diff mbox

[RFC,V2,09/12] arm64: dts: move Huawei Angler (Nexus 6P) to qcom directory

Message ID 1475375919-618-10-git-send-email-jmcnicol@redhat.com (mailing list archive)
State Not Applicable, archived
Delegated to: Andy Gross
Headers show

Commit Message

Jeremy McNicoll Oct. 2, 2016, 2:38 a.m. UTC
Given that this is a MSM SoC and not a specific vendor created
SoC moving associated device tree files to qcom directory.

Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
---
 arch/arm64/boot/dts/huawei/Makefile                             | 5 -----
 arch/arm64/boot/dts/qcom/Makefile                               | 4 ++--
 arch/arm64/boot/dts/{huawei => qcom}/msm8994-angler-rev-101.dts | 2 +-
 3 files changed, 3 insertions(+), 8 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/huawei/Makefile
 rename arch/arm64/boot/dts/{huawei => qcom}/msm8994-angler-rev-101.dts (96%)

Comments

Rob Herring (Arm) Oct. 9, 2016, 1:28 a.m. UTC | #1
On Sat, Oct 01, 2016 at 07:38:36PM -0700, Jeremy McNicoll wrote:
> Given that this is a MSM SoC and not a specific vendor created
> SoC moving associated device tree files to qcom directory.
> 
> Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
> ---
>  arch/arm64/boot/dts/huawei/Makefile                             | 5 -----
>  arch/arm64/boot/dts/qcom/Makefile                               | 4 ++--
>  arch/arm64/boot/dts/{huawei => qcom}/msm8994-angler-rev-101.dts | 2 +-

What tree are you based on? There's no huawei dir in mainline. You need 
to rebase everything.

>  3 files changed, 3 insertions(+), 8 deletions(-)
>  delete mode 100644 arch/arm64/boot/dts/huawei/Makefile
>  rename arch/arm64/boot/dts/{huawei => qcom}/msm8994-angler-rev-101.dts (96%)
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jeremy McNicoll Oct. 10, 2016, 10:21 p.m. UTC | #2
On 2016-10-08 6:28 PM, Rob Herring wrote:
> On Sat, Oct 01, 2016 at 07:38:36PM -0700, Jeremy McNicoll wrote:
>> Given that this is a MSM SoC and not a specific vendor created
>> SoC moving associated device tree files to qcom directory.
>>
>> Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
>> ---
>>  arch/arm64/boot/dts/huawei/Makefile                             | 5 -----
>>  arch/arm64/boot/dts/qcom/Makefile                               | 4 ++--
>>  arch/arm64/boot/dts/{huawei => qcom}/msm8994-angler-rev-101.dts | 2 +-
>
> What tree are you based on? There's no huawei dir in mainline. You need
> to rebase everything.

One change was made to 8/12 and explicitly documented, unfortunately the
list was getting long.   A way to deal with this situation was discussed 
on IRC with a few people regarding the best way to deal with this, and 
this is how they instructed me to deal with this type of scenario.

-jeremy




>
>>  3 files changed, 3 insertions(+), 8 deletions(-)
>>  delete mode 100644 arch/arm64/boot/dts/huawei/Makefile
>>  rename arch/arm64/boot/dts/{huawei => qcom}/msm8994-angler-rev-101.dts (96%)

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Rob Herring (Arm) Oct. 12, 2016, 12:32 a.m. UTC | #3
On Mon, Oct 10, 2016 at 5:21 PM, Jeremy McNicoll <jmcnicol@redhat.com> wrote:
> On 2016-10-08 6:28 PM, Rob Herring wrote:
>>
>> On Sat, Oct 01, 2016 at 07:38:36PM -0700, Jeremy McNicoll wrote:
>>>
>>> Given that this is a MSM SoC and not a specific vendor created
>>> SoC moving associated device tree files to qcom directory.
>>>
>>> Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
>>> ---
>>>  arch/arm64/boot/dts/huawei/Makefile                             | 5
>>> -----
>>>  arch/arm64/boot/dts/qcom/Makefile                               | 4 ++--
>>>  arch/arm64/boot/dts/{huawei => qcom}/msm8994-angler-rev-101.dts | 2 +-
>>
>>
>> What tree are you based on? There's no huawei dir in mainline. You need
>> to rebase everything.
>
>
> One change was made to 8/12 and explicitly documented, unfortunately the
> list was getting long.   A way to deal with this situation was discussed on
> IRC with a few people regarding the best way to deal with this, and this is
> how they instructed me to deal with this type of scenario.

You are not changing anything important here. Squash this, maintain
the original author, and just note that you moved the location before
your signoff. No one wants to see the original out of tree code.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/huawei/Makefile b/arch/arm64/boot/dts/huawei/Makefile
deleted file mode 100644
index 4b31ff4..0000000
--- a/arch/arm64/boot/dts/huawei/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@ 
-dtb-$(CONFIG_MACH_HUAWEI) += msm8994-angler-rev-101.dtb
-
-always          := $(dtb-y)
-subdir-y        := $(dts-dirs)
-clean-files     := *.dtb
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index cee6bcc..84f102d 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,5 +1,5 @@ 
-dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb msm8992-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb msm8916-mtp.dtb msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb msm8994-angler-rev-101.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)
diff --git a/arch/arm64/boot/dts/huawei/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
similarity index 96%
rename from arch/arm64/boot/dts/huawei/msm8994-angler-rev-101.dts
rename to arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
index 07a71d6..5cff29f 100644
--- a/arch/arm64/boot/dts/huawei/msm8994-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -13,7 +13,7 @@ 
 
 /dts-v1/;
 
-#include "../qcom/msm8994-v2.0.dtsi"
+#include "msm8994-v2.0.dtsi"
 
 / {
 	model = "HUAWEI MSM8994 ANGLER rev-1.01";