| Message ID | 1568634061-14455-4-git-send-email-cchiluve@codeaurora.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ADD interconnect support for USB | expand |
Hi Chandana. On Mon, Sep 16, 2019 at 05:11:01PM +0530, Chandana Kishori Chiluveru wrote: > Populate USB DT node with interconnect properties. nit: nodes > Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/sdm845.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi > index fcb9330..1c41922 100644 > --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi > +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi > @@ -1837,6 +1837,12 @@ > > resets = <&gcc GCC_USB30_PRIM_BCR>; > > + interconnects = <&rsc_hlos MASTER_USB3_0 > + &rsc_hlos SLAVE_EBI1>, nit: align second line after '<' for better readability (like 'interrupts' or 'clocks' properties): interconnects = <&rsc_hlos MASTER_USB3_0 &rsc_hlos SLAVE_EBI1>, same for the other entries. > + <&rsc_hlos MASTER_APPSS_PROC > + &rsc_hlos SLAVE_USB3_0>; > + interconnect-names = "usb-ddr", "apps-usb"; > + > usb_1_dwc3: dwc3@a600000 { > compatible = "snps,dwc3"; > reg = <0 0x0a600000 0 0xcd00>; > @@ -1881,6 +1887,12 @@ > > resets = <&gcc GCC_USB30_SEC_BCR>; > > + interconnects = <&rsc_hlos MASTER_USB3_1 > + &rsc_hlos SLAVE_EBI1>, > + <&rsc_hlos MASTER_APPSS_PROC > + &rsc_hlos SLAVE_USB3_1>; > + interconnect-names = "usb-ddr", "apps-usb"; > + > usb_2_dwc3: dwc3@a800000 { > compatible = "snps,dwc3"; > reg = <0 0x0a800000 0 0xcd00>; Besides the nits: Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index fcb9330..1c41922 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1837,6 +1837,12 @@ resets = <&gcc GCC_USB30_PRIM_BCR>; + interconnects = <&rsc_hlos MASTER_USB3_0 + &rsc_hlos SLAVE_EBI1>, + <&rsc_hlos MASTER_APPSS_PROC + &rsc_hlos SLAVE_USB3_0>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_1_dwc3: dwc3@a600000 { compatible = "snps,dwc3"; reg = <0 0x0a600000 0 0xcd00>; @@ -1881,6 +1887,12 @@ resets = <&gcc GCC_USB30_SEC_BCR>; + interconnects = <&rsc_hlos MASTER_USB3_1 + &rsc_hlos SLAVE_EBI1>, + <&rsc_hlos MASTER_APPSS_PROC + &rsc_hlos SLAVE_USB3_1>; + interconnect-names = "usb-ddr", "apps-usb"; + usb_2_dwc3: dwc3@a800000 { compatible = "snps,dwc3"; reg = <0 0x0a800000 0 0xcd00>;
Populate USB DT node with interconnect properties. Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org> --- arch/arm64/boot/dts/qcom/sdm845.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)