diff mbox

[v3,13/13] ARM: dts: ipq8074: Enable few peripherals for hk01 board

Message ID 1521518336-5467-14-git-send-email-sricharan@codeaurora.org (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Sricharan Ramabadhran March 20, 2018, 3:58 a.m. UTC
Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 103 ++++++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)

Comments

Stephen Boyd March 20, 2018, 7:35 a.m. UTC | #1
Quoting Sricharan R (2018-03-19 20:58:56)
> +                        };
> +               };
> +
> +               serial@78b1000 {
> +                        pinctrl-0 = <&hsuart_pins>;
> +                        pinctrl-names = "default";
> +                        status = "ok";
> +               };
> +
> +               i2c_0@78b6000 {

Node should just be called i2c?

> +                        pinctrl-0 = <&i2c_0_pins>;
> +                        pinctrl-names = "default";
> +                        status = "ok";
> +               };
> +
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Sricharan Ramabadhran March 20, 2018, 12:10 p.m. UTC | #2
On 2018-03-20 13:05, Stephen Boyd wrote:
> Quoting Sricharan R (2018-03-19 20:58:56)
>> +                        };
>> +               };
>> +
>> +               serial@78b1000 {
>> +                        pinctrl-0 = <&hsuart_pins>;
>> +                        pinctrl-names = "default";
>> +                        status = "ok";
>> +               };
>> +
>> +               i2c_0@78b6000 {
> 
> Node should just be called i2c?
> 
  ok, will fix

Regards,
  Sricharan
--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
index 6a838b5..8efc8f9e 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts
@@ -21,6 +21,7 @@ 
 
 	aliases {
 		serial0 = &blsp1_uart5;
+		serial1 = &serial_blsp2;
 	};
 
 	chosen {
@@ -41,6 +42,47 @@ 
 					bias-disable;
 				};
 			};
+
+			 i2c_0_pins: i2c_0_pinmux {
+				  mux {
+					   pins = "gpio42", "gpio43";
+					   function = "blsp1_i2c";
+					   drive-strength = <8>;
+					   bias-disable;
+				  };
+			 };
+
+			 spi_0_pins: spi_0_pins {
+				  mux {
+					   pins = "gpio38", "gpio39", "gpio40", "gpio41";
+					   function = "blsp0_spi";
+					   drive-strength = <8>;
+					   bias-disable;
+				  };
+			 };
+
+			 hsuart_pins: hsuart_pins {
+				  mux {
+					   pins = "gpio46", "gpio47", "gpio48", "gpio49";
+					   function = "blsp2_uart";
+					   drive-strength = <8>;
+					   bias-disable;
+				  };
+			 };
+
+			 qpic_pins: qpic_pins {
+				mux {
+					   pins = "gpio1", "gpio3", "gpio4",
+						  "gpio5", "gpio6", "gpio7",
+						  "gpio8", "gpio10", "gpio11",
+						  "gpio12", "gpio13", "gpio14",
+						  "gpio15", "gpio16", "gpio17";
+					   function = "qpic";
+					   drive-strength = <8>;
+					   bias-disable;
+				  };
+			};
+
 		};
 
 		serial@78b3000 {
@@ -48,5 +90,66 @@ 
 			pinctrl-names = "default";
 			status = "ok";
 		};
+
+		spi@78b5000 {
+			 pinctrl-0 = <&spi_0_pins>;
+			 pinctrl-names = "default";
+			 status = "ok";
+
+			 m25p80@0 {
+				  #address-cells = <1>;
+				  #size-cells = <1>;
+				  compatible = "n25q128a11", "jedec,spi-nor";
+				  reg = <0>;
+				  spi-max-frequency = <50000000>;
+			 };
+		};
+
+		serial@78b1000 {
+			 pinctrl-0 = <&hsuart_pins>;
+			 pinctrl-names = "default";
+			 status = "ok";
+		};
+
+		i2c_0@78b6000 {
+			 pinctrl-0 = <&i2c_0_pins>;
+			 pinctrl-names = "default";
+			 status = "ok";
+		};
+
+		dma@7984000 {
+			 status = "ok";
+		};
+
+		nand@79b0000 {
+			pinctrl-0 = <&qpic_pins>;
+			pinctrl-names = "default";
+			status = "ok";
+
+			nand@0 {
+				reg = <0>;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+				nand-bus-width = <8>;
+			};
+		};
+
+		phy@86000 {
+			status = "ok";
+		};
+
+		phy@8e000 {
+			status = "ok";
+		};
+
+		pci@20000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 58 0x1>;
+		};
+
+		pci@10000000 {
+			status = "ok";
+			perst-gpio = <&tlmm 61 0x1>;
+		};
 	};
 };