diff mbox

[v5,3/7] remoteproc: qcom: Add and initialize proxy and active regulators.

Message ID 1481804490-8583-4-git-send-email-akdwived@codeaurora.org (mailing list archive)
State Not Applicable, archived
Delegated to: Andy Gross
Headers show

Commit Message

Dwivedi, Avaneesh Kumar (avani) Dec. 15, 2016, 12:21 p.m. UTC
Certain regulators and clocks need voting by rproc on behalf of hexagon
only during restart operation but certain clocks and voltage need to be
voted till hexagon is up, these regulators and clocks are identified as
proxy and active resource respectively, whose handle is being obtained
by supplying proxy and active regulator string name.

Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_pil.c | 118 +++++++++++++++++++++++++++++++------
 1 file changed, 100 insertions(+), 18 deletions(-)

Comments

Bjorn Andersson Dec. 22, 2016, 9:46 p.m. UTC | #1
On Thu 15 Dec 04:21 PST 2016, Avaneesh Kumar Dwivedi wrote:

> -static int q6v5_regulator_init(struct q6v5 *qproc)
> +static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
> +				const struct qcom_mss_reg_res *reg_res)
>  {
> -	int ret;
> +	int count = 0;
> +	int rc;
> +	int i;
>  
> -	qproc->supply[Q6V5_SUPPLY_CX].supply = "cx";
> -	qproc->supply[Q6V5_SUPPLY_MX].supply = "mx";
> -	qproc->supply[Q6V5_SUPPLY_MSS].supply = "mss";
> -	qproc->supply[Q6V5_SUPPLY_PLL].supply = "pll";
> +	while (reg_res[count].supply)
> +	count++;
>  
> -	ret = devm_regulator_bulk_get(qproc->dev,
> -				      ARRAY_SIZE(qproc->supply), qproc->supply);
> -	if (ret < 0) {
> -		dev_err(qproc->dev, "failed to get supplies\n");
> -		return ret;
> -	}
> +	for (i = 0; i < count; i++) {

As with the clock init you can squash these two loops into one now.

[..]
>  static const struct rproc_hexagon_res msm8916_mss = {
>  	.hexagon_mba_image = "mba.mbn",
> +	.proxy_supply = (struct qcom_mss_reg_res[]) {
> +		{
> +			.supply = "mx",
> +			.uV = 1050000,
> +		},
> +		{
> +			.supply = "cx",
> +			.uA = 100000,
> +		},
> +		{
> +			.supply = "pll",
> +			.uA = 100000,
> +		},
> +		{ NULL }

It's idiomatic to use {} instead of { NULL }, so please update this (but
not in the clock patch).

As with the clock patch, please squash patch 4 into this one - so that
we have regulators before and after applying this single patch.

Regards,
Bjorn
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stephen Boyd Dec. 28, 2016, 11:38 p.m. UTC | #2
On 12/15, Avaneesh Kumar Dwivedi wrote:
> @@ -148,29 +167,34 @@ enum {
>  	Q6V5_SUPPLY_PLL,
>  };
>  
> -static int q6v5_regulator_init(struct q6v5 *qproc)
> +static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
> +				const struct qcom_mss_reg_res *reg_res)
>  {
> -	int ret;
> +	int count = 0;
> +	int rc;
> +	int i;
>  
> -	qproc->supply[Q6V5_SUPPLY_CX].supply = "cx";
> -	qproc->supply[Q6V5_SUPPLY_MX].supply = "mx";
> -	qproc->supply[Q6V5_SUPPLY_MSS].supply = "mss";
> -	qproc->supply[Q6V5_SUPPLY_PLL].supply = "pll";
> +	while (reg_res[count].supply)
> +	count++;

Indent that count++ please.
Dwivedi, Avaneesh Kumar (avani) Dec. 30, 2016, 11:02 a.m. UTC | #3
On 12/23/2016 3:16 AM, Bjorn Andersson wrote:
> On Thu 15 Dec 04:21 PST 2016, Avaneesh Kumar Dwivedi wrote:
>
>> -static int q6v5_regulator_init(struct q6v5 *qproc)
>> +static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
>> +				const struct qcom_mss_reg_res *reg_res)
>>   {
>> -	int ret;
>> +	int count = 0;
>> +	int rc;
>> +	int i;
>>   
>> -	qproc->supply[Q6V5_SUPPLY_CX].supply = "cx";
>> -	qproc->supply[Q6V5_SUPPLY_MX].supply = "mx";
>> -	qproc->supply[Q6V5_SUPPLY_MSS].supply = "mss";
>> -	qproc->supply[Q6V5_SUPPLY_PLL].supply = "pll";
>> +	while (reg_res[count].supply)
>> +	count++;
>>   
>> -	ret = devm_regulator_bulk_get(qproc->dev,
>> -				      ARRAY_SIZE(qproc->supply), qproc->supply);
>> -	if (ret < 0) {
>> -		dev_err(qproc->dev, "failed to get supplies\n");
>> -		return ret;
>> -	}
>> +	for (i = 0; i < count; i++) {
> As with the clock init you can squash these two loops into one now.
OK.
>
> [..]
>>   static const struct rproc_hexagon_res msm8916_mss = {
>>   	.hexagon_mba_image = "mba.mbn",
>> +	.proxy_supply = (struct qcom_mss_reg_res[]) {
>> +		{
>> +			.supply = "mx",
>> +			.uV = 1050000,
>> +		},
>> +		{
>> +			.supply = "cx",
>> +			.uA = 100000,
>> +		},
>> +		{
>> +			.supply = "pll",
>> +			.uA = 100000,
>> +		},
>> +		{ NULL }
> It's idiomatic to use {} instead of { NULL }, so please update this (but
> not in the clock patch).
OK.
>
> As with the clock patch, please squash patch 4 into this one - so that
> we have regulators before and after applying this single patch.
OK.
> Regards,
> Bjorn
diff mbox

Patch

diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 8c8b239..e95d118 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -93,8 +93,22 @@ 
 #define QDSS_BHS_ON			BIT(21)
 #define QDSS_LDO_BYP			BIT(22)
 
+struct reg_info {
+	struct regulator *reg;
+	int uV;
+	int uA;
+};
+
+struct qcom_mss_reg_res {
+	const char *supply;
+	int uV;
+	int uA;
+};
+
 struct rproc_hexagon_res {
 	const char *hexagon_mba_image;
+	struct qcom_mss_reg_res proxy_supply[4];
+	struct qcom_mss_reg_res active_supply[2];
 	char **proxy_clk_string;
 	char **active_clk_string;
 };
@@ -121,6 +135,11 @@  struct q6v5 {
 	int active_clk_count;
 	int proxy_clk_count;
 
+	struct reg_info active_regs[1];
+	struct reg_info proxy_regs[3];
+	int active_reg_count;
+	int proxy_reg_count;
+
 	struct regulator_bulk_data supply[4];
 
 	struct clk *ahb_clk;
@@ -148,29 +167,34 @@  enum {
 	Q6V5_SUPPLY_PLL,
 };
 
-static int q6v5_regulator_init(struct q6v5 *qproc)
+static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
+				const struct qcom_mss_reg_res *reg_res)
 {
-	int ret;
+	int count = 0;
+	int rc;
+	int i;
 
-	qproc->supply[Q6V5_SUPPLY_CX].supply = "cx";
-	qproc->supply[Q6V5_SUPPLY_MX].supply = "mx";
-	qproc->supply[Q6V5_SUPPLY_MSS].supply = "mss";
-	qproc->supply[Q6V5_SUPPLY_PLL].supply = "pll";
+	while (reg_res[count].supply)
+	count++;
 
-	ret = devm_regulator_bulk_get(qproc->dev,
-				      ARRAY_SIZE(qproc->supply), qproc->supply);
-	if (ret < 0) {
-		dev_err(qproc->dev, "failed to get supplies\n");
-		return ret;
-	}
+	for (i = 0; i < count; i++) {
+		regs[i].reg = devm_regulator_get(dev, reg_res[i].supply);
+		if (IS_ERR(regs[i].reg)) {
+			rc = PTR_ERR(regs[i].reg);
+			if (rc != -EPROBE_DEFER)
+				dev_err(dev, "Failed to get %s\n regulator",
+						reg_res[i].supply);
+			return rc;
+		}
 
-	regulator_set_load(qproc->supply[Q6V5_SUPPLY_CX].consumer, 100000);
-	regulator_set_load(qproc->supply[Q6V5_SUPPLY_MSS].consumer, 100000);
-	regulator_set_load(qproc->supply[Q6V5_SUPPLY_PLL].consumer, 10000);
+		regs[i].uV = reg_res[i].uV;
+		regs[i].uA = reg_res[i].uA;
+	}
 
-	return 0;
+	return count;
 }
 
+
 static int q6v5_regulator_enable(struct q6v5 *qproc)
 {
 	struct regulator *mss = qproc->supply[Q6V5_SUPPLY_MSS].consumer;
@@ -872,9 +896,21 @@  static int q6v5_probe(struct platform_device *pdev)
 	}
 	qproc->active_clk_count = ret;
 
-	ret = q6v5_regulator_init(qproc);
-	if (ret)
+	ret = q6v5_regulator_init(&pdev->dev, qproc->proxy_regs,
+					desc->proxy_supply);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to setup proxy regulators.\n");
 		goto free_rproc;
+	}
+	qproc->proxy_reg_count = ret;
+
+	ret = q6v5_regulator_init(&pdev->dev,  qproc->active_regs,
+					desc->active_supply);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to setup active regulators.\n");
+		goto free_rproc;
+	}
+	qproc->active_reg_count = ret;
 
 	ret = q6v5_init_reset(qproc);
 	if (ret)
@@ -926,12 +962,58 @@  static int q6v5_remove(struct platform_device *pdev)
 
 static const struct rproc_hexagon_res msm8916_mss = {
 	.hexagon_mba_image = "mba.mbn",
+	.proxy_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "mx",
+			.uV = 1050000,
+		},
+		{
+			.supply = "cx",
+			.uA = 100000,
+		},
+		{
+			.supply = "pll",
+			.uA = 100000,
+		},
+		{ NULL }
+	},
+	.active_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "mss",
+			.uV = 1050000,
+			.uA = 100000,
+		},
+		{ NULL }
+	},
 	.proxy_clk_string = (char*[]){"xo", NULL},
 	.active_clk_string = (char*[]){"iface", "bus", "mem", NULL},
 };
 
 static const struct rproc_hexagon_res msm8974_mss = {
 	.hexagon_mba_image = "mba.b00",
+	.proxy_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "mx",
+			.uV = 1050000,
+		},
+		{
+			.supply = "cx",
+			.uA = 100000,
+		},
+		{
+			.supply = "pll",
+			.uA = 100000,
+		},
+		{ NULL }
+	},
+	.active_supply = (struct qcom_mss_reg_res[]) {
+		{
+			.supply = "mss",
+			.uV = 1050000,
+			.uA = 100000,
+		},
+		{ NULL }
+	},
 	.proxy_clk_string = (char*[]){"xo", NULL},
 	.active_clk_string = (char*[]){"iface", "bus", "mem", NULL},
 };