diff mbox series

[v5] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node

Message ID 1580281223-2759-1-git-send-email-pillair@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series [v5] arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node | expand

Commit Message

Rakesh Pillai Jan. 29, 2020, 7 a.m. UTC
Add device node for the ath10k SNOC platform driver probe
and add resources required for WCN3990 on sc7180 soc.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180-idp.dts |  5 +++++
 arch/arm64/boot/dts/qcom/sc7180.dtsi    | 28 ++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)

Comments

Bjorn Andersson Feb. 3, 2020, 5:35 p.m. UTC | #1
On Tue 28 Jan 23:00 PST 2020, Rakesh Pillai wrote:

> Add device node for the ath10k SNOC platform driver probe
> and add resources required for WCN3990 on sc7180 soc.
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180-idp.dts |  5 +++++
>  arch/arm64/boot/dts/qcom/sc7180.dtsi    | 28 ++++++++++++++++++++++++++++
>  2 files changed, 33 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> index 388f50a..167f68ac 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> @@ -287,6 +287,11 @@
>  	vdda-pll-supply = <&vreg_l4a_0p8>;
>  };
>  
> +&wifi {
> +	status = "okay";
> +	qcom,msa-fixed-perm;
> +};
> +
>  /* PINCTRL - additions to nodes defined in sc7180.dtsi */
>  
>  &qspi_clk {
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 8011c5f..0a00c94 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -75,6 +75,12 @@
>  			reg = <0x0 0x80900000 0x0 0x200000>;
>  			no-map;
>  		};
> +
> +		wlan_fw_mem: memory@93900000 {
> +			compatible = "removed-dma-pool";

Sorry for not spotting this earlier, the "removed-dma-pool" compatible
is a downstream thing and isn't defined upstream.

> +                     no-map;
> +                     reg = <0 0x93900000 0 0x200000>;

If you swap the order of no-map and reg in this node it will look like
all the others.


Apart from that the patch looks good.

Regards,
Bjorn

> +		};
>  	};
>  
>  	cpus {
> @@ -1490,6 +1496,28 @@
>  
>  			#freq-domain-cells = <1>;
>  		};
> +
> +		wifi: wifi@18800000 {
> +			compatible = "qcom,wcn3990-wifi";
> +			reg = <0 0x18800000 0 0x800000>;
> +			reg-names = "membase";
> +			iommus = <&apps_smmu 0xc0 0x1>;
> +			interrupts =
> +				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
> +				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
> +				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
> +				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
> +				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
> +				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
> +				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
> +				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
> +				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
> +				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
> +				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
> +				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
> +			memory-region = <&wlan_fw_mem>;
> +			status = "disabled";
> +		};
>  	};
>  
>  	thermal-zones {
> -- 
> 2.7.4
>
Rakesh Pillai Feb. 4, 2020, 4:37 p.m. UTC | #2
Hi Bjorn,
I have addressed your comments and sent out the v6 for this patch.

Thanks,
Rakesh Pillai.

> -----Original Message-----
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> Sent: Monday, February 3, 2020 11:05 PM
> To: Rakesh Pillai <pillair@codeaurora.org>
> Cc: devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
linux-
> kernel@vger.kernel.org; linux-arm-msm@vger.kernel.org
> Subject: Re: [PATCH v5] arm64: dts: qcom: sc7180: Add WCN3990 WLAN
> module device node
> 
> On Tue 28 Jan 23:00 PST 2020, Rakesh Pillai wrote:
> 
> > Add device node for the ath10k SNOC platform driver probe
> > and add resources required for WCN3990 on sc7180 soc.
> >
> > Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sc7180-idp.dts |  5 +++++
> >  arch/arm64/boot/dts/qcom/sc7180.dtsi    | 28
> ++++++++++++++++++++++++++++
> >  2 files changed, 33 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > index 388f50a..167f68ac 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > +++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
> > @@ -287,6 +287,11 @@
> >  	vdda-pll-supply = <&vreg_l4a_0p8>;
> >  };
> >
> > +&wifi {
> > +	status = "okay";
> > +	qcom,msa-fixed-perm;
> > +};
> > +
> >  /* PINCTRL - additions to nodes defined in sc7180.dtsi */
> >
> >  &qspi_clk {
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > index 8011c5f..0a00c94 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> > @@ -75,6 +75,12 @@
> >  			reg = <0x0 0x80900000 0x0 0x200000>;
> >  			no-map;
> >  		};
> > +
> > +		wlan_fw_mem: memory@93900000 {
> > +			compatible = "removed-dma-pool";
> 
> Sorry for not spotting this earlier, the "removed-dma-pool" compatible
> is a downstream thing and isn't defined upstream.
> 
> > +                     no-map;
> > +                     reg = <0 0x93900000 0 0x200000>;
> 
> If you swap the order of no-map and reg in this node it will look like
> all the others.
> 
> 
> Apart from that the patch looks good.
> 
> Regards,
> Bjorn
> 
> > +		};
> >  	};
> >
> >  	cpus {
> > @@ -1490,6 +1496,28 @@
> >
> >  			#freq-domain-cells = <1>;
> >  		};
> > +
> > +		wifi: wifi@18800000 {
> > +			compatible = "qcom,wcn3990-wifi";
> > +			reg = <0 0x18800000 0 0x800000>;
> > +			reg-names = "membase";
> > +			iommus = <&apps_smmu 0xc0 0x1>;
> > +			interrupts =
> > +				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0
> */ >,
> > +				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1
> */ >,
> > +				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2
> */ >,
> > +				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3
> */ >,
> > +				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4
> */ >,
> > +				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5
> */ >,
> > +				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6
> */ >,
> > +				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7
> */ >,
> > +				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8
> */ >,
> > +				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9
> */ >,
> > +				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10
> */>,
> > +				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11
> */>;
> > +			memory-region = <&wlan_fw_mem>;
> > +			status = "disabled";
> > +		};
> >  	};
> >
> >  	thermal-zones {
> > --
> > 2.7.4
> >
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 388f50a..167f68ac 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -287,6 +287,11 @@ 
 	vdda-pll-supply = <&vreg_l4a_0p8>;
 };
 
+&wifi {
+	status = "okay";
+	qcom,msa-fixed-perm;
+};
+
 /* PINCTRL - additions to nodes defined in sc7180.dtsi */
 
 &qspi_clk {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 8011c5f..0a00c94 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -75,6 +75,12 @@ 
 			reg = <0x0 0x80900000 0x0 0x200000>;
 			no-map;
 		};
+
+		wlan_fw_mem: memory@93900000 {
+			compatible = "removed-dma-pool";
+			no-map;
+			reg = <0 0x93900000 0 0x200000>;
+		};
 	};
 
 	cpus {
@@ -1490,6 +1496,28 @@ 
 
 			#freq-domain-cells = <1>;
 		};
+
+		wifi: wifi@18800000 {
+			compatible = "qcom,wcn3990-wifi";
+			reg = <0 0x18800000 0 0x800000>;
+			reg-names = "membase";
+			iommus = <&apps_smmu 0xc0 0x1>;
+			interrupts =
+				<GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH /* CE0 */ >,
+				<GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH /* CE1 */ >,
+				<GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH /* CE2 */ >,
+				<GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH /* CE3 */ >,
+				<GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH /* CE4 */ >,
+				<GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH /* CE5 */ >,
+				<GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH /* CE6 */ >,
+				<GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH /* CE7 */ >,
+				<GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH /* CE8 */ >,
+				<GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH /* CE9 */ >,
+				<GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH /* CE10 */>,
+				<GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH /* CE11 */>;
+			memory-region = <&wlan_fw_mem>;
+			status = "disabled";
+		};
 	};
 
 	thermal-zones {