diff mbox series

arm64: dts: apq8016-sbc: Increase load on l11 for SDCARD

Message ID 1544785262-15821-1-git-send-email-loic.poulain@linaro.org
State New, archived
Headers show
Series arm64: dts: apq8016-sbc: Increase load on l11 for SDCARD | expand

Commit Message

Loic Poulain Dec. 14, 2018, 11:01 a.m. UTC
In the same way as for msm8974-hammerhead, l11 load, used for SDCARD
VMMC, needs to be increased in order to prevent any voltage drop issues
(due to limited current) happening with some SDCARDS or during specific
operations (e.g. write).

Tested on Dragonboard-410c and DART-SD410 boards.

Fixes: 4c7d53d16d77 (arm64: dts: apq8016-sbc: add regulators support)
Reported-by: Manabu Igusa <migusa@arrowjapan.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
---
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 4c3dda5..653344d 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -580,6 +580,8 @@ 
 	l11 {
 		regulator-min-microvolt = <1750000>;
 		regulator-max-microvolt = <3337000>;
+		regulator-allow-set-load;
+		regulator-system-load = <200000>;
 	};
 
 	l12 {