diff mbox series

[v14,5/6] soc: qcom: rpmh-rsc: Clear active mode configuration for wake TCS

Message ID 1585244270-637-6-git-send-email-mkshah@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Invoke rpmh_flush for non OSI targets | expand

Commit Message

Maulik Shah March 26, 2020, 5:37 p.m. UTC 
From: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>

For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
TCS can be re-purposed to send active requests. Once the active requests
are sent and response is received, the active mode configuration needs
to be cleared so that controller can use wake TCS for sending wake
requests.

Introduce enable_tcs_irq() to enable completion IRQ for repurposed TCSes.

Fixes: 2de4b8d33eab (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
[mkshah: call enable_tcs_irq() within drv->lock, update commit message]
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
---
 drivers/soc/qcom/rpmh-rsc.c | 77 +++++++++++++++++++++++++++++++--------------
 1 file changed, 54 insertions(+), 23 deletions(-)

Comments

Doug Anderson March 26, 2020, 6:20 p.m. UTC | #1 
Hi,

On Thu, Mar 26, 2020 at 10:38 AM Maulik Shah <mkshah@codeaurora.org> wrote:
>
> From: "Raju P.L.S.S.S.N" <rplsssn@codeaurora.org>
>
> For RSCs that have sleep & wake TCS but no dedicated active TCS, wake
> TCS can be re-purposed to send active requests. Once the active requests
> are sent and response is received, the active mode configuration needs
> to be cleared so that controller can use wake TCS for sending wake
> requests.
>
> Introduce enable_tcs_irq() to enable completion IRQ for repurposed TCSes.
>
> Fixes: 2de4b8d33eab (drivers: qcom: rpmh-rsc: allow active requests from wake TCS)
> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org>
> [mkshah: call enable_tcs_irq() within drv->lock, update commit message]
> Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
> ---
>  drivers/soc/qcom/rpmh-rsc.c | 77 +++++++++++++++++++++++++++++++--------------
>  1 file changed, 54 insertions(+), 23 deletions(-)

I was writing my review of v1 at the same time you sent this.  Looks
like your patch does address the most important piece of feedback I
had (adjusting the interrupt enable under spinlock), but some of the
other feedback might be nice to incorporate:

https://lore.kernel.org/r/CAD=FV=XmBQb8yfx14T-tMQ68F-h=3UHog744b3X3JZViu15+4g@mail.gmail.com

-Doug
diff mbox series

Patch

diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
index ee052cc..8fa70b4 100644
--- a/drivers/soc/qcom/rpmh-rsc.c
+++ b/drivers/soc/qcom/rpmh-rsc.c
@@ -207,6 +207,42 @@  static const struct tcs_request *get_req_from_tcs(struct rsc_drv *drv,
 	return NULL;
 }
 
+static void __tcs_trigger(struct rsc_drv *drv, int tcs_id, bool trigger)
+{
+	u32 enable;
+
+	/*
+	 * HW req: Clear the DRV_CONTROL and enable TCS again
+	 * While clearing ensure that the AMC mode trigger is cleared
+	 * and then the mode enable is cleared.
+	 */
+	enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, 0);
+	enable &= ~TCS_AMC_MODE_TRIGGER;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	enable &= ~TCS_AMC_MODE_ENABLE;
+	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+
+	if (trigger) {
+		/* Enable the AMC mode on the TCS and then trigger the TCS */
+		enable = TCS_AMC_MODE_ENABLE;
+		write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+		enable |= TCS_AMC_MODE_TRIGGER;
+		write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
+	}
+}
+
+static void enable_tcs_irq(struct rsc_drv *drv, int tcs_id, bool enable)
+{
+	u32 data;
+
+	data = read_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, 0);
+	if (enable)
+		data |= BIT(tcs_id);
+	else
+		data &= ~BIT(tcs_id);
+	write_tcs_reg(drv, RSC_DRV_IRQ_ENABLE, 0, data);
+}
+
 /**
  * tcs_tx_done: TX Done interrupt handler
  */
@@ -243,6 +279,14 @@  static irqreturn_t tcs_tx_done(int irq, void *p)
 		}
 
 		trace_rpmh_tx_done(drv, i, req, err);
+
+		/*
+		 * If wake tcs was re-purposed for sending active
+		 * votes, clear AMC trigger & enable modes and
+		 * disable interrupt for this TCS
+		 */
+		if (!drv->tcs[ACTIVE_TCS].num_tcs)
+			__tcs_trigger(drv, i, false);
 skip:
 		/* Reclaim the TCS */
 		write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, i, 0);
@@ -250,6 +294,13 @@  static irqreturn_t tcs_tx_done(int irq, void *p)
 		write_tcs_reg(drv, RSC_DRV_IRQ_CLEAR, 0, BIT(i));
 		spin_lock(&drv->lock);
 		clear_bit(i, drv->tcs_in_use);
+		/*
+		 * Disable interrupt for WAKE TCS to avoid being
+		 * spammed with interrupts coming when the solver
+		 * sends its wake votes.
+		 */
+		if (!drv->tcs[ACTIVE_TCS].num_tcs)
+			enable_tcs_irq(drv, i, false);
 		spin_unlock(&drv->lock);
 		if (req)
 			rpmh_tx_done(req, err);
@@ -291,28 +342,6 @@  static void __tcs_buffer_write(struct rsc_drv *drv, int tcs_id, int cmd_id,
 	write_tcs_reg(drv, RSC_DRV_CMD_ENABLE, tcs_id, cmd_enable);
 }
 
-static void __tcs_trigger(struct rsc_drv *drv, int tcs_id)
-{
-	u32 enable;
-
-	/*
-	 * HW req: Clear the DRV_CONTROL and enable TCS again
-	 * While clearing ensure that the AMC mode trigger is cleared
-	 * and then the mode enable is cleared.
-	 */
-	enable = read_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, 0);
-	enable &= ~TCS_AMC_MODE_TRIGGER;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-	enable &= ~TCS_AMC_MODE_ENABLE;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-
-	/* Enable the AMC mode on the TCS and then trigger the TCS */
-	enable = TCS_AMC_MODE_ENABLE;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-	enable |= TCS_AMC_MODE_TRIGGER;
-	write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
-}
-
 static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
 				  const struct tcs_request *msg)
 {
@@ -383,10 +412,12 @@  static int tcs_write(struct rsc_drv *drv, const struct tcs_request *msg)
 
 	tcs->req[tcs_id - tcs->offset] = msg;
 	set_bit(tcs_id, drv->tcs_in_use);
+	if (msg->state == RPMH_ACTIVE_ONLY_STATE && tcs->type != ACTIVE_TCS)
+		enable_tcs_irq(drv, tcs_id, true);
 	spin_unlock(&drv->lock);
 
 	__tcs_buffer_write(drv, tcs_id, 0, msg);
-	__tcs_trigger(drv, tcs_id);
+	__tcs_trigger(drv, tcs_id, true);
 
 done_write:
 	spin_unlock_irqrestore(&tcs->lock, flags);