mbox series

[GIT,PULL] Qualcomm ARM64 DT updates for 5.5

Message ID 1573068840-13098-2-git-send-email-agross@kernel.org (mailing list archive)
State Accepted
Commit 1d16a9172c385e304fe4c2467d52e7f2ac301c6b
Headers show
Series [GIT,PULL] Qualcomm ARM64 DT updates for 5.5 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.5

Message

Andy Gross Nov. 6, 2019, 7:33 p.m. UTC
Arnd, Olof, and Kevin,

I have one slight faux paux in this pull request.  A drivers: soc change got
into my arm64 DTS branch and while it is innocuous, it wasn't easy to fix
without messing up a lot of people who depend on the SHAs not changing.  So I'm
sorry for this inclusion.  I'll scrub this better next time.

Andy


The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:

  Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-5.5

for you to fetch changes up to 915603b106164f966ebc027de96e54011885bdf4:

  arm64: dts: qcom: db845c: Enable LVS 1 and 2 (2019-11-03 20:49:00 -0800)

----------------------------------------------------------------
Qualcomm ARM64 Updates for v5.5

* Add thermal IRQ support on MSM8916, SDM845, MSM8996, and QCS404
* Fix thermal HW ids for cpus on MSM8916
* Add blsp1 UART3 and  blsp1 BAM on MSM8998
* Add volume buttons and WCNSS for Wifi and BT on MSM8916 LongCheer-l8150
* Fixup load on l21 for SD on apq8096-db820c
* Enable LVS1/2, APSS watchdog, and select UFS reset gpio for SDM845
* Disable coresight by default on MSM8998
* Enable bluetooth and remove retention idle state on MSM8998-clamshell
* Enable adsp, cdsp, and mpss on C630
* Enable bluetooth on MSM8998-mtp
* Delete zap shader on SDM845-cheza
* Add tactile buttons and hall sensor on MSM8916-Samsung-A2015
* Add Interconnect nodes, watchdog, and sleep clk on QCS404
* Override Iris compatible on MSM8916-Samsung-A5U
* Enable WCNSS Wifi and bluetooth on MSM8916-Samsung-A2015
* Fixup cooling states for the aoss warming devices

----------------------------------------------------------------
Amit Kucheria (5):
      arm64: dts: qcs404: thermal: Add interrupt support
      arm64: dts: msm8998: thermal: Add interrupt support
      arm64: dts: msm8996: thermal: Add interrupt support
      arm64: dts: sdm845: thermal: Add interrupt support
      arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors

Bjorn Andersson (3):
      arm64: dts: qcom: c630: Enable adsp, cdsp and mpss
      arm64: dts: qcom: sdm845: Add APSS watchdog node
      arm64: dts: qcom: db845c: Enable LVS 1 and 2

Georgi Djakov (1):
      arm64: dts: qcs404: Add interconnect provider DT nodes

Jeffrey Hugo (5):
      arm64: dts: qcom: msm8998: Add blsp1 BAM
      arm64: dts: qcom: msm8998: Add blsp1_uart3
      arm64: dts: qcom: msm8998-mtp: Enable bluetooth
      arm64: dts: qcom: msm8998-clamshell: Enable bluetooth
      arm64: dts: qcom: msm8998-clamshell: Remove retention idle state

Jorge Ramirez-Ortiz (2):
      arm64: dts: qcom: qcs404: add sleep clk fixed rate oscillator
      arm64: dts: qcom: qcs404: add the watchdog node

Loic Poulain (1):
      arm64: dts: apq8096-db820c: Increase load on l21 for SDCARD

Michael Srba (1):
      arm64: dts: msm8916-samsung-a2015: add tactile buttons and hall sensor

Nikita Travkin (2):
      arm64: dts: msm8916-longcheer-l8150: Enable WCNSS for WiFi and BT
      arm64: dts: msm8916-longcheer-l8150: Add Volume buttons

Rob Clark (1):
      arm64: dts: qcom: sdm845-cheza: delete zap-shader

Sai Prakash Ranjan (1):
      arm64: dts: qcom: msm8998: Disable coresight by default

Stephan Gerhold (2):
      arm64: dts: msm8916-samsung-a2015: Enable WCNSS for WiFi and BT
      arm64: dts: msm8916-samsung-a5u: Override iris compatible

Stephen Boyd (1):
      arm64: dts: qcom: sdm845: Use UFS reset gpio instead of pinctrl

Thara Gopinath (1):
      soc: qcom: Invert the cooling states for the aoss warming devices

 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi       |  2 +
 .../boot/dts/qcom/msm8916-longcheer-l8150.dts      | 55 ++++++++++++++
 .../dts/qcom/msm8916-samsung-a2015-common.dtsi     | 80 +++++++++++++++++++++
 .../boot/dts/qcom/msm8916-samsung-a5u-eur.dts      |  6 ++
 arch/arm64/boot/dts/qcom/msm8916.dtsi              |  4 +-
 arch/arm64/boot/dts/qcom/msm8996.dtsi              |  4 ++
 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi    | 54 ++++++++++++++
 arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi          | 82 +++++++++++++++++++++
 arch/arm64/boot/dts/qcom/msm8998-pins.dtsi         | 13 ++++
 arch/arm64/boot/dts/qcom/msm8998.dtsi              | 84 +++++++++++++++++-----
 arch/arm64/boot/dts/qcom/qcs404.dtsi               | 41 +++++++++++
 arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi         | 53 ++------------
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts         | 12 ++++
 arch/arm64/boot/dts/qcom/sdm845.dtsi               | 12 +++-
 .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts      | 14 ++++
 drivers/soc/qcom/qcom_aoss.c                       |  8 +--
 16 files changed, 449 insertions(+), 75 deletions(-)

Comments

Amit Kucheria Nov. 7, 2019, 2:06 p.m. UTC | #1
(Removing arm-soc)

Hi Andy,

On Thu, Nov 7, 2019 at 1:04 AM Andy Gross <agross@kernel.org> wrote:
>
> Arnd, Olof, and Kevin,
>
> I have one slight faux paux in this pull request.  A drivers: soc change got
> into my arm64 DTS branch and while it is innocuous, it wasn't easy to fix
> without messing up a lot of people who depend on the SHAs not changing.  So I'm
> sorry for this inclusion.  I'll scrub this better next time.
>
> Andy

> ----------------------------------------------------------------
> Amit Kucheria (5):
>       arm64: dts: qcs404: thermal: Add interrupt support
>       arm64: dts: msm8998: thermal: Add interrupt support
>       arm64: dts: msm8996: thermal: Add interrupt support
>       arm64: dts: sdm845: thermal: Add interrupt support
>       arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors

One of my patches to add interrupt support to msm8916 tsens is missing
here. Specifically this one:
https://patchwork.kernel.org/patch/11201853/

Will there be a second PR this cycle?

Regards,
Amit
Andy Gross Nov. 8, 2019, 3:18 a.m. UTC | #2
On Thu, Nov 07, 2019 at 07:36:03PM +0530, Amit Kucheria wrote:
> (Removing arm-soc)
> 
> Hi Andy,
> 
> On Thu, Nov 7, 2019 at 1:04 AM Andy Gross <agross@kernel.org> wrote:
> >
> > Arnd, Olof, and Kevin,
> >
> > I have one slight faux paux in this pull request.  A drivers: soc change got
> > into my arm64 DTS branch and while it is innocuous, it wasn't easy to fix
> > without messing up a lot of people who depend on the SHAs not changing.  So I'm
> > sorry for this inclusion.  I'll scrub this better next time.
> >
> > Andy
> 
> > ----------------------------------------------------------------
> > Amit Kucheria (5):
> >       arm64: dts: qcs404: thermal: Add interrupt support
> >       arm64: dts: msm8998: thermal: Add interrupt support
> >       arm64: dts: msm8996: thermal: Add interrupt support
> >       arm64: dts: sdm845: thermal: Add interrupt support
> >       arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
> 
> One of my patches to add interrupt support to msm8916 tsens is missing
> here. Specifically this one:
> https://patchwork.kernel.org/patch/11201853/
> 
> Will there be a second PR this cycle?

I can work up another and throw it on top.


Andy
Stephan Gerhold Dec. 10, 2019, 10:57 a.m. UTC | #3
On Thu, Nov 07, 2019 at 09:18:54PM -0600, Andy Gross wrote:
> On Thu, Nov 07, 2019 at 07:36:03PM +0530, Amit Kucheria wrote:
> > (Removing arm-soc)
> > 
> > Hi Andy,
> > 
> > On Thu, Nov 7, 2019 at 1:04 AM Andy Gross <agross@kernel.org> wrote:
> > >
> > > Arnd, Olof, and Kevin,
> > >
> > > I have one slight faux paux in this pull request.  A drivers: soc change got
> > > into my arm64 DTS branch and while it is innocuous, it wasn't easy to fix
> > > without messing up a lot of people who depend on the SHAs not changing.  So I'm
> > > sorry for this inclusion.  I'll scrub this better next time.
> > >
> > > Andy
> > 
> > > ----------------------------------------------------------------
> > > Amit Kucheria (5):
> > >       arm64: dts: qcs404: thermal: Add interrupt support
> > >       arm64: dts: msm8998: thermal: Add interrupt support
> > >       arm64: dts: msm8996: thermal: Add interrupt support
> > >       arm64: dts: sdm845: thermal: Add interrupt support
> > >       arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
> > 
> > One of my patches to add interrupt support to msm8916 tsens is missing
> > here. Specifically this one:
> > https://patchwork.kernel.org/patch/11201853/
> > 
> > Will there be a second PR this cycle?
> 
> I can work up another and throw it on top.
> 

FYI, the patch seems to be still missing in 5.5-rc1.
tsens now fails to probe on MSM8916 with:

  qcom-tsens 4a9000.thermal-sensor: IRQ uplow not found

Can you queue up the patch as fix for 5.5?

Thanks,
Stephan
Amit Kucheria Dec. 10, 2019, 5:36 p.m. UTC | #4
On Tue, Dec 10, 2019 at 4:27 PM Stephan Gerhold <stephan@gerhold.net> wrote:
>
> On Thu, Nov 07, 2019 at 09:18:54PM -0600, Andy Gross wrote:
> > On Thu, Nov 07, 2019 at 07:36:03PM +0530, Amit Kucheria wrote:
> > > (Removing arm-soc)
> > >
> > > Hi Andy,
> > >
> > > On Thu, Nov 7, 2019 at 1:04 AM Andy Gross <agross@kernel.org> wrote:
> > > >
> > > > Arnd, Olof, and Kevin,
> > > >
> > > > I have one slight faux paux in this pull request.  A drivers: soc change got
> > > > into my arm64 DTS branch and while it is innocuous, it wasn't easy to fix
> > > > without messing up a lot of people who depend on the SHAs not changing.  So I'm
> > > > sorry for this inclusion.  I'll scrub this better next time.
> > > >
> > > > Andy
> > >
> > > > ----------------------------------------------------------------
> > > > Amit Kucheria (5):
> > > >       arm64: dts: qcs404: thermal: Add interrupt support
> > > >       arm64: dts: msm8998: thermal: Add interrupt support
> > > >       arm64: dts: msm8996: thermal: Add interrupt support
> > > >       arm64: dts: sdm845: thermal: Add interrupt support
> > > >       arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
> > >
> > > One of my patches to add interrupt support to msm8916 tsens is missing
> > > here. Specifically this one:
> > > https://patchwork.kernel.org/patch/11201853/
> > >
> > > Will there be a second PR this cycle?
> >
> > I can work up another and throw it on top.
> >
>
> FYI, the patch seems to be still missing in 5.5-rc1.
> tsens now fails to probe on MSM8916 with:
>
>   qcom-tsens 4a9000.thermal-sensor: IRQ uplow not found
>
> Can you queue up the patch as fix for 5.5?

Indeed. Andy/Bjorn, let me know if you need anything from me to get
this into -rc2.

Regards,
Amit
Bjorn Andersson Dec. 10, 2019, 6:17 p.m. UTC | #5
On Tue 10 Dec 09:36 PST 2019, Amit Kucheria wrote:

> On Tue, Dec 10, 2019 at 4:27 PM Stephan Gerhold <stephan@gerhold.net> wrote:
> >
> > On Thu, Nov 07, 2019 at 09:18:54PM -0600, Andy Gross wrote:
> > > On Thu, Nov 07, 2019 at 07:36:03PM +0530, Amit Kucheria wrote:
> > > > (Removing arm-soc)
> > > >
> > > > Hi Andy,
> > > >
> > > > On Thu, Nov 7, 2019 at 1:04 AM Andy Gross <agross@kernel.org> wrote:
> > > > >
> > > > > Arnd, Olof, and Kevin,
> > > > >
> > > > > I have one slight faux paux in this pull request.  A drivers: soc change got
> > > > > into my arm64 DTS branch and while it is innocuous, it wasn't easy to fix
> > > > > without messing up a lot of people who depend on the SHAs not changing.  So I'm
> > > > > sorry for this inclusion.  I'll scrub this better next time.
> > > > >
> > > > > Andy
> > > >
> > > > > ----------------------------------------------------------------
> > > > > Amit Kucheria (5):
> > > > >       arm64: dts: qcs404: thermal: Add interrupt support
> > > > >       arm64: dts: msm8998: thermal: Add interrupt support
> > > > >       arm64: dts: msm8996: thermal: Add interrupt support
> > > > >       arm64: dts: sdm845: thermal: Add interrupt support
> > > > >       arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
> > > >
> > > > One of my patches to add interrupt support to msm8916 tsens is missing
> > > > here. Specifically this one:
> > > > https://patchwork.kernel.org/patch/11201853/
> > > >
> > > > Will there be a second PR this cycle?
> > >
> > > I can work up another and throw it on top.
> > >
> >
> > FYI, the patch seems to be still missing in 5.5-rc1.
> > tsens now fails to probe on MSM8916 with:
> >
> >   qcom-tsens 4a9000.thermal-sensor: IRQ uplow not found
> >
> > Can you queue up the patch as fix for 5.5?
> 
> Indeed. Andy/Bjorn, let me know if you need anything from me to get
> this into -rc2.
> 

I'm pulling in some fixes for a rc-pull, so I could add it there.

But why are we breaking backwards compatibility with existing dtbs to
add a new (optional) feature? Shouldn't there be a rc-fix in the driver
for this regression?

Regards,
Bjorn
Olof Johansson Dec. 10, 2019, 9 p.m. UTC | #6
On Tue, Dec 10, 2019 at 10:17 AM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Tue 10 Dec 09:36 PST 2019, Amit Kucheria wrote:
>
> > On Tue, Dec 10, 2019 at 4:27 PM Stephan Gerhold <stephan@gerhold.net> wrote:
> > >
> > > On Thu, Nov 07, 2019 at 09:18:54PM -0600, Andy Gross wrote:
> > > > On Thu, Nov 07, 2019 at 07:36:03PM +0530, Amit Kucheria wrote:
> > > > > (Removing arm-soc)
> > > > >
> > > > > Hi Andy,
> > > > >
> > > > > On Thu, Nov 7, 2019 at 1:04 AM Andy Gross <agross@kernel.org> wrote:
> > > > > >
> > > > > > Arnd, Olof, and Kevin,
> > > > > >
> > > > > > I have one slight faux paux in this pull request.  A drivers: soc change got
> > > > > > into my arm64 DTS branch and while it is innocuous, it wasn't easy to fix
> > > > > > without messing up a lot of people who depend on the SHAs not changing.  So I'm
> > > > > > sorry for this inclusion.  I'll scrub this better next time.
> > > > > >
> > > > > > Andy
> > > > >
> > > > > > ----------------------------------------------------------------
> > > > > > Amit Kucheria (5):
> > > > > >       arm64: dts: qcs404: thermal: Add interrupt support
> > > > > >       arm64: dts: msm8998: thermal: Add interrupt support
> > > > > >       arm64: dts: msm8996: thermal: Add interrupt support
> > > > > >       arm64: dts: sdm845: thermal: Add interrupt support
> > > > > >       arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
> > > > >
> > > > > One of my patches to add interrupt support to msm8916 tsens is missing
> > > > > here. Specifically this one:
> > > > > https://patchwork.kernel.org/patch/11201853/
> > > > >
> > > > > Will there be a second PR this cycle?
> > > >
> > > > I can work up another and throw it on top.
> > > >
> > >
> > > FYI, the patch seems to be still missing in 5.5-rc1.
> > > tsens now fails to probe on MSM8916 with:
> > >
> > >   qcom-tsens 4a9000.thermal-sensor: IRQ uplow not found
> > >
> > > Can you queue up the patch as fix for 5.5?
> >
> > Indeed. Andy/Bjorn, let me know if you need anything from me to get
> > this into -rc2.
> >
>
> I'm pulling in some fixes for a rc-pull, so I could add it there.
>
> But why are we breaking backwards compatibility with existing dtbs to
> add a new (optional) feature? Shouldn't there be a rc-fix in the driver
> for this regression?

100% agreed.

Driver shouldn't require the DT update to continue to function. It
needs to fill in the previous behavior as default.

As a matter of fact, based on that I don't want to see that DT patch
as a fix, please queue it up for 5.6 instead.


-Olof
Bjorn Andersson Dec. 11, 2019, 6:26 a.m. UTC | #7
On Tue 10 Dec 13:00 PST 2019, Olof Johansson wrote:

> On Tue, Dec 10, 2019 at 10:17 AM Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> >
> > On Tue 10 Dec 09:36 PST 2019, Amit Kucheria wrote:
> >
> > > On Tue, Dec 10, 2019 at 4:27 PM Stephan Gerhold <stephan@gerhold.net> wrote:
> > > >
> > > > On Thu, Nov 07, 2019 at 09:18:54PM -0600, Andy Gross wrote:
> > > > > On Thu, Nov 07, 2019 at 07:36:03PM +0530, Amit Kucheria wrote:
> > > > > > (Removing arm-soc)
> > > > > >
> > > > > > Hi Andy,
> > > > > >
> > > > > > On Thu, Nov 7, 2019 at 1:04 AM Andy Gross <agross@kernel.org> wrote:
> > > > > > >
> > > > > > > Arnd, Olof, and Kevin,
> > > > > > >
> > > > > > > I have one slight faux paux in this pull request.  A drivers: soc change got
> > > > > > > into my arm64 DTS branch and while it is innocuous, it wasn't easy to fix
> > > > > > > without messing up a lot of people who depend on the SHAs not changing.  So I'm
> > > > > > > sorry for this inclusion.  I'll scrub this better next time.
> > > > > > >
> > > > > > > Andy
> > > > > >
> > > > > > > ----------------------------------------------------------------
> > > > > > > Amit Kucheria (5):
> > > > > > >       arm64: dts: qcs404: thermal: Add interrupt support
> > > > > > >       arm64: dts: msm8998: thermal: Add interrupt support
> > > > > > >       arm64: dts: msm8996: thermal: Add interrupt support
> > > > > > >       arm64: dts: sdm845: thermal: Add interrupt support
> > > > > > >       arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
> > > > > >
> > > > > > One of my patches to add interrupt support to msm8916 tsens is missing
> > > > > > here. Specifically this one:
> > > > > > https://patchwork.kernel.org/patch/11201853/
> > > > > >
> > > > > > Will there be a second PR this cycle?
> > > > >
> > > > > I can work up another and throw it on top.
> > > > >
> > > >
> > > > FYI, the patch seems to be still missing in 5.5-rc1.
> > > > tsens now fails to probe on MSM8916 with:
> > > >
> > > >   qcom-tsens 4a9000.thermal-sensor: IRQ uplow not found
> > > >
> > > > Can you queue up the patch as fix for 5.5?
> > >
> > > Indeed. Andy/Bjorn, let me know if you need anything from me to get
> > > this into -rc2.
> > >
> >
> > I'm pulling in some fixes for a rc-pull, so I could add it there.
> >
> > But why are we breaking backwards compatibility with existing dtbs to
> > add a new (optional) feature? Shouldn't there be a rc-fix in the driver
> > for this regression?
> 
> 100% agreed.
> 
> Driver shouldn't require the DT update to continue to function. It
> needs to fill in the previous behavior as default.
> 
> As a matter of fact, based on that I don't want to see that DT patch
> as a fix, please queue it up for 5.6 instead.
> 

I've picked the patch for 5.6

Thanks,
Bjorn
Amit Kucheria Dec. 11, 2019, 10 a.m. UTC | #8
On Wed, Dec 11, 2019 at 2:31 AM Olof Johansson <olof@lixom.net> wrote:
>
> On Tue, Dec 10, 2019 at 10:17 AM Bjorn Andersson
> <bjorn.andersson@linaro.org> wrote:
> >
> > On Tue 10 Dec 09:36 PST 2019, Amit Kucheria wrote:
> >
> > > On Tue, Dec 10, 2019 at 4:27 PM Stephan Gerhold <stephan@gerhold.net> wrote:
> > > >
> > > > On Thu, Nov 07, 2019 at 09:18:54PM -0600, Andy Gross wrote:
> > > > > On Thu, Nov 07, 2019 at 07:36:03PM +0530, Amit Kucheria wrote:
> > > > > > (Removing arm-soc)
> > > > > >
> > > > > > Hi Andy,
> > > > > >
> > > > > > On Thu, Nov 7, 2019 at 1:04 AM Andy Gross <agross@kernel.org> wrote:
> > > > > > >
> > > > > > > Arnd, Olof, and Kevin,
> > > > > > >
> > > > > > > I have one slight faux paux in this pull request.  A drivers: soc change got
> > > > > > > into my arm64 DTS branch and while it is innocuous, it wasn't easy to fix
> > > > > > > without messing up a lot of people who depend on the SHAs not changing.  So I'm
> > > > > > > sorry for this inclusion.  I'll scrub this better next time.
> > > > > > >
> > > > > > > Andy
> > > > > >
> > > > > > > ----------------------------------------------------------------
> > > > > > > Amit Kucheria (5):
> > > > > > >       arm64: dts: qcs404: thermal: Add interrupt support
> > > > > > >       arm64: dts: msm8998: thermal: Add interrupt support
> > > > > > >       arm64: dts: msm8996: thermal: Add interrupt support
> > > > > > >       arm64: dts: sdm845: thermal: Add interrupt support
> > > > > > >       arm64: dts: msm8916: thermal: Fixup HW ids for cpu sensors
> > > > > >
> > > > > > One of my patches to add interrupt support to msm8916 tsens is missing
> > > > > > here. Specifically this one:
> > > > > > https://patchwork.kernel.org/patch/11201853/
> > > > > >
> > > > > > Will there be a second PR this cycle?
> > > > >
> > > > > I can work up another and throw it on top.
> > > > >
> > > >
> > > > FYI, the patch seems to be still missing in 5.5-rc1.
> > > > tsens now fails to probe on MSM8916 with:
> > > >
> > > >   qcom-tsens 4a9000.thermal-sensor: IRQ uplow not found
> > > >
> > > > Can you queue up the patch as fix for 5.5?
> > >
> > > Indeed. Andy/Bjorn, let me know if you need anything from me to get
> > > this into -rc2.
> > >
> >
> > I'm pulling in some fixes for a rc-pull, so I could add it there.
> >
> > But why are we breaking backwards compatibility with existing dtbs to
> > add a new (optional) feature? Shouldn't there be a rc-fix in the driver
> > for this regression?
>
> 100% agreed.
>
> Driver shouldn't require the DT update to continue to function. It
> needs to fill in the previous behavior as default.
>
> As a matter of fact, based on that I don't want to see that DT patch
> as a fix, please queue it up for 5.6 instead.

I've posted a fix for -rc2 to allow the driver to continue to work
with old DTBs. Please consider for -rc2.

Regards,
Amit