| Message ID | 1580305919-30946-4-git-send-email-sanm@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add QUSB2 PHY support for SC7180 | expand |
On Wed, Jan 29, 2020 at 07:21:54PM +0530, Sandeep Maheswaram wrote: > Add generic QUSB2 V2 PHY table so the respective phys > can use the same table. > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > --- > drivers/phy/qualcomm/phy-qcom-qusb2.c | 18 +++++++++--------- > 1 file changed, 9 insertions(+), 9 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c > index bf94a52..70c9da6 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c > +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c > @@ -1,6 +1,6 @@ > // SPDX-License-Identifier: GPL-2.0 > /* > - * Copyright (c) 2017, The Linux Foundation. All rights reserved. > + * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved. > */ > > #include <linux/clk.h> > @@ -177,7 +177,7 @@ static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = { > QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19), > }; > > -static const unsigned int sdm845_regs_layout[] = { > +static const unsigned int qusb2_v2_regs_layout[] = { > [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8, > [QUSB2PHY_PLL_STATUS] = 0x1a0, > [QUSB2PHY_PORT_TUNE1] = 0x240, > @@ -191,7 +191,7 @@ static const unsigned int sdm845_regs_layout[] = { > [QUSB2PHY_INTR_CTRL] = 0x230, > }; > > -static const struct qusb2_phy_init_tbl sdm845_init_tbl[] = { > +static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = { > QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03), > QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c), > QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80), > @@ -258,10 +258,10 @@ static const struct qusb2_phy_cfg msm8998_phy_cfg = { > .update_tune1_with_efuse = true, > }; > > -static const struct qusb2_phy_cfg sdm845_phy_cfg = { > - .tbl = sdm845_init_tbl, > - .tbl_num = ARRAY_SIZE(sdm845_init_tbl), > - .regs = sdm845_regs_layout, > +static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = { > + .tbl = qusb2_v2_init_tbl, > + .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl), > + .regs = qusb2_v2_regs_layout, > > .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN | > POWER_DOWN), > @@ -774,8 +774,8 @@ static const struct of_device_id qusb2_phy_of_match_table[] = { > .compatible = "qcom,msm8998-qusb2-phy", > .data = &msm8998_phy_cfg, > }, { > - .compatible = "qcom,sdm845-qusb2-phy", > - .data = &sdm845_phy_cfg, > + .compatible = "qcom,qusb2-v2-phy", > + .data = &qusb2_v2_phy_cfg, > }, > { }, > }; Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Quoting Sandeep Maheswaram (2020-01-29 05:51:54) > Add generic QUSB2 V2 PHY table so the respective phys > can use the same table. > > Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> > --- Reviewed-by: Stephen Boyd <swboyd@chromium.org>
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index bf94a52..70c9da6 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0 /* - * Copyright (c) 2017, The Linux Foundation. All rights reserved. + * Copyright (c) 2017, 2019, The Linux Foundation. All rights reserved. */ #include <linux/clk.h> @@ -177,7 +177,7 @@ static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = { QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19), }; -static const unsigned int sdm845_regs_layout[] = { +static const unsigned int qusb2_v2_regs_layout[] = { [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8, [QUSB2PHY_PLL_STATUS] = 0x1a0, [QUSB2PHY_PORT_TUNE1] = 0x240, @@ -191,7 +191,7 @@ static const unsigned int sdm845_regs_layout[] = { [QUSB2PHY_INTR_CTRL] = 0x230, }; -static const struct qusb2_phy_init_tbl sdm845_init_tbl[] = { +static const struct qusb2_phy_init_tbl qusb2_v2_init_tbl[] = { QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x03), QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c), QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80), @@ -258,10 +258,10 @@ static const struct qusb2_phy_cfg msm8998_phy_cfg = { .update_tune1_with_efuse = true, }; -static const struct qusb2_phy_cfg sdm845_phy_cfg = { - .tbl = sdm845_init_tbl, - .tbl_num = ARRAY_SIZE(sdm845_init_tbl), - .regs = sdm845_regs_layout, +static const struct qusb2_phy_cfg qusb2_v2_phy_cfg = { + .tbl = qusb2_v2_init_tbl, + .tbl_num = ARRAY_SIZE(qusb2_v2_init_tbl), + .regs = qusb2_v2_regs_layout, .disable_ctrl = (PWR_CTRL1_VREF_SUPPLY_TRIM | PWR_CTRL1_CLAMP_N_EN | POWER_DOWN), @@ -774,8 +774,8 @@ static const struct of_device_id qusb2_phy_of_match_table[] = { .compatible = "qcom,msm8998-qusb2-phy", .data = &msm8998_phy_cfg, }, { - .compatible = "qcom,sdm845-qusb2-phy", - .data = &sdm845_phy_cfg, + .compatible = "qcom,qusb2-v2-phy", + .data = &qusb2_v2_phy_cfg, }, { }, };
Add generic QUSB2 V2 PHY table so the respective phys can use the same table. Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org> --- drivers/phy/qualcomm/phy-qcom-qusb2.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)