| Message ID | 1476800897-19898-11-git-send-email-vivek.gautam@codeaurora.org (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On 2016-10-18 07:28, Vivek Gautam wrote: > The common layer phy exit callback ufs_qcom_phy_exit() > calls phy_power_off() that has no meaning when phy_power_off() > callback is already registered with the phy provider and > the consumer makes use of the same. > Instead, add a no-op specific phy_exit() callback for now > to add the exit sequence at a later point. > > Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> > --- > > New patch added in v2 series. > > drivers/phy/phy-qcom-ufs-i.h | 1 - > drivers/phy/phy-qcom-ufs-qmp-14nm.c | 7 ++++++- > drivers/phy/phy-qcom-ufs-qmp-20nm.c | 7 ++++++- > drivers/phy/phy-qcom-ufs.c | 17 ++++++----------- > 4 files changed, 18 insertions(+), 14 deletions(-) > > diff --git a/drivers/phy/phy-qcom-ufs-i.h > b/drivers/phy/phy-qcom-ufs-i.h > index 69e836d..d505d98 100644 > --- a/drivers/phy/phy-qcom-ufs-i.h > +++ b/drivers/phy/phy-qcom-ufs-i.h > @@ -141,7 +141,6 @@ struct ufs_qcom_phy_specific_ops { > struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy); > int ufs_qcom_phy_power_on(struct phy *generic_phy); > int ufs_qcom_phy_power_off(struct phy *generic_phy); > -int ufs_qcom_phy_exit(struct phy *generic_phy); > int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common); > int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common); > int ufs_qcom_phy_remove(struct phy *generic_phy, > diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c > b/drivers/phy/phy-qcom-ufs-qmp-14nm.c > index a60cf34..061604f 100644 > --- a/drivers/phy/phy-qcom-ufs-qmp-14nm.c > +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.c > @@ -47,6 +47,11 @@ static int ufs_qcom_phy_qmp_14nm_init(struct phy > *generic_phy) > return 0; > } > > +static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy) > +{ > + return 0; > +} > + > static > void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, > bool val) > { > @@ -94,7 +99,7 @@ static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct > ufs_qcom_phy *phy_common) > > static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = { > .init = ufs_qcom_phy_qmp_14nm_init, > - .exit = ufs_qcom_phy_exit, > + .exit = ufs_qcom_phy_qmp_14nm_exit, > .power_on = ufs_qcom_phy_power_on, > .power_off = ufs_qcom_phy_power_off, > .owner = THIS_MODULE, > diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c > b/drivers/phy/phy-qcom-ufs-qmp-20nm.c > index dfc5175..1a26a64 100644 > --- a/drivers/phy/phy-qcom-ufs-qmp-20nm.c > +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c > @@ -66,6 +66,11 @@ static int ufs_qcom_phy_qmp_20nm_init(struct phy > *generic_phy) > return 0; > } > > +static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy) > +{ > + return 0; > +} > + > static > void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, > bool val) > { > @@ -152,7 +157,7 @@ static int > ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) > > static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = { > .init = ufs_qcom_phy_qmp_20nm_init, > - .exit = ufs_qcom_phy_exit, > + .exit = ufs_qcom_phy_qmp_20nm_exit, > .power_on = ufs_qcom_phy_power_on, > .power_off = ufs_qcom_phy_power_off, > .owner = THIS_MODULE, > diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c > index a425cc2..494f90f 100644 > --- a/drivers/phy/phy-qcom-ufs.c > +++ b/drivers/phy/phy-qcom-ufs.c > @@ -615,17 +615,6 @@ int ufs_qcom_phy_calibrate_phy(struct phy > *generic_phy, bool is_rate_B) > } > EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy); > > -int ufs_qcom_phy_exit(struct phy *generic_phy) > -{ > - struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); > - > - if (ufs_qcom_phy->is_powered_on) > - phy_power_off(generic_phy); > - > - return 0; > -} > -EXPORT_SYMBOL_GPL(ufs_qcom_phy_exit); > - > int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy) > { > struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); > @@ -647,6 +636,9 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy) > struct device *dev = phy_common->dev; > int err; > > + if (phy_common->is_powered_on) > + return 0; > + > err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy); > if (err) { > dev_err(dev, "%s enable vdda_phy failed, err=%d\n", > @@ -709,6 +701,9 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy) > { > struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); > > + if (!phy_common->is_powered_on) > + return 0; > + > phy_common->phy_spec_ops->power_control(phy_common, false); > > if (phy_common->vddp_ref_clk.reg) LGTM , Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org>
diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/phy-qcom-ufs-i.h index 69e836d..d505d98 100644 --- a/drivers/phy/phy-qcom-ufs-i.h +++ b/drivers/phy/phy-qcom-ufs-i.h @@ -141,7 +141,6 @@ struct ufs_qcom_phy_specific_ops { struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy); int ufs_qcom_phy_power_on(struct phy *generic_phy); int ufs_qcom_phy_power_off(struct phy *generic_phy); -int ufs_qcom_phy_exit(struct phy *generic_phy); int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common); int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common); int ufs_qcom_phy_remove(struct phy *generic_phy, diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/phy-qcom-ufs-qmp-14nm.c index a60cf34..061604f 100644 --- a/drivers/phy/phy-qcom-ufs-qmp-14nm.c +++ b/drivers/phy/phy-qcom-ufs-qmp-14nm.c @@ -47,6 +47,11 @@ static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy) return 0; } +static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy) +{ + return 0; +} + static void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val) { @@ -94,7 +99,7 @@ static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = { .init = ufs_qcom_phy_qmp_14nm_init, - .exit = ufs_qcom_phy_exit, + .exit = ufs_qcom_phy_qmp_14nm_exit, .power_on = ufs_qcom_phy_power_on, .power_off = ufs_qcom_phy_power_off, .owner = THIS_MODULE, diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/phy-qcom-ufs-qmp-20nm.c index dfc5175..1a26a64 100644 --- a/drivers/phy/phy-qcom-ufs-qmp-20nm.c +++ b/drivers/phy/phy-qcom-ufs-qmp-20nm.c @@ -66,6 +66,11 @@ static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy) return 0; } +static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy) +{ + return 0; +} + static void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val) { @@ -152,7 +157,7 @@ static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common) static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = { .init = ufs_qcom_phy_qmp_20nm_init, - .exit = ufs_qcom_phy_exit, + .exit = ufs_qcom_phy_qmp_20nm_exit, .power_on = ufs_qcom_phy_power_on, .power_off = ufs_qcom_phy_power_off, .owner = THIS_MODULE, diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c index a425cc2..494f90f 100644 --- a/drivers/phy/phy-qcom-ufs.c +++ b/drivers/phy/phy-qcom-ufs.c @@ -615,17 +615,6 @@ int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool is_rate_B) } EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy); -int ufs_qcom_phy_exit(struct phy *generic_phy) -{ - struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); - - if (ufs_qcom_phy->is_powered_on) - phy_power_off(generic_phy); - - return 0; -} -EXPORT_SYMBOL_GPL(ufs_qcom_phy_exit); - int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy) { struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy); @@ -647,6 +636,9 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy) struct device *dev = phy_common->dev; int err; + if (phy_common->is_powered_on) + return 0; + err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy); if (err) { dev_err(dev, "%s enable vdda_phy failed, err=%d\n", @@ -709,6 +701,9 @@ int ufs_qcom_phy_power_off(struct phy *generic_phy) { struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy); + if (!phy_common->is_powered_on) + return 0; + phy_common->phy_spec_ops->power_control(phy_common, false); if (phy_common->vddp_ref_clk.reg)
The common layer phy exit callback ufs_qcom_phy_exit() calls phy_power_off() that has no meaning when phy_power_off() callback is already registered with the phy provider and the consumer makes use of the same. Instead, add a no-op specific phy_exit() callback for now to add the exit sequence at a later point. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> --- New patch added in v2 series. drivers/phy/phy-qcom-ufs-i.h | 1 - drivers/phy/phy-qcom-ufs-qmp-14nm.c | 7 ++++++- drivers/phy/phy-qcom-ufs-qmp-20nm.c | 7 ++++++- drivers/phy/phy-qcom-ufs.c | 17 ++++++----------- 4 files changed, 18 insertions(+), 14 deletions(-)