| Message ID | 1475600632-21289-6-git-send-email-sricharan@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Delegated to: | Andy Gross |
| Headers | show |
On 04/10/16 18:03, Sricharan R wrote: > From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> > > Failures to look up an IOMMU when parsing the DT iommus property need to > be handled separately from the .of_xlate() failures to support deferred > probing. > > The lack of a registered IOMMU can be caused by the lack of a driver for > the IOMMU, the IOMMU device probe not having been performed yet, having > been deferred, or having failed. > > The first case occurs when the device tree describes the bus master and > IOMMU topology correctly but no device driver exists for the IOMMU yet > or the device driver has not been compiled in. Return NULL, the caller > will configure the device without an IOMMU. > > The second and third cases are handled by deferring the probe of the bus > master device which will eventually get reprobed after the IOMMU. > > The last case is currently handled by deferring the probe of the bus > master device as well. A mechanism to either configure the bus master > device without an IOMMU or to fail the bus master device probe depending > on whether the IOMMU is optional or mandatory would be a good > enhancement. > > The current iommu framework handles pci and non-pci devices separately, > so taken care of both the paths in this patch. The iommu's add_device > callback is invoked after the master's configuration data is added in > xlate. This is needed because the iommu core calls add_device callback > during the BUS_ADD_DEVICE notifier, which is of no use now. Eventually > that call has to be removed. Laurent's signoff seems to have gone missing here. > Signed-off-by: Sricharan R <sricharan@codeaurora.org> > --- > drivers/iommu/of_iommu.c | 47 +++++++++++++++++++++++++++++++++++++++++++---- > drivers/of/device.c | 7 ++++++- > include/linux/of_device.h | 6 ++++-- > 3 files changed, 53 insertions(+), 7 deletions(-) > > diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c > index 5b82862..1a5e28b 100644 > --- a/drivers/iommu/of_iommu.c > +++ b/drivers/iommu/of_iommu.c > @@ -23,6 +23,7 @@ > #include <linux/of.h> > #include <linux/of_iommu.h> > #include <linux/of_pci.h> > +#include <linux/pci.h> > #include <linux/slab.h> > > static const struct of_device_id __iommu_of_table_sentinel > @@ -167,12 +168,29 @@ static const struct iommu_ops > return NULL; > > ops = of_iommu_get_ops(iommu_spec.np); > + > + if (!ops) { > + const struct of_device_id *oid; > + > + oid = of_match_node(&__iommu_of_table, iommu_spec.np); > + ops = oid ? ERR_PTR(-EPROBE_DEFER) : NULL; It would seem even simpler and more convenient to roll this into the end of of_iommu_get_ops(): if (!ops && of_match_node(&__iommu_of_table, iommu_spec.np)) ops = ERR_PTR(-EPROBE_DEFER); then just fix up the existing !ops checks to !IS_ERR(ops) appropriately. > + return ops; > + } > + > if (!ops || !ops->of_xlate || > iommu_fwspec_init(&pdev->dev, &iommu_spec.np->fwnode, ops) || > ops->of_xlate(&pdev->dev, &iommu_spec)) > ops = NULL; > > + if (ops && ops->add_device) { > + ops = (ops->add_device(&pdev->dev) == 0) ? ops : NULL; This is a really obtuse way of writing if (ops->add_device(...)) ops = NULL; However, given that we're now returning an ERR_PTR, it would be worth capturing the return value of add_device and propagating the error back up - if the IOMMU driver has refused one of its masters for some reason, it probably isn't safe to allow that device to do DMA either way, so we ought to prevent it probing at all. > + > + if (!ops) > + dev_err(&pdev->dev, "Failed to setup iommu ops\n"); Given the above, I think this should be more along the lines of "Device rejected by IOMMU: %d" with the actual error code as well. It's one of those "if you ever see it, you're going to have to debug it" cases, so the clearer the better. > + } > + > of_node_put(iommu_spec.np); > + > return ops; > } > > @@ -183,9 +201,15 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, > struct device_node *np; > const struct iommu_ops *ops = NULL; > int idx = 0; > + struct device *bridge; > + > + if (dev_is_pci(dev)) { > + bridge = pci_get_host_bridge_device(to_pci_dev(dev)); > > - if (dev_is_pci(dev)) > - return of_pci_iommu_configure(to_pci_dev(dev), master_np); > + if (bridge && bridge->parent && bridge->parent->of_node) > + return of_pci_iommu_configure(to_pci_dev(dev), > + bridge->parent->of_node); else fall through to treating it as a platform device? ...that's not right. Anyway, this is PCI-specific stuff so should be in the PCI-specific helper function. > + } > > /* > * We don't currently walk up the tree looking for a parent IOMMU. > @@ -198,6 +222,14 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, > np = iommu_spec.np; > ops = of_iommu_get_ops(np); > > + if (!ops) { > + const struct of_device_id *oid; > + > + oid = of_match_node(&__iommu_of_table, np); > + ops = oid ? ERR_PTR(-EPROBE_DEFER) : NULL; > + goto err_put_node; > + } Same comment as above. Especially since moving it to of_iommu_get_ops() would obviate the duplication. > + > if (!ops || !ops->of_xlate || > iommu_fwspec_init(dev, &np->fwnode, ops) || > ops->of_xlate(dev, &iommu_spec)) > @@ -207,11 +239,18 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, > idx++; > } > > + if (ops && ops->add_device) { > + ops = (ops->add_device(dev) == 0) ? ops : NULL; > + > + if (!ops) > + dev_err(dev, "Failed to setup iommu_ops\n"); > + } > + It would be nice to avoid duplicating this as well. Robin. > return ops; > > err_put_node: > of_node_put(np); > - return NULL; > + return ops; > } > > static int __init of_iommu_init(void) > @@ -222,7 +261,7 @@ static int __init of_iommu_init(void) > for_each_matching_node_and_match(np, matches, &match) { > const of_iommu_init_fn init_fn = match->data; > > - if (init_fn(np)) > + if (init_fn && init_fn(np)) > pr_err("Failed to initialise IOMMU %s\n", > of_node_full_name(np)); > } > diff --git a/drivers/of/device.c b/drivers/of/device.c > index 1c843e2..c8e74d7 100644 > --- a/drivers/of/device.c > +++ b/drivers/of/device.c > @@ -82,7 +82,7 @@ int of_device_add(struct platform_device *ofdev) > * can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events > * to fix up DMA configuration. > */ > -void of_dma_configure(struct device *dev, struct device_node *np) > +int of_dma_configure(struct device *dev, struct device_node *np) > { > u64 dma_addr, paddr, size; > int ret; > @@ -129,10 +129,15 @@ void of_dma_configure(struct device *dev, struct device_node *np) > coherent ? " " : " not "); > > iommu = of_iommu_configure(dev, np); > + if (IS_ERR(iommu)) > + return PTR_ERR(iommu); > + > dev_dbg(dev, "device is%sbehind an iommu\n", > iommu ? " " : " not "); > > arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent); > + > + return 0; > } > EXPORT_SYMBOL_GPL(of_dma_configure); > > diff --git a/include/linux/of_device.h b/include/linux/of_device.h > index d20a31a..2bdb872 100644 > --- a/include/linux/of_device.h > +++ b/include/linux/of_device.h > @@ -55,7 +55,7 @@ static inline struct device_node *of_cpu_device_node_get(int cpu) > return of_node_get(cpu_dev->of_node); > } > > -void of_dma_configure(struct device *dev, struct device_node *np); > +int of_dma_configure(struct device *dev, struct device_node *np); > void of_dma_deconfigure(struct device *dev); > #else /* CONFIG_OF */ > > @@ -100,7 +100,9 @@ static inline struct device_node *of_cpu_device_node_get(int cpu) > return NULL; > } > static inline void of_dma_configure(struct device *dev, struct device_node *np) > -{} > +{ > + return 0; > +} > static inline void of_dma_deconfigure(struct device *dev) > {} > #endif /* CONFIG_OF */ > -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Robin, >> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> >> >> Failures to look up an IOMMU when parsing the DT iommus property need to >> be handled separately from the .of_xlate() failures to support deferred >> probing. >> >> The lack of a registered IOMMU can be caused by the lack of a driver for >> the IOMMU, the IOMMU device probe not having been performed yet, having >> been deferred, or having failed. >> >> The first case occurs when the device tree describes the bus master and >> IOMMU topology correctly but no device driver exists for the IOMMU yet >> or the device driver has not been compiled in. Return NULL, the caller >> will configure the device without an IOMMU. >> >> The second and third cases are handled by deferring the probe of the bus >> master device which will eventually get reprobed after the IOMMU. >> >> The last case is currently handled by deferring the probe of the bus >> master device as well. A mechanism to either configure the bus master >> device without an IOMMU or to fail the bus master device probe depending >> on whether the IOMMU is optional or mandatory would be a good >> enhancement. >> >> The current iommu framework handles pci and non-pci devices separately, >> so taken care of both the paths in this patch. The iommu's add_device >> callback is invoked after the master's configuration data is added in >> xlate. This is needed because the iommu core calls add_device callback >> during the BUS_ADD_DEVICE notifier, which is of no use now. Eventually >> that call has to be removed. > >Laurent's signoff seems to have gone missing here. Ah, preserved his authorship, but missed this. Will add it back. > >> Signed-off-by: Sricharan R <sricharan@codeaurora.org> >> --- >> drivers/iommu/of_iommu.c | 47 +++++++++++++++++++++++++++++++++++++++++++---- >> drivers/of/device.c | 7 ++++++- >> include/linux/of_device.h | 6 ++++-- >> 3 files changed, 53 insertions(+), 7 deletions(-) >> >> diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c >> index 5b82862..1a5e28b 100644 >> --- a/drivers/iommu/of_iommu.c >> +++ b/drivers/iommu/of_iommu.c >> @@ -23,6 +23,7 @@ >> #include <linux/of.h> >> #include <linux/of_iommu.h> >> #include <linux/of_pci.h> >> +#include <linux/pci.h> >> #include <linux/slab.h> >> >> static const struct of_device_id __iommu_of_table_sentinel >> @@ -167,12 +168,29 @@ static const struct iommu_ops >> return NULL; >> >> ops = of_iommu_get_ops(iommu_spec.np); >> + >> + if (!ops) { >> + const struct of_device_id *oid; >> + >> + oid = of_match_node(&__iommu_of_table, iommu_spec.np); >> + ops = oid ? ERR_PTR(-EPROBE_DEFER) : NULL; > >It would seem even simpler and more convenient to roll this into the end >of of_iommu_get_ops(): ok, understand. Will move this there. > > if (!ops && of_match_node(&__iommu_of_table, iommu_spec.np)) > ops = ERR_PTR(-EPROBE_DEFER); > >then just fix up the existing !ops checks to !IS_ERR(ops) appropriately. ok. > >> + return ops; >> + } >> + >> if (!ops || !ops->of_xlate || >> iommu_fwspec_init(&pdev->dev, &iommu_spec.np->fwnode, ops) || >> ops->of_xlate(&pdev->dev, &iommu_spec)) >> ops = NULL; >> >> + if (ops && ops->add_device) { >> + ops = (ops->add_device(&pdev->dev) == 0) ? ops : NULL; > >This is a really obtuse way of writing > > if (ops->add_device(...)) > ops = NULL; ok, will change it this way. > >However, given that we're now returning an ERR_PTR, it would be worth >capturing the return value of add_device and propagating the error back >up - if the IOMMU driver has refused one of its masters for some reason, >it probably isn't safe to allow that device to do DMA either way, so we >ought to prevent it probing at all. > ok, will return the err value instead of NULL here. >> + >> + if (!ops) >> + dev_err(&pdev->dev, "Failed to setup iommu ops\n"); > >Given the above, I think this should be more along the lines of "Device >rejected by IOMMU: %d" with the actual error code as well. It's one of >those "if you ever see it, you're going to have to debug it" cases, so >the clearer the better. > ok, will reword the print. >> + } >> + >> of_node_put(iommu_spec.np); >> + >> return ops; >> } >> >> @@ -183,9 +201,15 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, >> struct device_node *np; >> const struct iommu_ops *ops = NULL; >> int idx = 0; >> + struct device *bridge; >> + >> + if (dev_is_pci(dev)) { >> + bridge = pci_get_host_bridge_device(to_pci_dev(dev)); >> >> - if (dev_is_pci(dev)) >> - return of_pci_iommu_configure(to_pci_dev(dev), master_np); >> + if (bridge && bridge->parent && bridge->parent->of_node) >> + return of_pci_iommu_configure(to_pci_dev(dev), >> + bridge->parent->of_node); > > else fall through to treating it as a platform device? > ha, surely wrong. Will correct this and move it to the of_pci_iommu_configure helper. >...that's not right. Anyway, this is PCI-specific stuff so should be in >the PCI-specific helper function. > >> + } >> >> /* >> * We don't currently walk up the tree looking for a parent IOMMU. >> @@ -198,6 +222,14 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, >> np = iommu_spec.np; >> ops = of_iommu_get_ops(np); >> >> + if (!ops) { >> + const struct of_device_id *oid; >> + >> + oid = of_match_node(&__iommu_of_table, np); >> + ops = oid ? ERR_PTR(-EPROBE_DEFER) : NULL; >> + goto err_put_node; >> + } > >Same comment as above. Especially since moving it to of_iommu_get_ops() >would obviate the duplication. ok. > >> + >> if (!ops || !ops->of_xlate || >> iommu_fwspec_init(dev, &np->fwnode, ops) || >> ops->of_xlate(dev, &iommu_spec)) >> @@ -207,11 +239,18 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, >> idx++; >> } >> >> + if (ops && ops->add_device) { >> + ops = (ops->add_device(dev) == 0) ? ops : NULL; >> + >> + if (!ops) >> + dev_err(dev, "Failed to setup iommu_ops\n"); >> + } >> + > >It would be nice to avoid duplicating this as well. ok, sure, will correct. Regards, Sricharan -- To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/iommu/of_iommu.c b/drivers/iommu/of_iommu.c index 5b82862..1a5e28b 100644 --- a/drivers/iommu/of_iommu.c +++ b/drivers/iommu/of_iommu.c @@ -23,6 +23,7 @@ #include <linux/of.h> #include <linux/of_iommu.h> #include <linux/of_pci.h> +#include <linux/pci.h> #include <linux/slab.h> static const struct of_device_id __iommu_of_table_sentinel @@ -167,12 +168,29 @@ static const struct iommu_ops return NULL; ops = of_iommu_get_ops(iommu_spec.np); + + if (!ops) { + const struct of_device_id *oid; + + oid = of_match_node(&__iommu_of_table, iommu_spec.np); + ops = oid ? ERR_PTR(-EPROBE_DEFER) : NULL; + return ops; + } + if (!ops || !ops->of_xlate || iommu_fwspec_init(&pdev->dev, &iommu_spec.np->fwnode, ops) || ops->of_xlate(&pdev->dev, &iommu_spec)) ops = NULL; + if (ops && ops->add_device) { + ops = (ops->add_device(&pdev->dev) == 0) ? ops : NULL; + + if (!ops) + dev_err(&pdev->dev, "Failed to setup iommu ops\n"); + } + of_node_put(iommu_spec.np); + return ops; } @@ -183,9 +201,15 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, struct device_node *np; const struct iommu_ops *ops = NULL; int idx = 0; + struct device *bridge; + + if (dev_is_pci(dev)) { + bridge = pci_get_host_bridge_device(to_pci_dev(dev)); - if (dev_is_pci(dev)) - return of_pci_iommu_configure(to_pci_dev(dev), master_np); + if (bridge && bridge->parent && bridge->parent->of_node) + return of_pci_iommu_configure(to_pci_dev(dev), + bridge->parent->of_node); + } /* * We don't currently walk up the tree looking for a parent IOMMU. @@ -198,6 +222,14 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, np = iommu_spec.np; ops = of_iommu_get_ops(np); + if (!ops) { + const struct of_device_id *oid; + + oid = of_match_node(&__iommu_of_table, np); + ops = oid ? ERR_PTR(-EPROBE_DEFER) : NULL; + goto err_put_node; + } + if (!ops || !ops->of_xlate || iommu_fwspec_init(dev, &np->fwnode, ops) || ops->of_xlate(dev, &iommu_spec)) @@ -207,11 +239,18 @@ const struct iommu_ops *of_iommu_configure(struct device *dev, idx++; } + if (ops && ops->add_device) { + ops = (ops->add_device(dev) == 0) ? ops : NULL; + + if (!ops) + dev_err(dev, "Failed to setup iommu_ops\n"); + } + return ops; err_put_node: of_node_put(np); - return NULL; + return ops; } static int __init of_iommu_init(void) @@ -222,7 +261,7 @@ static int __init of_iommu_init(void) for_each_matching_node_and_match(np, matches, &match) { const of_iommu_init_fn init_fn = match->data; - if (init_fn(np)) + if (init_fn && init_fn(np)) pr_err("Failed to initialise IOMMU %s\n", of_node_full_name(np)); } diff --git a/drivers/of/device.c b/drivers/of/device.c index 1c843e2..c8e74d7 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -82,7 +82,7 @@ int of_device_add(struct platform_device *ofdev) * can use a platform bus notifier and handle BUS_NOTIFY_ADD_DEVICE events * to fix up DMA configuration. */ -void of_dma_configure(struct device *dev, struct device_node *np) +int of_dma_configure(struct device *dev, struct device_node *np) { u64 dma_addr, paddr, size; int ret; @@ -129,10 +129,15 @@ void of_dma_configure(struct device *dev, struct device_node *np) coherent ? " " : " not "); iommu = of_iommu_configure(dev, np); + if (IS_ERR(iommu)) + return PTR_ERR(iommu); + dev_dbg(dev, "device is%sbehind an iommu\n", iommu ? " " : " not "); arch_setup_dma_ops(dev, dma_addr, size, iommu, coherent); + + return 0; } EXPORT_SYMBOL_GPL(of_dma_configure); diff --git a/include/linux/of_device.h b/include/linux/of_device.h index d20a31a..2bdb872 100644 --- a/include/linux/of_device.h +++ b/include/linux/of_device.h @@ -55,7 +55,7 @@ static inline struct device_node *of_cpu_device_node_get(int cpu) return of_node_get(cpu_dev->of_node); } -void of_dma_configure(struct device *dev, struct device_node *np); +int of_dma_configure(struct device *dev, struct device_node *np); void of_dma_deconfigure(struct device *dev); #else /* CONFIG_OF */ @@ -100,7 +100,9 @@ static inline struct device_node *of_cpu_device_node_get(int cpu) return NULL; } static inline void of_dma_configure(struct device *dev, struct device_node *np) -{} +{ + return 0; +} static inline void of_dma_deconfigure(struct device *dev) {} #endif /* CONFIG_OF */