diff mbox series

[v12,3/4] soc: qcom: rpmh: Invoke rpmh_flush() for dirty caches

Message ID 1583428023-19559-4-git-send-email-mkshah@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Invoke rpmh_flush for non OSI targets | expand

Commit Message

Maulik Shah March 5, 2020, 5:07 p.m. UTC 
Add changes to invoke rpmh flush() from within cache_lock when the data
in cache is dirty.

This is done only if OSI is not supported in PSCI. If OSI is supported
rpmh_flush can get invoked when the last cpu going to power collapse
deepest low power mode.

Also remove "depends on COMPILE_TEST" for Kconfig option QCOM_RPMH so the
driver is only compiled for arm64 which supports psci_has_osi_support()
API.

Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Srinivas Rao L <lsrao@codeaurora.org>
---
 drivers/soc/qcom/Kconfig |  2 +-
 drivers/soc/qcom/rpmh.c  | 49 ++++++++++++++++++++++++------------------------
 2 files changed, 26 insertions(+), 25 deletions(-)
diff mbox series

Patch

diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index d0a73e7..2e581bc 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -105,7 +105,7 @@  config QCOM_RMTFS_MEM
 
 config QCOM_RPMH
 	bool "Qualcomm RPM-Hardened (RPMH) Communication"
-	depends on ARCH_QCOM && ARM64 || COMPILE_TEST
+	depends on ARCH_QCOM && ARM64
 	help
 	  Support for communication with the hardened-RPM blocks in
 	  Qualcomm Technologies Inc (QTI) SoCs. RPMH communication uses an
diff --git a/drivers/soc/qcom/rpmh.c b/drivers/soc/qcom/rpmh.c
index 03630ae..1951f6a 100644
--- a/drivers/soc/qcom/rpmh.c
+++ b/drivers/soc/qcom/rpmh.c
@@ -12,6 +12,7 @@ 
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/psci.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/types.h>
@@ -113,13 +114,14 @@  static struct cache_req *__find_req(struct rpmh_ctrlr *ctrlr, u32 addr)
 	return req;
 }
 
-static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
+static int cache_rpm_request(struct rpmh_ctrlr *ctrlr,
 					   enum rpmh_state state,
 					   struct tcs_cmd *cmd)
 {
 	struct cache_req *req;
 	unsigned long flags;
 	u32 old_sleep_val, old_wake_val;
+	int ret = 0;
 
 	spin_lock_irqsave(&ctrlr->cache_lock, flags);
 	req = __find_req(ctrlr, cmd->addr);
@@ -155,10 +157,13 @@  static struct cache_req *cache_rpm_request(struct rpmh_ctrlr *ctrlr,
 			req->sleep_val != UINT_MAX &&
 			req->wake_val != UINT_MAX;
 
+	if (ctrlr->dirty && !psci_has_osi_support())
+		ret = rpmh_flush(ctrlr);
+
 unlock:
 	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 
-	return req;
+	return ret;
 }
 
 /**
@@ -176,17 +181,16 @@  static int __rpmh_write(const struct device *dev, enum rpmh_state state,
 			struct rpmh_request *rpm_msg)
 {
 	struct rpmh_ctrlr *ctrlr = get_rpmh_ctrlr(dev);
-	int ret = -EINVAL;
-	struct cache_req *req;
+	int ret;
 	int i;
 
 	rpm_msg->msg.state = state;
 
 	/* Cache the request in our store and link the payload */
 	for (i = 0; i < rpm_msg->msg.num_cmds; i++) {
-		req = cache_rpm_request(ctrlr, state, &rpm_msg->msg.cmds[i]);
-		if (IS_ERR(req))
-			return PTR_ERR(req);
+		ret = cache_rpm_request(ctrlr, state, &rpm_msg->msg.cmds[i]);
+		if (ret)
+			return ret;
 	}
 
 	rpm_msg->msg.state = state;
@@ -283,26 +287,32 @@  int rpmh_write(const struct device *dev, enum rpmh_state state,
 }
 EXPORT_SYMBOL(rpmh_write);
 
-static void cache_batch(struct rpmh_ctrlr *ctrlr, struct batch_cache_req *req)
+static int cache_batch(struct rpmh_ctrlr *ctrlr, struct batch_cache_req *req)
 {
 	unsigned long flags;
+	int ret = 0;
 
 	spin_lock_irqsave(&ctrlr->cache_lock, flags);
+
 	list_add_tail(&req->list, &ctrlr->batch_cache);
 	ctrlr->dirty = true;
+
+	if (!psci_has_osi_support())
+		ret = rpmh_flush(ctrlr);
+
 	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
+
+	return ret;
 }
 
 static int flush_batch(struct rpmh_ctrlr *ctrlr)
 {
 	struct batch_cache_req *req;
 	const struct rpmh_request *rpm_msg;
-	unsigned long flags;
 	int ret = 0;
 	int i;
 
 	/* Send Sleep/Wake requests to the controller, expect no response */
-	spin_lock_irqsave(&ctrlr->cache_lock, flags);
 	list_for_each_entry(req, &ctrlr->batch_cache, list) {
 		for (i = 0; i < req->count; i++) {
 			rpm_msg = req->rpm_msgs + i;
@@ -312,7 +322,6 @@  static int flush_batch(struct rpmh_ctrlr *ctrlr)
 				break;
 		}
 	}
-	spin_unlock_irqrestore(&ctrlr->cache_lock, flags);
 
 	return ret;
 }
@@ -384,10 +393,8 @@  int rpmh_write_batch(const struct device *dev, enum rpmh_state state,
 		cmd += n[i];
 	}
 
-	if (state != RPMH_ACTIVE_ONLY_STATE) {
-		cache_batch(ctrlr, req);
-		return 0;
-	}
+	if (state != RPMH_ACTIVE_ONLY_STATE)
+		return cache_batch(ctrlr, req);
 
 	for (i = 0; i < count; i++) {
 		struct completion *compl = &compls[i];
@@ -450,12 +457,10 @@  static int send_single(struct rpmh_ctrlr *ctrlr, enum rpmh_state state,
  *
  * @ctrlr: controller making request to flush cached data
  *
- * Return: -EBUSY if the controller is busy, probably waiting on a response
- * to a RPMH request sent earlier.
+ * Return: 0 on success, error number otherwise.
  *
- * This function is always called from the sleep code from the last CPU
- * that is powering down the entire system. Since no other RPMH API would be
- * executing at this time, it is safe to run lockless.
+ * This function can either be called from sleep code on the last CPU
+ * (thus no spinlock needed) or with the ctrlr->cache_lock already held.
  */
 int rpmh_flush(struct rpmh_ctrlr *ctrlr)
 {
@@ -472,10 +477,6 @@  int rpmh_flush(struct rpmh_ctrlr *ctrlr)
 	if (ret)
 		return ret;
 
-	/*
-	 * Nobody else should be calling this function other than system PM,
-	 * hence we can run without locks.
-	 */
 	list_for_each_entry(p, &ctrlr->cache, list) {
 		if (!is_req_valid(p)) {
 			pr_debug("%s: skipping RPMH req: a:%#x s:%#x w:%#x",