diff mbox series

[v3,2/3] dt-bindings: i2c: Add binding for Qualcomm CCI I2C controller

Message ID 1583340776-27865-2-git-send-email-loic.poulain@linaro.org (mailing list archive)
State Superseded
Headers show
Series [v3,1/3] i2c: Add Qualcomm CCI I2C driver | expand

Commit Message

Loic Poulain March 4, 2020, 4:52 p.m. UTC
From: Todor Tomov <todor.tomov@linaro.org>

Add DT binding document for Qualcomm Camera Control Interface (CCI)
I2C controller.

Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 v2: Fix subnode properties, remove mandatory clock names
 v3: Add sdm845 compatible string

 .../devicetree/bindings/i2c/i2c-qcom-cci.txt       | 92 ++++++++++++++++++++++
 1 file changed, 92 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt

Comments

Robert Foss March 4, 2020, 7:05 p.m. UTC | #1
Signed-off-by: Robert Foss <robert.foss@linaro.org>

On Wed, 4 Mar 2020 at 17:49, Loic Poulain <loic.poulain@linaro.org> wrote:
>
> From: Todor Tomov <todor.tomov@linaro.org>
>
> Add DT binding document for Qualcomm Camera Control Interface (CCI)
> I2C controller.
>
> Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
> Signed-off-by: Vinod Koul <vkoul@kernel.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>  v2: Fix subnode properties, remove mandatory clock names
>  v3: Add sdm845 compatible string
>
>  .../devicetree/bindings/i2c/i2c-qcom-cci.txt       | 92 ++++++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
>
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
> new file mode 100644
> index 0000000..c6668b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
> @@ -0,0 +1,92 @@
> +Qualcomm Camera Control Interface (CCI) I2C controller
> +
> +PROPERTIES:
> +
> +- compatible:
> +       Usage: required
> +       Value type: <string>
> +       Definition: must be one of:
> +               "qcom,msm8916-cci"
> +               "qcom,msm8996-cci"
> +               "qcom,sdm845-cci"
> +
> +- reg
> +       Usage: required
> +       Value type: <prop-encoded-array>
> +       Definition: base address CCI I2C controller and length of memory
> +                   mapped region.
> +
> +- interrupts:
> +       Usage: required
> +       Value type: <prop-encoded-array>
> +       Definition: specifies the CCI I2C interrupt. The format of the
> +                   specifier is defined by the binding document describing
> +                   the node's interrupt parent.
> +
> +- clocks:
> +       Usage: required
> +       Value type: <prop-encoded-array>
> +       Definition: a list of phandle, should contain an entry for each
> +                   entries in clock-names.
> +
> +- clock-names
> +       Usage: required
> +       Value type: <string>
> +       Definition: a list of clock names, must include "cci" clock.
> +
> +- power-domains
> +       Usage: required for "qcom,msm8996-cci"
> +       Value type: <prop-encoded-array>
> +       Definition:
> +
> +SUBNODES:
> +
> +The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996 and
> +sdm845), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
> +
> +PROPERTIES:
> +
> +- reg:
> +       Usage: required
> +       Value type: <u32>
> +       Definition: Index of the CCI bus/master
> +
> +- clock-frequency:
> +       Usage: optional
> +       Value type: <u32>
> +       Definition: Desired I2C bus clock frequency in Hz, defaults to 100
> +                   kHz if omitted.
> +
> +Example:
> +
> +       cci@a0c000 {
> +               compatible = "qcom,msm8996-cci";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               reg = <0xa0c000 0x1000>;
> +               interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
> +               clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
> +                        <&mmcc CAMSS_TOP_AHB_CLK>,
> +                        <&mmcc CAMSS_CCI_AHB_CLK>,
> +                        <&mmcc CAMSS_CCI_CLK>,
> +                        <&mmcc CAMSS_AHB_CLK>;
> +               clock-names = "mmss_mmagic_ahb",
> +                             "camss_top_ahb",
> +                             "cci_ahb",
> +                             "cci",
> +                             "camss_ahb";
> +
> +               i2c-bus@0 {
> +                       reg = <0>;
> +                       clock-frequency = <400000>;
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +
> +               i2c-bus@1 {
> +                       reg = <1>;
> +                       clock-frequency = <400000>;
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +       };
> --
> 2.7.4
>
Robert Foss March 4, 2020, 7:44 p.m. UTC | #2
Let me revise that, feel free to add by r-b.

Reviewed-by: Robert Foss <robert.foss@linaro.org>

On Wed, 4 Mar 2020 at 20:05, Robert Foss <robert.foss@linaro.org> wrote:
>
> Signed-off-by: Robert Foss <robert.foss@linaro.org>
>
> On Wed, 4 Mar 2020 at 17:49, Loic Poulain <loic.poulain@linaro.org> wrote:
> >
> > From: Todor Tomov <todor.tomov@linaro.org>
> >
> > Add DT binding document for Qualcomm Camera Control Interface (CCI)
> > I2C controller.
> >
> > Signed-off-by: Todor Tomov <todor.tomov@linaro.org>
> > Signed-off-by: Vinod Koul <vkoul@kernel.org>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > ---
> >  v2: Fix subnode properties, remove mandatory clock names
> >  v3: Add sdm845 compatible string
> >
> >  .../devicetree/bindings/i2c/i2c-qcom-cci.txt       | 92 ++++++++++++++++++++++
> >  1 file changed, 92 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
> >
> > diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
> > new file mode 100644
> > index 0000000..c6668b7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
> > @@ -0,0 +1,92 @@
> > +Qualcomm Camera Control Interface (CCI) I2C controller
> > +
> > +PROPERTIES:
> > +
> > +- compatible:
> > +       Usage: required
> > +       Value type: <string>
> > +       Definition: must be one of:
> > +               "qcom,msm8916-cci"
> > +               "qcom,msm8996-cci"
> > +               "qcom,sdm845-cci"
> > +
> > +- reg
> > +       Usage: required
> > +       Value type: <prop-encoded-array>
> > +       Definition: base address CCI I2C controller and length of memory
> > +                   mapped region.
> > +
> > +- interrupts:
> > +       Usage: required
> > +       Value type: <prop-encoded-array>
> > +       Definition: specifies the CCI I2C interrupt. The format of the
> > +                   specifier is defined by the binding document describing
> > +                   the node's interrupt parent.
> > +
> > +- clocks:
> > +       Usage: required
> > +       Value type: <prop-encoded-array>
> > +       Definition: a list of phandle, should contain an entry for each
> > +                   entries in clock-names.
> > +
> > +- clock-names
> > +       Usage: required
> > +       Value type: <string>
> > +       Definition: a list of clock names, must include "cci" clock.
> > +
> > +- power-domains
> > +       Usage: required for "qcom,msm8996-cci"
> > +       Value type: <prop-encoded-array>
> > +       Definition:
> > +
> > +SUBNODES:
> > +
> > +The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996 and
> > +sdm845), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
> > +
> > +PROPERTIES:
> > +
> > +- reg:
> > +       Usage: required
> > +       Value type: <u32>
> > +       Definition: Index of the CCI bus/master
> > +
> > +- clock-frequency:
> > +       Usage: optional
> > +       Value type: <u32>
> > +       Definition: Desired I2C bus clock frequency in Hz, defaults to 100
> > +                   kHz if omitted.
> > +
> > +Example:
> > +
> > +       cci@a0c000 {
> > +               compatible = "qcom,msm8996-cci";
> > +               #address-cells = <1>;
> > +               #size-cells = <0>;
> > +               reg = <0xa0c000 0x1000>;
> > +               interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
> > +               clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
> > +                        <&mmcc CAMSS_TOP_AHB_CLK>,
> > +                        <&mmcc CAMSS_CCI_AHB_CLK>,
> > +                        <&mmcc CAMSS_CCI_CLK>,
> > +                        <&mmcc CAMSS_AHB_CLK>;
> > +               clock-names = "mmss_mmagic_ahb",
> > +                             "camss_top_ahb",
> > +                             "cci_ahb",
> > +                             "cci",
> > +                             "camss_ahb";
> > +
> > +               i2c-bus@0 {
> > +                       reg = <0>;
> > +                       clock-frequency = <400000>;
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +               };
> > +
> > +               i2c-bus@1 {
> > +                       reg = <1>;
> > +                       clock-frequency = <400000>;
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +               };
> > +       };
> > --
> > 2.7.4
> >
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
new file mode 100644
index 0000000..c6668b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-qcom-cci.txt
@@ -0,0 +1,92 @@ 
+Qualcomm Camera Control Interface (CCI) I2C controller
+
+PROPERTIES:
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be one of:
+		"qcom,msm8916-cci"
+		"qcom,msm8996-cci"
+		"qcom,sdm845-cci"
+
+- reg
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: base address CCI I2C controller and length of memory
+		    mapped region.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: specifies the CCI I2C interrupt. The format of the
+		    specifier is defined by the binding document describing
+		    the node's interrupt parent.
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: a list of phandle, should contain an entry for each
+		    entries in clock-names.
+
+- clock-names
+	Usage: required
+	Value type: <string>
+	Definition: a list of clock names, must include "cci" clock.
+
+- power-domains
+	Usage: required for "qcom,msm8996-cci"
+	Value type: <prop-encoded-array>
+	Definition:
+
+SUBNODES:
+
+The CCI provides I2C masters for one (msm8916) or two i2c busses (msm8996 and
+sdm845), described as subdevices named "i2c-bus@0" and "i2c-bus@1".
+
+PROPERTIES:
+
+- reg:
+	Usage: required
+	Value type: <u32>
+	Definition: Index of the CCI bus/master
+
+- clock-frequency:
+	Usage: optional
+	Value type: <u32>
+	Definition: Desired I2C bus clock frequency in Hz, defaults to 100
+		    kHz if omitted.
+
+Example:
+
+	cci@a0c000 {
+		compatible = "qcom,msm8996-cci";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0xa0c000 0x1000>;
+		interrupts = <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>;
+		clocks = <&mmcc MMSS_MMAGIC_AHB_CLK>,
+			 <&mmcc CAMSS_TOP_AHB_CLK>,
+			 <&mmcc CAMSS_CCI_AHB_CLK>,
+			 <&mmcc CAMSS_CCI_CLK>,
+			 <&mmcc CAMSS_AHB_CLK>;
+		clock-names = "mmss_mmagic_ahb",
+			      "camss_top_ahb",
+			      "cci_ahb",
+			      "cci",
+			      "camss_ahb";
+
+		i2c-bus@0 {
+			reg = <0>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c-bus@1 {
+			reg = <1>;
+			clock-frequency = <400000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};