diff mbox

[v5,04/17] phy: qcom-qusb2: Power-on PHY before initialization

Message ID 1516100232-18623-5-git-send-email-mgautam@codeaurora.org (mailing list archive)
State Not Applicable, archived
Delegated to: Andy Gross
Headers show

Commit Message

Manu Gautam Jan. 16, 2018, 10:56 a.m. UTC
PHY must be powered on before turning ON clocks and
attempting to initialize it. Driver is exposing
separate init and power_on routines for this.
Apparently USB dwc3 core driver performs power-on
after init. Also, poweron and init for QUSB2 PHY
need to be executed together always, hence remove
poweron callback from phy_ops and explicitly perform
this from init, similar changes needed for poweroff.

Signed-off-by: Manu Gautam <mgautam@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qusb2.c | 47 +++++++++++------------------------
 1 file changed, 15 insertions(+), 32 deletions(-)
diff mbox

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 6c57524..4a5b2a1 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -195,54 +195,31 @@  static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
 	qusb2_setbits(qphy->base, QUSB2PHY_PORT_TUNE2, val[0] << 0x4);
 }
 
-static int qusb2_phy_poweron(struct phy *phy)
+static int qusb2_phy_init(struct phy *phy)
 {
 	struct qusb2_phy *qphy = phy_get_drvdata(phy);
-	int num = ARRAY_SIZE(qphy->vregs);
+	unsigned int val;
+	unsigned int clk_scheme;
 	int ret;
 
-	dev_vdbg(&phy->dev, "%s(): Powering-on QUSB2 phy\n", __func__);
+	dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
 
 	/* turn on regulator supplies */
-	ret = regulator_bulk_enable(num, qphy->vregs);
+	ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
 	if (ret)
 		return ret;
 
 	ret = clk_prepare_enable(qphy->iface_clk);
 	if (ret) {
 		dev_err(&phy->dev, "failed to enable iface_clk, %d\n", ret);
-		regulator_bulk_disable(num, qphy->vregs);
-		return ret;
+		goto poweroff_phy;
 	}
 
-	return 0;
-}
-
-static int qusb2_phy_poweroff(struct phy *phy)
-{
-	struct qusb2_phy *qphy = phy_get_drvdata(phy);
-
-	clk_disable_unprepare(qphy->iface_clk);
-
-	regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
-
-	return 0;
-}
-
-static int qusb2_phy_init(struct phy *phy)
-{
-	struct qusb2_phy *qphy = phy_get_drvdata(phy);
-	unsigned int val;
-	unsigned int clk_scheme;
-	int ret;
-
-	dev_vdbg(&phy->dev, "%s(): Initializing QUSB2 phy\n", __func__);
-
 	/* enable ahb interface clock to program phy */
 	ret = clk_prepare_enable(qphy->cfg_ahb_clk);
 	if (ret) {
 		dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret);
-		return ret;
+		goto disable_iface_clk;
 	}
 
 	/* Perform phy reset */
@@ -344,6 +321,11 @@  static int qusb2_phy_init(struct phy *phy)
 	reset_control_assert(qphy->phy_reset);
 disable_ahb_clk:
 	clk_disable_unprepare(qphy->cfg_ahb_clk);
+disable_iface_clk:
+	clk_disable_unprepare(qphy->iface_clk);
+poweroff_phy:
+	regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
+
 	return ret;
 }
 
@@ -361,6 +343,9 @@  static int qusb2_phy_exit(struct phy *phy)
 	reset_control_assert(qphy->phy_reset);
 
 	clk_disable_unprepare(qphy->cfg_ahb_clk);
+	clk_disable_unprepare(qphy->iface_clk);
+
+	regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
 
 	return 0;
 }
@@ -368,8 +353,6 @@  static int qusb2_phy_exit(struct phy *phy)
 static const struct phy_ops qusb2_phy_gen_ops = {
 	.init		= qusb2_phy_init,
 	.exit		= qusb2_phy_exit,
-	.power_on	= qusb2_phy_poweron,
-	.power_off	= qusb2_phy_poweroff,
 	.owner		= THIS_MODULE,
 };