diff mbox series

[v6,2/3] clk: qcom: gcc: Add support for modem clocks in GCC

Message ID 1584211147-5570-3-git-send-email-tdas@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Add modem Clock controller (MSS CC) driver for SC7180 | expand

Commit Message

Taniya Das March 14, 2020, 6:39 p.m. UTC
Add the required modem clocks in global clock controller which are
required to bring the modem out of reset.

Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
 drivers/clk/qcom/gcc-sc7180.c | 72 ++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 71 insertions(+), 1 deletion(-)

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.
diff mbox series

Patch

diff --git a/drivers/clk/qcom/gcc-sc7180.c b/drivers/clk/qcom/gcc-sc7180.c
index 7f59fb8..6a51b5b 100644
--- a/drivers/clk/qcom/gcc-sc7180.c
+++ b/drivers/clk/qcom/gcc-sc7180.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2019, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
  */

 #include <linux/clk-provider.h>
@@ -2165,6 +2165,71 @@  static struct clk_branch gcc_video_xo_clk = {
 	},
 };

+static struct clk_branch gcc_mss_cfg_ahb_clk = {
+	.halt_reg = 0x8a000,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_cfg_ahb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_mfab_axis_clk = {
+	.halt_reg = 0x8a004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_mfab_axis_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_nav_axi_clk = {
+	.halt_reg = 0x8a00c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x8a00c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_nav_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_snoc_axi_clk = {
+	.halt_reg = 0x8a150,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a150,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_snoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gcc_mss_q6_memnoc_axi_clk = {
+	.halt_reg = 0x8a154,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8a154,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gcc_mss_q6_memnoc_axi_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
 static struct gdsc ufs_phy_gdsc = {
 	.gdscr = 0x77004,
 	.pd = {
@@ -2336,6 +2401,11 @@  static struct clk_regmap *gcc_sc7180_clocks[] = {
 	[GPLL7] = &gpll7.clkr,
 	[GPLL4] = &gpll4.clkr,
 	[GPLL1] = &gpll1.clkr,
+	[GCC_MSS_CFG_AHB_CLK] = &gcc_mss_cfg_ahb_clk.clkr,
+	[GCC_MSS_MFAB_AXIS_CLK] = &gcc_mss_mfab_axis_clk.clkr,
+	[GCC_MSS_NAV_AXI_CLK] = &gcc_mss_nav_axi_clk.clkr,
+	[GCC_MSS_Q6_MEMNOC_AXI_CLK] = &gcc_mss_q6_memnoc_axi_clk.clkr,
+	[GCC_MSS_SNOC_AXI_CLK] = &gcc_mss_snoc_axi_clk.clkr,
 };

 static const struct qcom_reset_map gcc_sc7180_resets[] = {