From patchwork Wed Oct 19 10:43:46 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Vivek Gautam X-Patchwork-Id: 9384719 Return-Path: Received: from mail.wl.linuxfoundation.org (pdx-wl-mail.web.codeaurora.org [172.30.200.125]) by pdx-korg-patchwork.web.codeaurora.org (Postfix) with ESMTP id 03209607D0 for ; Wed, 19 Oct 2016 16:09:21 +0000 (UTC) Received: from mail.wl.linuxfoundation.org (localhost [127.0.0.1]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id E75F92833B for ; Wed, 19 Oct 2016 16:09:20 +0000 (UTC) Received: by mail.wl.linuxfoundation.org (Postfix, from userid 486) id DC4D528437; Wed, 19 Oct 2016 16:09:20 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on pdx-wl-mail.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-6.8 required=2.0 tests=BAYES_00,DKIM_SIGNED, RCVD_IN_DNSWL_HI,T_DKIM_INVALID autolearn=unavailable version=3.3.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.wl.linuxfoundation.org (Postfix) with ESMTP id AE5F628407 for ; Wed, 19 Oct 2016 16:09:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S941935AbcJSQI2 (ORCPT ); Wed, 19 Oct 2016 12:08:28 -0400 Received: from smtp.codeaurora.org ([198.145.29.96]:33134 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S941792AbcJSOVk (ORCPT ); Wed, 19 Oct 2016 10:21:40 -0400 Received: by smtp.codeaurora.org (Postfix, from userid 1000) id 0273461ADF; Wed, 19 Oct 2016 10:44:03 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=codeaurora.org; s=default; t=1476873844; bh=uZmpDV2d6CeU8ofX/XK8i8FZSEJG2WqlBu0yuJ1BLE0=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=eF90Hwaq+9immBKCSmNUXzNOb3qlgaYky4JYH2F6P+dpGOOq/CRURT+gM/qRTCGpI juivnUpliGQzD243uovYkmqYLfVSWwrlymBO6lkQKR/l3/RO0Sp9+9V4bFKnbu1lQL f+hmcyA1eV00leFhRPtTE4KWBKWX1juDHFgdasXI= Received: from blr-ubuntu-41.ap.qualcomm.com (unknown [202.46.23.61]) (using TLSv1.1 with cipher ECDHE-RSA-AES128-SHA (128/128 bits)) (No client certificate requested) (Authenticated sender: vivek.gautam@smtp.codeaurora.org) by smtp.codeaurora.org (Postfix) with ESMTPSA id DC1C161ADE; Wed, 19 Oct 2016 10:43:59 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=codeaurora.org; s=default; t=1476873842; bh=uZmpDV2d6CeU8ofX/XK8i8FZSEJG2WqlBu0yuJ1BLE0=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=M2iqyTB5r7WyZKiSpukk77CH662iqhGVhskLEY02k9pFt4GOo3j3q0FztODvCqbbO VE4phs9EOnE+QNftZOSIVO6GRZwcDiM60PZ6cQd3W3g7JaP+4C6uQlpmeSWS3RCXjT HLTlVbrK/Gtj6Y29EDJEAoK8doBjTvPGE+vy3ots= DMARC-Filter: OpenDMARC Filter v1.3.1 smtp.codeaurora.org DC1C161ADE Authentication-Results: pdx-caf-mail.web.codeaurora.org; dmarc=none header.from=codeaurora.org Authentication-Results: pdx-caf-mail.web.codeaurora.org; spf=pass smtp.mailfrom=vivek.gautam@codeaurora.org From: Vivek Gautam To: kishon@ti.com, robh+dt@kernel.org, mark.rutland@arm.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Vivek Gautam Subject: [PATCH 1/2] phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips Date: Wed, 19 Oct 2016 16:13:46 +0530 Message-Id: <1476873827-7191-2-git-send-email-vivek.gautam@codeaurora.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1476873827-7191-1-git-send-email-vivek.gautam@codeaurora.org> References: <1476873827-7191-1-git-send-email-vivek.gautam@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP PHY transceiver driver for QUSB2 phy controller that provides HighSpeed functionality for DWC3 controller present on Qualcomm chipsets. This driver is based on phy-msm-qusb driver available in msm-4.4 kernel @codeaurora[1] [1] https://source.codeaurora.org/quic/la/kernel/msm-4.4/log/?h=caf/3.18/msm-3.18 Signed-off-by: Vivek Gautam Cc: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 37 ++ drivers/phy/Kconfig | 10 + drivers/phy/Makefile | 1 + drivers/phy/phy-qcom-qusb2.c | 577 +++++++++++++++++++++ 4 files changed, 625 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt create mode 100644 drivers/phy/phy-qcom-qusb2.c diff --git a/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt new file mode 100644 index 0000000..97c9ce7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt @@ -0,0 +1,37 @@ +Qualcomm QUSB2 phy controller +============================= + +QUSB2 controller supports LS/FS/HS usb connectivity on Qualcomm chipsets. + +Required properties: + - compatible: compatible list, contains "qcom,msm8996-qusb2-phy". + - reg: offset and length of the PHY register set. + - #phy-cells: must be 0. + + - clocks: a list of phandles and clock-specifier pairs, + one for each entry in clock-names. + - clock-names: must be "cfg_ahb" for phy config clock, + "ref_clk" for 19.2 MHz ref clk, + "ref_clk_src" reference clock source. + "iface" for phy interface clock (Optional). + + - vdd-phy-supply: Phandle to a regulator supply to PHY core block. + - vdda-pll-supply: Phandle to 1.8V regulator supply to PHY refclk pll block. + - vdda-phy-dpdm: Phandle to 3.1V regulator supply to Dp/Dm port signals. + + - resets: a list of phandles and reset controller specifier pairs, + one for each entry in reset-names. + - reset-names: must be "phy" for reset of phy block. + +Optional properties: + - nvmem-cells: a list of phandles to nvmem cells that contain fused + tuning parameters for qusb2 phy, one for each entry + in nvmem-cell-names. + - nvmem-cell-names: must be "tune2_hstx_trim_efuse" for cell containing + HS Tx trim value. + - qcom,hstx-trim-bit-offset: bit offset within nvmem cell for + HS Tx trim value. + - qcom,hstx-trim-bit-len: bit length of HS Tx trim value within nvmem cell. + + - qcom,tcsr-syscon: Phandle to TCSR syscon register region. + - qcom,phy-clk-scheme: Offset to TCSR_PHY_CLK_SCHEME_SEL register. diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index fe00f91..5547984 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -446,6 +446,16 @@ config PHY_STIH41X_USB Enable this to support the USB transceiver that is part of STMicroelectronics STiH41x SoC series. +config PHY_QCOM_QUSB2 + tristate "Qualcomm QUSB2 PHY Driver" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable this to support the HighSpeed QUSB2 PHY transceiver for USB + controllers on Qualcomm chips. This driver supports the high-speed + PHY which is usually paired with either the ChipIdea or Synopsys DWC3 + USB IPs on MSM SOCs. + config PHY_QCOM_UFS tristate "Qualcomm UFS PHY driver" depends on OF && ARCH_QCOM diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index a534cf5..848489d 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -51,6 +51,7 @@ obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o obj-$(CONFIG_PHY_STIH41X_USB) += phy-stih41x-usb.o +obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o diff --git a/drivers/phy/phy-qcom-qusb2.c b/drivers/phy/phy-qcom-qusb2.c new file mode 100644 index 0000000..058f661 --- /dev/null +++ b/drivers/phy/phy-qcom-qusb2.c @@ -0,0 +1,577 @@ +/* + * Copyright (c) 2016, The Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define QUSB2PHY_PLL_TEST 0x04 +#define CLK_REF_SEL BIT(7) + +#define QUSB2PHY_PLL_TUNE 0x08 +#define QUSB2PHY_PLL_USER_CTL1 0x0c +#define QUSB2PHY_PLL_USER_CTL2 0x10 +#define QUSB2PHY_PLL_AUTOPGM_CTL1 0x1c +#define QUSB2PHY_PLL_PWR_CTRL 0x18 + +#define QUSB2PHY_PLL_STATUS 0x38 +#define PLL_LOCKED BIT(5) + +#define QUSB2PHY_PORT_TUNE1 0x80 + +#define QUSB2PHY_PORT_TUNE2 0x84 +/* TUNE2's high nibble value read from efuse */ +#define TUNE2_HIGH_NIBBLE_VAL(val, pos, mask) ((val >> pos) & mask) + +#define QUSB2PHY_PORT_TUNE3 0x88 +#define QUSB2PHY_PORT_TUNE4 0x8C +#define QUSB2PHY_PORT_TUNE5 0x90 +#define QUSB2PHY_PORT_TEST2 0x9c + +#define QUSB2PHY_PORT_POWERDOWN 0xB4 +#define CLAMP_N_EN BIT(5) +#define FREEZIO_N BIT(1) +#define POWER_DOWN BIT(0) + +#define QUSB2PHY_REFCLK_ENABLE BIT(0) + +#define PHY_CLK_SCHEME_SEL BIT(0) + +struct qusb2_phy_init_tbl { + unsigned int reg_offset; + unsigned int cfg_val; +}; +#define QCOM_QUSB2_PHY_INIT_CFG(reg, val) \ + { \ + .reg_offset = reg, \ + .cfg_val = val, \ + } + +static struct qusb2_phy_init_tbl msm8996_phy_init_tbl[] = { + QCOM_QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE1, 0xF8), + QCOM_QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE2, 0xB3), + QCOM_QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE3, 0x83), + QCOM_QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TUNE4, 0xC0), + QCOM_QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_TUNE, 0x30), + QCOM_QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL1, 0x79), + QCOM_QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_USER_CTL2, 0x21), + QCOM_QUSB2_PHY_INIT_CFG(QUSB2PHY_PORT_TEST2, 0x14), + QCOM_QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_AUTOPGM_CTL1, 0x9F), + QCOM_QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00), +}; + +struct qusb2_phy_init_cfg { + struct qusb2_phy_init_tbl *phy_init_tbl; + int phy_init_tbl_sz; +}; + +const struct qusb2_phy_init_cfg msm8996_phy_init_cfg = { + .phy_init_tbl = msm8996_phy_init_tbl, + .phy_init_tbl_sz = ARRAY_SIZE(msm8996_phy_init_tbl), +}; + +/** + * struct qusb2_phy: Structure holding qusb2 phy attributes. + * + * @phy: pointer to generic phy. + * @base: pointer to iomapped memory space for qubs2 phy. + * + * @cfg_ahb_clk: pointer to AHB2PHY interface clock. + * @ref_clk: pointer to reference clock. + * @ref_clk_src: pointer to source to reference clock. + * @iface_src: pointer to phy interface clock. + * @clk_enabled: check if clocks are enabled. + * + * @phy_reset: Pointer to phy reset control + * + * @vdda_phy: vdd supply to the phy core block. + * @vdda_pll: 1.8V vdd supply to ref_clk block. + * @vdda_phy_dpdm: 3.1V vdd supply to Dp/Dm port signals. + * @pwr_enabled: check if the regulators are enabled. + * @tcsr: pointer to TCSR syscon register map. + * @clk_scheme_offset: offset to PHY_CLK_SCHEME register in TCSR map. + * @cfg: phy initialization config data + */ +struct qusb2_phy { + struct phy *phy; + void __iomem *base; + + struct clk *cfg_ahb_clk; + struct clk *ref_clk; + struct clk *ref_clk_src; + struct clk *iface_clk; + bool clk_enabled; + + struct reset_control *phy_reset; + + struct regulator *vdd_phy; + struct regulator *vdda_pll; + struct regulator *vdda_phy_dpdm; + bool pwr_enabled; + + struct regmap *tcsr; + unsigned int clk_scheme_offset; + + const struct qusb2_phy_init_cfg *cfg; +}; + +static inline void qusb2_set_bits(void __iomem *reg, u32 mask) +{ + u32 val; + + val = readl_relaxed(reg); + val |= mask; + writel_relaxed(val, reg); + + /* Ensure above write is completed */ + mb(); +} + +static inline void qusb2_clr_bits(void __iomem *reg, u32 mask) +{ + u32 val; + + val = readl_relaxed(reg); + val &= ~mask; + writel_relaxed(val, reg); + + /* Ensure above write is completed */ + mb(); +} + +static void qcom_qusb2_phy_configure(void __iomem *base, + struct qusb2_phy_init_tbl init_tbl[], + int init_tbl_sz) +{ + int i; + + for (i = 0; i < init_tbl_sz; i++) { + writel_relaxed(init_tbl[i].cfg_val, + base + init_tbl[i].reg_offset); + } + + /* flush buffered writes */ + mb(); +} + +static void qusb2_phy_enable_clocks(struct qusb2_phy *qphy, bool on) +{ + dev_dbg(&qphy->phy->dev, "%s(): clocks_enabled:%d on:%d\n", + __func__, qphy->clk_enabled, on); + + if (!qphy->clk_enabled && on) { + clk_prepare_enable(qphy->cfg_ahb_clk); + if (qphy->iface_clk) + clk_prepare_enable(qphy->iface_clk); + clk_prepare_enable(qphy->ref_clk_src); + qphy->clk_enabled = true; + } + + if (qphy->clk_enabled && !on) { + clk_disable_unprepare(qphy->ref_clk_src); + if (qphy->iface_clk) + clk_disable_unprepare(qphy->iface_clk); + clk_disable_unprepare(qphy->cfg_ahb_clk); + qphy->clk_enabled = false; + } + + dev_dbg(&qphy->phy->dev, "%s(): clocks_enabled:%d\n", __func__, + qphy->clk_enabled); +} + +static int qusb2_phy_enable_power(struct qusb2_phy *qphy, bool on) +{ + int ret = 0; + struct device *dev = &qphy->phy->dev; + + dev_dbg(dev, "%s(): turn %s regulators. power_enabled:%d\n", + __func__, on ? "on" : "off", qphy->pwr_enabled); + + if (qphy->pwr_enabled == on) + return 0; + + if (!on) + goto disable_vdda_phy_dpdm; + + ret = regulator_enable(qphy->vdd_phy); + if (ret) { + dev_err(dev, "Unable to enable vdd-phy:%d\n", ret); + goto err_vdd_phy; + } + + ret = regulator_enable(qphy->vdda_pll); + if (ret) { + dev_err(dev, "Unable to enable vdda-pll:%d\n", ret); + goto disable_vdd_phy; + } + + ret = regulator_enable(qphy->vdda_phy_dpdm); + if (ret) { + dev_err(dev, "Unable to enable vdda-phy-dpdm:%d\n", ret); + goto disable_vdda_pll; + } + + qphy->pwr_enabled = true; + dev_dbg(dev, "%s() regulators are turned on.\n", __func__); + + return ret; + +disable_vdda_phy_dpdm: + regulator_disable(qphy->vdda_phy_dpdm); +disable_vdda_pll: + regulator_disable(qphy->vdda_pll); +disable_vdd_phy: + regulator_disable(qphy->vdd_phy); +err_vdd_phy: + qphy->pwr_enabled = false; + dev_dbg(dev, "%s() regulators are turned off.\n", __func__); + return ret; +} + +/* + * Fetches HS Tx tuning value from e-fuse and sets QUSB2PHY_PORT_TUNE2 + * register. + * For any error case, skip setting the value and use the default value. + */ +static int qusb2_phy_set_tune2_param(struct qusb2_phy *qphy) +{ + struct device *dev = &qphy->phy->dev; + struct nvmem_cell *cell; + unsigned int bit_mask; + u32 tune2_val; + int bit_offset = 0; + int bit_len = 0; + ssize_t len; + u32 *val; + int ret; + + /* + * Read EFUSE register having TUNE2 parameter's high nibble. + * If efuse register shows value as 0x0, or if we fail to find + * a valid efuse register settings, then use default value + * as 0xB for high nibble that we have already set while + * configuring phy. + */ + cell = devm_nvmem_cell_get(dev, "tune2_hstx_trim_efuse"); + if (IS_ERR(cell)) { + if (PTR_ERR(cell) == -EPROBE_DEFER) + return PTR_ERR(cell); + goto skip; + } + + val = (u32 *)nvmem_cell_read(cell, &len); + if (!IS_ERR(val)) { + ret = of_property_read_u32(dev->of_node, + "qcom,hstx-trim-bit-offset", + &bit_offset); + if (ret) { + dev_dbg(dev, "hstx-trim bit offset is invalid.\n"); + goto skip; + } + + ret = of_property_read_u32(dev->of_node, + "qcom,hstx-trim-bit-len", + &bit_len); + if (ret) { + dev_dbg(dev, "hstx-trim bit length is invalid.\n"); + goto skip; + } + + bit_mask = (1 << bit_len) - 1; + dev_dbg(dev, + "%s(): efuse value:%x, bit_mask:%x, bit_offset: %d\n", + __func__, val[0], bit_mask, bit_offset); + tune2_val = TUNE2_HIGH_NIBBLE_VAL(val[0], bit_offset, bit_mask); + if (!tune2_val) { + dev_dbg(dev, "hstx-trim bit length is invalid.\n"); + goto skip; + } + + /* Fused TUNE2 value is the higher nibble only */ + tune2_val = tune2_val << 0x4; + qusb2_set_bits(qphy->base + QUSB2PHY_PORT_TUNE2, tune2_val); + } else { + dev_dbg(dev, "failed reading hs-tx trim value: %d\n", ret); + } + +skip: + return 0; +} + +static int qusb2_phy_init(struct phy *phy) +{ + struct qusb2_phy *qphy = phy_get_drvdata(phy); + unsigned int reset_val; + unsigned int clk_scheme; + bool is_se_clk = false; + int ret; + + dev_info(&phy->dev, "Initializing QUSB2 phy\n"); + + ret = qusb2_phy_enable_power(qphy, true); + if (ret) + return ret; + + qusb2_phy_enable_clocks(qphy, true); + + /* Perform phy reset */ + ret = reset_control_assert(qphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "Failed to assert phy_reset\n"); + return ret; + } + usleep_range(100, 150); + ret = reset_control_deassert(qphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "Failed to de-assert phy_reset\n"); + return ret; + } + + /* Disable the PHY */ + qusb2_set_bits(qphy->base + QUSB2PHY_PORT_POWERDOWN, + CLAMP_N_EN | FREEZIO_N | POWER_DOWN); + + /* save reset value to override based on clk scheme */ + reset_val = readl_relaxed(qphy->base + QUSB2PHY_PLL_TEST); + + qcom_qusb2_phy_configure(qphy->base, qphy->cfg->phy_init_tbl, + qphy->cfg->phy_init_tbl_sz); + + /* Check for efuse value for tuning the PHY */ + ret = qusb2_phy_set_tune2_param(qphy); + if (ret) + return ret; + + /* Enable the PHY */ + qusb2_clr_bits(qphy->base + QUSB2PHY_PORT_POWERDOWN, POWER_DOWN); + + /* Require to get phy pll lock successfully */ + usleep_range(150, 160); + + /* + * Use differential clk by default; later we read TCSR_PHY_CLK_SCHEME + * register to check if Single-ended clock scheme is selected. If yes, + * then disable differential ref_clk and use single-ended clock. + */ + + if (qphy->tcsr) { + ret = regmap_read(qphy->tcsr, qphy->clk_scheme_offset, + &clk_scheme); + /* is SE-clk available ? */ + if (clk_scheme & PHY_CLK_SCHEME_SEL) { + dev_dbg(&phy->dev, "%s: select single-ended clk src\n", + __func__); + is_se_clk = true; + } + } + + if (is_se_clk) { + reset_val |= CLK_REF_SEL; + clk_disable_unprepare(qphy->ref_clk); + } else { + reset_val &= ~CLK_REF_SEL; + clk_prepare_enable(qphy->ref_clk); + } + + writel_relaxed(reset_val, qphy->base + QUSB2PHY_PLL_TEST); + + /* Make sure that above write is completed to get PLL source clock */ + wmb(); + + /* Required to get PHY PLL lock successfully */ + usleep_range(100, 110); + + if (!(readb_relaxed(qphy->base + QUSB2PHY_PLL_STATUS) & + PLL_LOCKED)) { + dev_err(&phy->dev, "QUSB PHY PLL LOCK fails:%x\n", + readb_relaxed(qphy->base + QUSB2PHY_PLL_STATUS)); + return -EBUSY; + } + + return 0; +} + +static int qusb2_phy_exit(struct phy *phy) +{ + struct qusb2_phy *qphy = phy_get_drvdata(phy); + + /* Disable the PHY */ + qusb2_set_bits(qphy->base + QUSB2PHY_PORT_POWERDOWN, + CLAMP_N_EN | FREEZIO_N | POWER_DOWN); + + qusb2_phy_enable_clocks(qphy, false); + qusb2_phy_enable_power(qphy, false); + + return 0; +} + +static const struct phy_ops qusb2_phy_gen_ops = { + .init = qusb2_phy_init, + .exit = qusb2_phy_exit, + .owner = THIS_MODULE, +}; + +static const struct of_device_id qusb2_phy_of_match_table[] = { + { + .compatible = "qcom,msm8996-qusb2-phy", + .data = &msm8996_phy_init_cfg, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, qusb2_phy_of_match_table); + +static int qusb2_phy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qusb2_phy *qphy; + struct phy_provider *phy_provider; + struct phy *generic_phy; + const struct of_device_id *match; + struct resource *res; + int ret = 0; + + qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL); + if (!qphy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + qphy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(qphy->base)) + return PTR_ERR(qphy->base); + + qphy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb_clk"); + if (IS_ERR(qphy->cfg_ahb_clk)) { + ret = PTR_ERR(qphy->cfg_ahb_clk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get cfg_ahb_clk\n"); + return ret; + } + + qphy->ref_clk_src = devm_clk_get(dev, "ref_clk_src"); + if (IS_ERR(qphy->ref_clk_src)) { + qphy->ref_clk_src = NULL; + ret = PTR_ERR(qphy->ref_clk_src); + if (ret != -EPROBE_DEFER) + dev_dbg(dev, "clk get failed for ref_clk_src\n"); + } + + qphy->ref_clk = devm_clk_get(dev, "ref_clk"); + if (IS_ERR(qphy->ref_clk)) { + qphy->ref_clk = NULL; + ret = PTR_ERR(qphy->ref_clk); + if (ret != -EPROBE_DEFER) + dev_dbg(dev, "clk get failed for ref_clk\n"); + } else { + clk_set_rate(qphy->ref_clk, 19200000); + } + + qphy->iface_clk = devm_clk_get(dev, "iface_clk"); + if (IS_ERR(qphy->iface_clk)) { + qphy->iface_clk = NULL; + ret = PTR_ERR(qphy->iface_clk); + if (ret != -EPROBE_DEFER) + dev_dbg(dev, "clk get failed for iface_clk\n"); + } + + qphy->phy_reset = devm_reset_control_get(&pdev->dev, "phy"); + if (IS_ERR(qphy->phy_reset)) { + dev_err(dev, "failed to get phy core reset\n"); + return PTR_ERR(qphy->phy_reset); + } + + qphy->vdd_phy = devm_regulator_get(dev, "vdd-phy"); + if (IS_ERR(qphy->vdd_phy)) { + dev_err(dev, "unable to get vdd-phy supply\n"); + return PTR_ERR(qphy->vdd_phy); + } + + qphy->vdda_pll = devm_regulator_get(dev, "vdda-pll"); + if (IS_ERR(qphy->vdda_pll)) { + dev_err(dev, "unable to get vdda-pll supply\n"); + return PTR_ERR(qphy->vdda_pll); + } + + qphy->vdda_phy_dpdm = devm_regulator_get(dev, "vdda-phy-dpdm"); + if (IS_ERR(qphy->vdda_phy_dpdm)) { + dev_err(dev, "unable to get vdda-phy-dpdm supply\n"); + return PTR_ERR(qphy->vdda_phy_dpdm); + } + + /* Get the specific init parameters of QMP phy */ + match = of_match_node(qusb2_phy_of_match_table, dev->of_node); + qphy->cfg = match->data; + + qphy->tcsr = syscon_regmap_lookup_by_phandle(dev->of_node, + "qcom,tcsr-syscon"); + if (!IS_ERR(qphy->tcsr)) { + ret = of_property_read_u32(dev->of_node, "qcom,phy-clk-scheme", + &qphy->clk_scheme_offset); + if (ret) { + dev_err(dev, "phy-clk-scheme reg offset is invalid\n"); + qphy->tcsr = NULL; + return ret; + } + } else { + dev_dbg(dev, "Failed to lookup TCSR regmap\n"); + qphy->tcsr = NULL; + } + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + ret = PTR_ERR(phy_provider); + dev_err(dev, "%s: failed to register phy %d\n", __func__, ret); + return ret; + } + + generic_phy = devm_phy_create(dev, NULL, &qusb2_phy_gen_ops); + if (IS_ERR(generic_phy)) { + ret = PTR_ERR(generic_phy); + dev_err(dev, "%s: failed to create phy %d\n", __func__, ret); + generic_phy = NULL; + return ret; + } + qphy->phy = generic_phy; + + dev_set_drvdata(dev, qphy); + phy_set_drvdata(generic_phy, qphy); + + return ret; +} + +static struct platform_driver qusb2_phy_driver = { + .probe = qusb2_phy_probe, + .driver = { + .name = "qcom-qusb2-phy", + .of_match_table = of_match_ptr(qusb2_phy_of_match_table), + }, +}; + +module_platform_driver(qusb2_phy_driver); + +MODULE_AUTHOR("Vivek Gautam "); +MODULE_DESCRIPTION("Qualcomm QUSB2 PHY driver"); +MODULE_LICENSE("GPL v2");