From patchwork Sat Mar 14 00:54:51 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Wesley Cheng X-Patchwork-Id: 11438157 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B21A66CA for ; Sat, 14 Mar 2020 00:55:06 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 7F4B32074F for ; Sat, 14 Mar 2020 00:55:06 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mg.codeaurora.org header.i=@mg.codeaurora.org header.b="mJ6G8Uvt" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727749AbgCNAzF (ORCPT ); Fri, 13 Mar 2020 20:55:05 -0400 Received: from mail27.static.mailgun.info ([104.130.122.27]:18329 "EHLO mail27.static.mailgun.info" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726637AbgCNAzF (ORCPT ); Fri, 13 Mar 2020 20:55:05 -0400 DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1584147304; h=References: In-Reply-To: Message-Id: Date: Subject: Cc: To: From: Sender; bh=nALwPpErI0tmpPl/u2qgJ2QyUPPUBMZvO++osQxPMNI=; b=mJ6G8UvtOVsWUAeYGPZ//9tDmFRViZCVxAZcM8zcVHUHlDWYEMy/7jY7Fvwgigve2LKI+rMU UWz23+I9YArMFamNbUm1fcYtrR/l7ojFYSRUmuUKv+Asx2HBVEmBeE1D3e02BxbX8Eswqwn5 aQln8CYqAStwB7XUsOld1Lm2sTo= X-Mailgun-Sending-Ip: 104.130.122.27 X-Mailgun-Sid: WyI1MzIzYiIsICJsaW51eC1hcm0tbXNtQHZnZXIua2VybmVsLm9yZyIsICJiZTllNGEiXQ== Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by mxa.mailgun.org with ESMTP id 5e6c2b68.7f142f6f0030-smtp-out-n01; Sat, 14 Mar 2020 00:55:04 -0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 1001) id A38C9C44792; Sat, 14 Mar 2020 00:55:02 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-caf-mail-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.0 required=2.0 tests=ALL_TRUSTED,SPF_NONE, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from wcheng-linux.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: wcheng) by smtp.codeaurora.org (Postfix) with ESMTPSA id 795B4C43636; Sat, 14 Mar 2020 00:55:00 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 795B4C43636 Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=none smtp.mailfrom=wcheng@codeaurora.org From: Wesley Cheng To: agross@kernel.org, bjorn.andersson@linaro.org, kishon@ti.com, robh+dt@kernel.org, mark.rutland@arm.com, p.zabel@pengutronix.de Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Wesley Cheng Subject: [PATCH 2/4] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs Date: Fri, 13 Mar 2020 17:54:51 -0700 Message-Id: <1584147293-6763-3-git-send-email-wcheng@codeaurora.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1584147293-6763-1-git-send-email-wcheng@codeaurora.org> References: <1584147293-6763-1-git-send-email-wcheng@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org This adds the SNPS FemtoPHY driver used in QCOM SOCs. There are potentially multiple instances of this UTMI PHY on the SOC, all which can utilize this driver. Signed-off-by: Wesley Cheng --- drivers/phy/qualcomm/Kconfig | 10 ++ drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-snps-7nm.c | 294 +++++++++++++++++++++++++++++++ 3 files changed, 305 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-snps-7nm.c diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index e46824d..3158c14 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -85,6 +85,16 @@ config PHY_QCOM_USB_HS Support for the USB high-speed ULPI compliant phy on Qualcomm chipsets. +config PHY_QCOM_USB_SNPS_HS_7NM + tristate "Qualcomm 7nm USB HS PHY module" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS phy on Qualcomm 7nm + chipsets. This PHY has differences in the register map compared + to the 28nm variant. The PHY is paired with a Synopsys DWC3 USB + controller on MSM SOCs. + config PHY_QCOM_USB_HSIC tristate "Qualcomm USB HSIC ULPI PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 283251d..06bdb40 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o +obj-$(CONFIG_PHY_QCOM_USB_SNPS_HS_7NM) += phy-qcom-snps-7nm.o diff --git a/drivers/phy/qualcomm/phy-qcom-snps-7nm.c b/drivers/phy/qualcomm/phy-qcom-snps-7nm.c new file mode 100644 index 0000000..8d4ba53 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-snps-7nm.c @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB2_PHY_USB_PHY_UTMI_CTRL0 (0x3c) +#define OPMODE_MASK GENMASK(4, 3) +#define OPMODE_NORMAL (0x00) +#define OPMODE_NONDRIVING BIT(3) +#define SLEEPM BIT(0) +#define TERMSEL BIT(5) + +#define USB2_PHY_USB_PHY_UTMI_CTRL1 (0x40) +#define XCVRSEL BIT(0) + +#define USB2_PHY_USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define RETENABLEN BIT(3) +#define FSEL_MASK GENMASK(7, 5) +#define FSEL_DEFAULT (0x3 << 4) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1 (0x58) +#define VBUSVLDEXTSEL0 BIT(4) +#define PLLBTUNE BIT(5) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2 (0x5c) +#define VREGBYPASS BIT(0) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL1 (0x60) +#define VBUSVLDEXT0 BIT(0) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL2 (0x64) +#define USB2_AUTO_RESUME BIT(0) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) + +#define USB2_PHY_USB_PHY_CFG0 (0x94) +#define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0) +#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1) + +#define USB2_PHY_USB_PHY_REFCLK_CTRL (0xa0) +#define REFCLK_SEL_MASK GENMASK(1, 0) +#define REFCLK_SEL_DEFAULT (0x2 << 0) + +static const char * const qcom_snps_hsphy_vreg_names[] = { + "vdda-pll", "vdda33", "vdda18", +}; + +#define SNPS_HS_NUM_VREGS ARRAY_SIZE(qcom_snps_hsphy_vreg_names) + +/** + * struct qcom_snps_hsphy - structure holding snps hs phy attributes + * + * @phy: generic phy + * @base: iomapped memory space for qubs2 phy + * + * @cfg_ahb_clk: AHB2PHY interface clock + * @ref_clk: phy reference clock + * @iface_clk: phy interface clock + * @phy_reset: phy reset control + * @vregs: regulator supplies bulk data + + * @phy_initialized: if PHY has been initialized correctly + * + */ +struct qcom_snps_hsphy { + struct phy *phy; + void __iomem *base; + + struct clk *cfg_ahb_clk; + struct clk *ref_clk; + struct reset_control *phy_reset; + struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS]; + + bool phy_initialized; +}; + +static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset, + u32 mask, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~mask; + reg |= val & mask; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + +static int qcom_snps_hsphy_init(struct phy *phy) +{ + struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); + int ret; + + dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__); + + /* turn on regulator supplies */ + ret = regulator_bulk_enable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); + if (ret) + return ret; + + /* enable ahb interface clock to program phy */ + ret = clk_prepare_enable(hsphy->cfg_ahb_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); + goto poweroff_phy; + } + + /* Perform phy reset */ + ret = reset_control_assert(hsphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret); + goto disable_ahb_clk; + } + + /* 100 us delay to keep PHY in reset mode */ + usleep_range(100, 150); + + ret = reset_control_deassert(hsphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret); + goto disable_ahb_clk; + } + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5, + POR, POR); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, + FSEL_MASK, 0); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, + PLLBTUNE, PLLBTUNE); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_REFCLK_CTRL, + REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, + VBUSVLDEXTSEL0, VBUSVLDEXTSEL0); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1, + VBUSVLDEXT0, VBUSVLDEXT0); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2, + VREGBYPASS, VREGBYPASS); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL0, + SLEEPM, SLEEPM); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5, + POR, 0); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL, 0); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0); + + hsphy->phy_initialized = true; + + return 0; + +disable_ahb_clk: + clk_disable_unprepare(hsphy->cfg_ahb_clk); +poweroff_phy: + regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); + + return ret; +} + +static int qcom_snps_hsphy_exit(struct phy *phy) +{ + struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); + + reset_control_assert(hsphy->phy_reset); + clk_disable_unprepare(hsphy->cfg_ahb_clk); + regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); + hsphy->phy_initialized = false; + + return 0; +} + +static const struct phy_ops qcom_snps_hsphy_gen_ops = { + .init = qcom_snps_hsphy_init, + .exit = qcom_snps_hsphy_exit, + .owner = THIS_MODULE, +}; + +static const struct of_device_id qcom_snps_hsphy_of_match_table[] = { + { + .compatible = "qcom,sm8150-usb-hs-phy", + }, + { + .compatible = "qcom,usb-snps-hs-7nm-phy", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table); + +static int qcom_snps_hsphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qcom_snps_hsphy *hsphy; + struct phy_provider *phy_provider; + struct phy *generic_phy; + struct resource *res; + int ret, i; + int num; + + hsphy = devm_kzalloc(dev, sizeof(*hsphy), GFP_KERNEL); + if (!hsphy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hsphy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(hsphy->base)) + return PTR_ERR(hsphy->base); + + hsphy->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(hsphy->ref_clk)) { + ret = PTR_ERR(hsphy->ref_clk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get ref clk, %d\n", ret); + return ret; + } + + hsphy->phy_reset = devm_reset_control_get_by_index(&pdev->dev, 0); + if (IS_ERR(hsphy->phy_reset)) { + dev_err(dev, "failed to get phy core reset\n"); + return PTR_ERR(hsphy->phy_reset); + } + + num = ARRAY_SIZE(hsphy->vregs); + for (i = 0; i < num; i++) + hsphy->vregs[i].supply = qcom_snps_hsphy_vreg_names[i]; + + ret = devm_regulator_bulk_get(dev, num, hsphy->vregs); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get regulator supplies: %d\n", + ret); + return ret; + } + + generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops); + if (IS_ERR(generic_phy)) { + ret = PTR_ERR(generic_phy); + dev_err(dev, "failed to create phy, %d\n", ret); + return ret; + } + hsphy->phy = generic_phy; + + dev_set_drvdata(dev, hsphy); + phy_set_drvdata(generic_phy, hsphy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered Qcom-SNPS HS phy\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver qcom_snps_hsphy_driver = { + .probe = qcom_snps_hsphy_probe, + .driver = { + .name = "qcom-snps-hs-7nm-phy", + .of_match_table = qcom_snps_hsphy_of_match_table, + }, +}; + +module_platform_driver(qcom_snps_hsphy_driver); + +MODULE_DESCRIPTION("Qualcomm 7nm USB HS PHY driver"); +MODULE_LICENSE("GPL v2");