diff mbox

[v5,2/7] remoteproc: qcom: Add and initialize proxy and active clocks.

Message ID 1481803546-31592-3-git-send-email-akdwived@codeaurora.org (mailing list archive)
State Not Applicable, archived
Delegated to: Andy Gross
Headers show

Commit Message

Dwivedi, Avaneesh Kumar (avani) Dec. 15, 2016, 12:05 p.m. UTC
Certain regulators and clocks need voting by rproc on behalf of hexagon
only during restart operation but certain clocks and voltage need to be
voted till hexagon is up, these regulators and clocks are identified as
proxy and active resource respectively, whose handle is being obtained
by supplying proxy and active clock name string.

Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_pil.c | 65 +++++++++++++++++++++++++++-----------
 1 file changed, 47 insertions(+), 18 deletions(-)
diff mbox

Patch

diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index d875448..8c8b239 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -95,6 +95,8 @@ 
 
 struct rproc_hexagon_res {
 	const char *hexagon_mba_image;
+	char **proxy_clk_string;
+	char **active_clk_string;
 };
 
 struct q6v5 {
@@ -114,6 +116,11 @@  struct q6v5 {
 	struct qcom_smem_state *state;
 	unsigned stop_bit;
 
+	struct clk *active_clks[8];
+	struct clk *proxy_clks[4];
+	int active_clk_count;
+	int proxy_clk_count;
+
 	struct regulator_bulk_data supply[4];
 
 	struct clk *ahb_clk;
@@ -706,27 +713,33 @@  static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
 	return 0;
 }
 
-static int q6v5_init_clocks(struct q6v5 *qproc)
+static int q6v5_init_clocks(struct device *dev, struct clk **clks,
+		char **clk_str)
 {
-	qproc->ahb_clk = devm_clk_get(qproc->dev, "iface");
-	if (IS_ERR(qproc->ahb_clk)) {
-		dev_err(qproc->dev, "failed to get iface clock\n");
-		return PTR_ERR(qproc->ahb_clk);
-	}
+	int count = 0;
+	int i;
 
-	qproc->axi_clk = devm_clk_get(qproc->dev, "bus");
-	if (IS_ERR(qproc->axi_clk)) {
-		dev_err(qproc->dev, "failed to get bus clock\n");
-		return PTR_ERR(qproc->axi_clk);
-	}
+	if (!clk_str)
+		return 0;
+
+	while (clk_str[count])
+		count++;
+
+	for (i = 0; i < count; i++) {
+		clks[i] = devm_clk_get(dev, clk_str[i]);
+		if (IS_ERR(clks[i])) {
+
+			int rc = PTR_ERR(clks[i]);
+
+			if (rc != -EPROBE_DEFER)
+				dev_err(dev, "Failed to get %s clock\n",
+					clk_str[i]);
+			return rc;
+		}
 
-	qproc->rom_clk = devm_clk_get(qproc->dev, "mem");
-	if (IS_ERR(qproc->rom_clk)) {
-		dev_err(qproc->dev, "failed to get mem clock\n");
-		return PTR_ERR(qproc->rom_clk);
 	}
 
-	return 0;
+	return count;
 }
 
 static int q6v5_init_reset(struct q6v5 *qproc)
@@ -843,9 +856,21 @@  static int q6v5_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	ret = q6v5_init_clocks(qproc);
-	if (ret)
+	ret = q6v5_init_clocks(&pdev->dev, qproc->proxy_clks,
+					desc->proxy_clk_string);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to setup proxy clocks.\n");
+		goto free_rproc;
+	}
+	qproc->proxy_clk_count = ret;
+
+	ret = q6v5_init_clocks(&pdev->dev, qproc->active_clks,
+					desc->active_clk_string);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to setup active clocks.\n");
 		goto free_rproc;
+	}
+	qproc->active_clk_count = ret;
 
 	ret = q6v5_regulator_init(qproc);
 	if (ret)
@@ -901,10 +926,14 @@  static int q6v5_remove(struct platform_device *pdev)
 
 static const struct rproc_hexagon_res msm8916_mss = {
 	.hexagon_mba_image = "mba.mbn",
+	.proxy_clk_string = (char*[]){"xo", NULL},
+	.active_clk_string = (char*[]){"iface", "bus", "mem", NULL},
 };
 
 static const struct rproc_hexagon_res msm8974_mss = {
 	.hexagon_mba_image = "mba.b00",
+	.proxy_clk_string = (char*[]){"xo", NULL},
+	.active_clk_string = (char*[]){"iface", "bus", "mem", NULL},
 };
 static const struct of_device_id q6v5_of_match[] = {
 	{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},