diff mbox series

[3/4] drm/msm/dsi: Remove set but not used variable 'lpx'

Message ID 1570690506-83287-4-git-send-email-zhengbin13@huawei.com (mailing list archive)
State New, archived
Headers show
Series drm/msm: Remove four set but not used variables | expand

Commit Message

Zheng Bin Oct. 10, 2019, 6:55 a.m. UTC 
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/msm/dsi/phy/dsi_phy.c: In function msm_dsi_dphy_timing_calc_v2:
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:156:17: warning: variable lpx set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c: In function msm_dsi_dphy_timing_calc_v3:
drivers/gpu/drm/msm/dsi/phy/dsi_phy.c:273:17: warning: variable lpx set but not used [-Wunused-but-set-variable]

'lpx' in msm_dsi_dphy_timing_calc_v2 is not used since commit a4df68fa232e
("drm/msm/dsi: Add new method to calculate 14nm PHY timings")

'lpx' in msm_dsi_dphy_timing_calc_v3 is not used since commit f1fa7ff44056
("drm/msm/dsi: implement auto PHY timing calculator for 10nm PHY")

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: zhengbin <zhengbin13@huawei.com>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--
2.7.4
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
index 3522863..aa22c3a 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c
@@ -145,7 +145,7 @@  int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,
 {
 	const unsigned long bit_rate = clk_req->bitclk_rate;
 	const unsigned long esc_rate = clk_req->escclk_rate;
-	s32 ui, ui_x8, lpx;
+	s32 ui, ui_x8;
 	s32 tmax, tmin;
 	s32 pcnt0 = 50;
 	s32 pcnt1 = 50;
@@ -175,7 +175,6 @@  int msm_dsi_dphy_timing_calc_v2(struct msm_dsi_dphy_timing *timing,

 	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
 	ui_x8 = ui << 3;
-	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);

 	temp = S_DIV_ROUND_UP(38 * coeff - val_ckln * ui, ui_x8);
 	tmin = max_t(s32, temp, 0);
@@ -262,7 +261,7 @@  int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,
 {
 	const unsigned long bit_rate = clk_req->bitclk_rate;
 	const unsigned long esc_rate = clk_req->escclk_rate;
-	s32 ui, ui_x8, lpx;
+	s32 ui, ui_x8;
 	s32 tmax, tmin;
 	s32 pcnt0 = 50;
 	s32 pcnt1 = 50;
@@ -284,7 +283,6 @@  int msm_dsi_dphy_timing_calc_v3(struct msm_dsi_dphy_timing *timing,

 	ui = mult_frac(NSEC_PER_MSEC, coeff, bit_rate / 1000);
 	ui_x8 = ui << 3;
-	lpx = mult_frac(NSEC_PER_MSEC, coeff, esc_rate / 1000);

 	temp = S_DIV_ROUND_UP(38 * coeff, ui_x8);
 	tmin = max_t(s32, temp, 0);