 1471454854-28302-2-git-send-email-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | Accepted, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On Wed 17 Aug 10:27 PDT 2016, Bjorn Andersson wrote: > This document defines the binding for a component that loads firmware > and control the life cycle of the Qualcomm ADSP core. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > .../devicetree/bindings/remoteproc/qcom,adsp.txt | 69 ++++++++++++++++++++++ > 1 file changed, 69 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt > > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt > new file mode 100644 > index 000000000000..077d9b6b9cd0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt > @@ -0,0 +1,69 @@ > +Qualcomm ADSP Peripheral Image Loader > + > +This document defines the binding for a component that loads and boots firmware > +on the Qualcomm ADSP core. > + > +- compatible: > + Usage: required > + Value type: <string> > + Definition: must be one of: > + "qcom,adsp-pil" This won't fly, as I moved past 8974 and 8996 to 8064 I found a few new details that makes this slightly off, and the 8660 ADSP resources are way off. So it's probably better to throw in a platform identifier in the compatible. Regards, Bjorn > + > +- interrupts-extended: > + Usage: required > + Value type: <prop-encoded-array> > + Definition: must list the watchdog, fatal IRQs ready, handover and > + stop-ack IRQs > + > +- interrupt-names: > + Usage: required > + Value type: <stringlist> > + Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" > + > +- cx-supply: > + Usage: required > + Value type: <phandle> > + Definition: reference to the regulator to be held on behalf of the > + booting of the Hexagon core > + > +- memory-region: > + Usage: required > + Value type: <phandle> > + Definition: reference to the reserved-memory for the ADSP > + > +- qcom,smem-states: > + Usage: required > + Value type: <phandle> > + Definition: reference to the smem state for requesting the ADSP to > + shut down > + > +- qcom,smem-state-names: > + Usage: required > + Value type: <stringlist> > + Definition: must be "stop" > + > += EXAMPLE > +The following example describes the resources needed to boot control the > +ADSP, as it is found on MSM8974 boards. > + > + adsp { > + compatible = "qcom,adsp-pil"; > + > + interrupts-extended = <&intc 0 162 1>, > + <&adsp_smp2p_in 0 0>, > + <&adsp_smp2p_in 1 0>, > + <&adsp_smp2p_in 2 0>, > + <&adsp_smp2p_in 3 0>; > + interrupt-names = "wdog", > + "fatal", > + "ready", > + "handover", > + "stop-ack"; > + > + cx-supply = <&pm8841_s2>; > + > + memory-region = <&adsp_region>; > + > + qcom,smem-states = <&adsp_smp2p_out 0>; > + qcom,smem-state-names = "stop"; > + }; > -- > 2.5.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt new file mode 100644 index 000000000000..077d9b6b9cd0 --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt @@ -0,0 +1,69 @@ +Qualcomm ADSP Peripheral Image Loader + +This document defines the binding for a component that loads and boots firmware +on the Qualcomm ADSP core. + +- compatible: + Usage: required + Value type: <string> + Definition: must be one of: + "qcom,adsp-pil" + +- interrupts-extended: + Usage: required + Value type: <prop-encoded-array> + Definition: must list the watchdog, fatal IRQs ready, handover and + stop-ack IRQs + +- interrupt-names: + Usage: required + Value type: <stringlist> + Definition: must be "wdog", "fatal", "ready", "handover", "stop-ack" + +- cx-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulator to be held on behalf of the + booting of the Hexagon core + +- memory-region: + Usage: required + Value type: <phandle> + Definition: reference to the reserved-memory for the ADSP + +- qcom,smem-states: + Usage: required + Value type: <phandle> + Definition: reference to the smem state for requesting the ADSP to + shut down + +- qcom,smem-state-names: + Usage: required + Value type: <stringlist> + Definition: must be "stop" + += EXAMPLE +The following example describes the resources needed to boot control the +ADSP, as it is found on MSM8974 boards. + + adsp { + compatible = "qcom,adsp-pil"; + + interrupts-extended = <&intc 0 162 1>, + <&adsp_smp2p_in 0 0>, + <&adsp_smp2p_in 1 0>, + <&adsp_smp2p_in 2 0>, + <&adsp_smp2p_in 3 0>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + cx-supply = <&pm8841_s2>; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + };
This document defines the binding for a component that loads firmware and control the life cycle of the Qualcomm ADSP core. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- .../devicetree/bindings/remoteproc/qcom,adsp.txt | 69 ++++++++++++++++++++++ 1 file changed, 69 insertions(+) create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt