mbox series

[GIT,PULL] Qualcomm ARM64 DT updates for 5.3

Message ID 1561006911-28519-1-git-send-email-agross@kernel.org (mailing list archive)
State Not Applicable, archived
Headers show
Series [GIT,PULL] Qualcomm ARM64 DT updates for 5.3 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.3

Message

Andy Gross June 20, 2019, 5:01 a.m. UTC
The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:

  Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.3

for you to fetch changes up to 2410fd450c09a126aefefc9106b4652285b5d60f:

  arm64: dts: qcom: qcs404-evb: fix vdd_apc supply (2019-06-19 23:50:52 -0500)

----------------------------------------------------------------
Qualcomm ARM64 Updates for v5.3

* Switch to use second gen PON on PM8998
* Add PSCI cupidle states for MSM8996, MSM8998,and SDM845
* Add MSM8996 UFS phy reset controller
* Add propre cpu capacity scaling on MSM8996
* Fixups for APR domain, legacy clocks, and PSCI entry latency on MSM8996
* Enable SMMUs on MSM8996
* Add Dragonboard 845C
* Add Q6V5, GPU, GMU, and AOSS QMP node on SDM845
* Fixup CPU topology on SDM845
* Change USB1 to be peripheral on SDM845 MTP
* Add PCIe Phy, RC nodes, ANOC1 SMMU, and RPMPD node on MSM8998
* Update coresight bindings for MSM8916
* Update idle state names and entry-method on MSM8916
* Add PCIe, RPMPD, LPASS, Q6, TCSR, TuringCC, PSCI cpuidle states,
  and CDSP on QCS404
* Add reset-cells property to QCS404 GCC node
* Fixup s3 max voltage, l3 min voltage, drive strength typo, and
  s3 supply definition on QCS404-evb
* Fixup ADC outputs and VADC calibration on PMS405

----------------------------------------------------------------
Amit Kucheria (8):
      arm64: dts: sdm845: Fix up CPU topology
      arm64: dts: qcom: pms405: calibrate the VADC correctly
      arm64: dts: qcom: pms405: Rename adc outputs as per schematics
      arm64: dts: qcom: msm8916: Add entry-method property for the idle-states node
      arm64: dts: qcom: msm8916: Use more generic idle state names
      arm64: dts: qcom: msm8996: Add PSCI cpuidle low power states
      arm64: dts: msm8996: Add proper capacity scaling for the cpus
      arm64: dts: qcom: msm8998: Add PSCI cpuidle low power states

Andy Gross (1):
      arm64: dts: qcom-qcs404: Add reset-cells to GCC node

Bjorn Andersson (14):
      arm64: dts: qcom: sdm845-mtp: Make USB1 peripheral
      arm64: dts: qcom: qcs404: Add turingcc node
      arm64: dts: qcom: qcs404-evb: Mark CDSP clocks protected
      arm64: dts: qcom: qcs404: Add TCSR node
      arm64: dts: qcom: qcs404: Fully describe the CDSP
      arm64: dts: qcom: qcs404: Move lpass and q6 into soc
      arm64: dts: qcom: qcs404: Add rpmpd node
      arm64: dts: qcom: Add AOSS QMP node
      arm64: dts: qcom: msm8996: Stop using legacy clock names
      arm64: dts: qcom: qcs404: Add PCIe related nodes
      arm64: dts: qcom: qcs404-evb: Enable PCIe
      arm64: dts: qcom: Add Dragonboard 845c
      arm64: dts: qcom: msm8996: Correct apr-domain property
      arm64: dts: qcom: msm8996: Enable SMMUs

Evan Green (1):
      arm64: dts: msm8996: Add UFS PHY reset controller

John Stultz (1):
      arm64: dts: qcom: pm8998: Use qcom,pm8998-pon binding for second gen pon

Jordan Crouse (2):
      arm64: dts: sdm845: Add gpu and gmu device nodes
      arm64: dts: sdm845: Add zap shader region for GPU

Jorge Ramirez-Ortiz (1):
      arm64: dts: qcom: qcs404-evb: fix vdd_apc supply

Leo Yan (1):
      arm64: dts: qcom-msm8916: Update coresight DT bindings

Marc Gonzalez (2):
      arm64: dts: qcom: msm8998: Add ANOC1 SMMU node
      arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes

Niklas Cassel (4):
      arm64: dts: qcom: qcs404-evb: fix l3 min voltage
      arm64: dts: qcom: qcs404-evb: increase s3 max voltage
      arm64: dts: qcom: qcs404: Add PSCI cpuidle low power states
      arm64: dts: msm8996: fix PSCI entry-latency-us

Raju P.L.S.S.S.N (1):
      arm64: dts: qcom: sdm845: Add PSCI cpuidle low power states

Sibi Sankar (2):
      arm64: dts: qcom: msm8998: Add rpmpd node
      arm64: dts: qcom: sdm845: Add Q6V5 MSS node

Vinod Koul (1):
      arm64: dts: qcom: qcs404-evb: Fix typo

 arch/arm64/boot/dts/qcom/Makefile          |   1 +
 arch/arm64/boot/dts/qcom/msm8916.dtsi      |  17 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi      |  59 +--
 arch/arm64/boot/dts/qcom/msm8998.dtsi      | 185 ++++++++++
 arch/arm64/boot/dts/qcom/pm8998.dtsi       |   2 +-
 arch/arm64/boot/dts/qcom/pms405.dtsi       |  20 +-
 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi   |  43 ++-
 arch/arm64/boot/dts/qcom/qcs404.dtsi       | 364 ++++++++++++++-----
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 557 +++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sdm845-mtp.dts    |   4 +-
 arch/arm64/boot/dts/qcom/sdm845.dtsi       | 283 ++++++++++++++-
 11 files changed, 1393 insertions(+), 142 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm845-db845c.dts

Comments

Olof Johansson June 25, 2019, 11:31 a.m. UTC | #1
On Thu, Jun 20, 2019 at 12:01:48AM -0500, Andy Gross wrote:
> The following changes since commit a188339ca5a396acc588e5851ed7e19f66b0ebd9:
> 
>   Linux 5.2-rc1 (2019-05-19 15:47:09 -0700)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.3
> 
> for you to fetch changes up to 2410fd450c09a126aefefc9106b4652285b5d60f:
> 
>   arm64: dts: qcom: qcs404-evb: fix vdd_apc supply (2019-06-19 23:50:52 -0500)
> 
> ----------------------------------------------------------------
> Qualcomm ARM64 Updates for v5.3
> 
> * Switch to use second gen PON on PM8998
> * Add PSCI cupidle states for MSM8996, MSM8998,and SDM845
> * Add MSM8996 UFS phy reset controller
> * Add propre cpu capacity scaling on MSM8996
> * Fixups for APR domain, legacy clocks, and PSCI entry latency on MSM8996
> * Enable SMMUs on MSM8996
> * Add Dragonboard 845C
> * Add Q6V5, GPU, GMU, and AOSS QMP node on SDM845
> * Fixup CPU topology on SDM845
> * Change USB1 to be peripheral on SDM845 MTP
> * Add PCIe Phy, RC nodes, ANOC1 SMMU, and RPMPD node on MSM8998
> * Update coresight bindings for MSM8916
> * Update idle state names and entry-method on MSM8916
> * Add PCIe, RPMPD, LPASS, Q6, TCSR, TuringCC, PSCI cpuidle states,
>   and CDSP on QCS404
> * Add reset-cells property to QCS404 GCC node
> * Fixup s3 max voltage, l3 min voltage, drive strength typo, and
>   s3 supply definition on QCS404-evb
> * Fixup ADC outputs and VADC calibration on PMS405

Merged, thanks!


-Olof