diff mbox series

[V2,3/3] arm64: dts: sc7180: Add interconnect provider DT nodes

Message ID 1577782737-32068-4-git-send-email-okukatla@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Add SC7180 interconnect provider driver | expand

Commit Message

Odelu Kukatla Dec. 31, 2019, 8:58 a.m. UTC 
Add the DT nodes for the network-on-chip interconnect buses found
on sc7180-based platforms.
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 96 ++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)

Comments

Georgi Djakov Jan. 6, 2020, 5:29 p.m. UTC | #1 
On 31.12.19 г. 10:58 ч., Odelu Kukatla wrote:
> Add the DT nodes for the network-on-chip interconnect buses found
> on sc7180-based platforms.
> ---
>   arch/arm64/boot/dts/qcom/sc7180.dtsi | 96 ++++++++++++++++++++++++++++++++++++
>   1 file changed, 96 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 3676bfd..077b1e5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -8,6 +8,7 @@
>   #include <dt-bindings/clock/qcom,gcc-sc7180.h>
>   #include <dt-bindings/clock/qcom,rpmh.h>
>   #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interconnect/qcom,sc7180.h>

This should be moved one line up if we want to keep the headers sorted.

>   #include <dt-bindings/phy/phy-qcom-qusb2.h>
>   #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>   
> @@ -1286,6 +1287,10 @@
>   				clock-names = "xo";
>   				#clock-cells = <1>;
>   			};
> +
> +			apps_bcm_voter: bcm_voter {
> +				compatible = "qcom,sc7180-bcm-voter";
> +			};
>   		};
>   
>   		cpufreq_hw: cpufreq@18323000 {
> @@ -1298,6 +1303,97 @@
>   
>   			#freq-domain-cells = <1>;
>   		};
> + > +		config_noc: interconnect@1500000 {

All DT nodes in this file are ordered by their address. Please move these up
to keep it consistent.

Thanks,
Georgi
Evan Green Feb. 4, 2020, 8:52 p.m. UTC | #2 
On Tue, Dec 31, 2019 at 1:00 AM Odelu Kukatla <okukatla@codeaurora.org> wrote:
>
> Add the DT nodes for the network-on-chip interconnect buses found
> on sc7180-based platforms.
> ---

Hi Odelu,
Are you going to spin this series?
-Evan
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3676bfd..077b1e5 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -8,6 +8,7 @@ 
 #include <dt-bindings/clock/qcom,gcc-sc7180.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
@@ -1286,6 +1287,10 @@ 
 				clock-names = "xo";
 				#clock-cells = <1>;
 			};
+
+			apps_bcm_voter: bcm_voter {
+				compatible = "qcom,sc7180-bcm-voter";
+			};
 		};
 
 		cpufreq_hw: cpufreq@18323000 {
@@ -1298,6 +1303,97 @@ 
 
 			#freq-domain-cells = <1>;
 		};
+
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sc7180-config-noc";
+			reg = <0 0x01500000 0 0x28000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sc7180-system-noc";
+			reg = <0 0x01620000 0 0x17080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@1630000 {
+			compatible = "qcom,sc7180-mc-virt";
+			reg = <0 0x01630000 0 0x4000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qup_virt: interconnect@1650000 {
+			compatible = "qcom,sc7180-qup-virt";
+			reg = <0 0x01650000 0 0x4000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc7180-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1700000 {
+			compatible = "qcom,sc7180-aggre2-noc";
+			reg = <0 0x01700000 0 0x1f880>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@170e000 {
+			compatible = "qcom,sc7180-compute-noc";
+			reg = <0 0x0170e000 0 0x11880>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sc7180-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ipa_virt: interconnect@1e00000 {
+			compatible = "qcom,sc7180-ipa-virt";
+			reg = <0 0x01e00000 0 0x4000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sc7180-dc-noc";
+			reg = <0 0x09160000 0 0x03200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sc7180-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sc7180-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		camnoc_virt: interconnect@ac00000 {
+			compatible = "qcom,sc7180-camnoc-virt";
+			reg = <0 0x0ac00000 0 0x4000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
 	};
 
 	thermal-zones {