From patchwork Fri Apr 3 02:23:51 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Wesley Cheng X-Patchwork-Id: 11471779 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 61A8815AB for ; Fri, 3 Apr 2020 02:24:25 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 3429A2054F for ; Fri, 3 Apr 2020 02:24:25 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=fail reason="signature verification failed" (1024-bit key) header.d=mg.codeaurora.org header.i=@mg.codeaurora.org header.b="s6nYbbxk" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2389809AbgDCCYM (ORCPT ); Thu, 2 Apr 2020 22:24:12 -0400 Received: from mail26.static.mailgun.info ([104.130.122.26]:10275 "EHLO mail26.static.mailgun.info" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2388709AbgDCCYM (ORCPT ); Thu, 2 Apr 2020 22:24:12 -0400 DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1585880651; h=References: In-Reply-To: Message-Id: Date: Subject: Cc: To: From: Sender; bh=/4G3Ae+INIzO2WVNVzfsBmRoRQOoJZeJCrXixtnEs3o=; b=s6nYbbxk2qmm9nuI61xZH3Qv1SYVSaVh/oqKrXnml8VPDHvxidC5N4112JK1v/Wy19c4rkmO h6I29Y1VMbxC4iT4S+HmLsPBKCIbEDi29ou4bp4KnfdfDwrvGS4p2bVrmbPNapHWf7yDYEnl 1V9mvsrV/Prm7ya0Fp+sDT6AzN0= X-Mailgun-Sending-Ip: 104.130.122.26 X-Mailgun-Sid: WyI1MzIzYiIsICJsaW51eC1hcm0tbXNtQHZnZXIua2VybmVsLm9yZyIsICJiZTllNGEiXQ== Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by mxa.mailgun.org with ESMTP id 5e869e4a.7f31213a31f0-smtp-out-n03; Fri, 03 Apr 2020 02:24:10 -0000 (UTC) Received: by smtp.codeaurora.org (Postfix, from userid 1001) id 6D4B4C433D2; Fri, 3 Apr 2020 02:24:10 +0000 (UTC) X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-caf-mail-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-1.0 required=2.0 tests=ALL_TRUSTED,SPF_NONE autolearn=unavailable autolearn_force=no version=3.4.0 Received: from wcheng-linux.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: wcheng) by smtp.codeaurora.org (Postfix) with ESMTPSA id 594A5C433F2; Fri, 3 Apr 2020 02:24:07 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.3.2 smtp.codeaurora.org 594A5C433F2 Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=none smtp.mailfrom=wcheng@codeaurora.org From: Wesley Cheng To: agross@kernel.org, bjorn.andersson@linaro.org, kishon@ti.com, robh+dt@kernel.org, mark.rutland@arm.com, p.zabel@pengutronix.de, mgautam@codeaurora.org Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Wesley Cheng Subject: [PATCH v5 2/5] phy: qcom-snps: Add SNPS USB PHY driver for QCOM based SOCs Date: Thu, 2 Apr 2020 19:23:51 -0700 Message-Id: <1585880634-15222-3-git-send-email-wcheng@codeaurora.org> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1585880634-15222-1-git-send-email-wcheng@codeaurora.org> References: <1585880634-15222-1-git-send-email-wcheng@codeaurora.org> Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org This adds the SNPS FemtoPHY V2 driver used in QCOM SOCs. There are potentially multiple instances of this UTMI PHY on the SOC, all which can utilize this driver. The V2 driver will have a different register map compared to V1. Signed-off-by: Wesley Cheng Reviewed-by: Philipp Zabel Reviewed-by: Manu Gautam Reviewed-by: Vinod Koul --- drivers/phy/qualcomm/Kconfig | 10 + drivers/phy/qualcomm/Makefile | 1 + drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c | 297 ++++++++++++++++++++++++++ 3 files changed, 308 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig index e46824d..3a57551 100644 --- a/drivers/phy/qualcomm/Kconfig +++ b/drivers/phy/qualcomm/Kconfig @@ -85,6 +85,16 @@ config PHY_QCOM_USB_HS Support for the USB high-speed ULPI compliant phy on Qualcomm chipsets. +config PHY_QCOM_USB_SNPS_FEMTO_V2 + tristate "Qualcomm SNPS FEMTO USB HS PHY V2 module" + depends on OF && (ARCH_QCOM || COMPILE_TEST) + select GENERIC_PHY + help + Enable support for the USB high-speed SNPS Femto phy on Qualcomm + chipsets. This PHY has differences in the register map compared + to the V1 variants. The PHY is paired with a Synopsys DWC3 USB + controller on MSM SOCs. + config PHY_QCOM_USB_HSIC tristate "Qualcomm USB HSIC ULPI PHY module" depends on USB_ULPI_BUS diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile index 283251d..320fa71 100644 --- a/drivers/phy/qualcomm/Makefile +++ b/drivers/phy/qualcomm/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o +obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2) += phy-qcom-snps-femto-v2.o diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c new file mode 100644 index 0000000..04dd743 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c @@ -0,0 +1,297 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB2_PHY_USB_PHY_UTMI_CTRL0 (0x3c) +#define OPMODE_MASK GENMASK(4, 3) +#define OPMODE_NORMAL (0x00) +#define OPMODE_NONDRIVING BIT(3) +#define SLEEPM BIT(0) +#define TERMSEL BIT(5) + +#define USB2_PHY_USB_PHY_UTMI_CTRL1 (0x40) +#define XCVRSEL BIT(0) + +#define USB2_PHY_USB_PHY_UTMI_CTRL5 (0x50) +#define POR BIT(1) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0 (0x54) +#define RETENABLEN BIT(3) +#define FSEL_MASK GENMASK(7, 5) +#define FSEL_DEFAULT (0x3 << 4) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1 (0x58) +#define VBUSVLDEXTSEL0 BIT(4) +#define PLLBTUNE BIT(5) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2 (0x5c) +#define VREGBYPASS BIT(0) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL1 (0x60) +#define VBUSVLDEXT0 BIT(0) + +#define USB2_PHY_USB_PHY_HS_PHY_CTRL2 (0x64) +#define USB2_AUTO_RESUME BIT(0) +#define USB2_SUSPEND_N BIT(2) +#define USB2_SUSPEND_N_SEL BIT(3) + +#define USB2_PHY_USB_PHY_CFG0 (0x94) +#define UTMI_PHY_DATAPATH_CTRL_OVERRIDE_EN BIT(0) +#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN BIT(1) + +#define USB2_PHY_USB_PHY_REFCLK_CTRL (0xa0) +#define REFCLK_SEL_MASK GENMASK(1, 0) +#define REFCLK_SEL_DEFAULT (0x2 << 0) + +static const char * const qcom_snps_hsphy_vreg_names[] = { + "vdda-pll", "vdda33", "vdda18", +}; + +#define SNPS_HS_NUM_VREGS ARRAY_SIZE(qcom_snps_hsphy_vreg_names) + +/** + * struct qcom_snps_hsphy - structure holding snps hs phy attributes + * + * @phy: generic phy + * @base: iomapped memory space for qubs2 phy + * + * @cfg_ahb_clk: AHB2PHY interface clock + * @ref_clk: phy reference clock + * @iface_clk: phy interface clock + * @phy_reset: phy reset control + * @vregs: regulator supplies bulk data + + * @phy_initialized: if PHY has been initialized correctly + * + */ +struct qcom_snps_hsphy { + struct phy *phy; + void __iomem *base; + + struct clk *cfg_ahb_clk; + struct clk *ref_clk; + struct reset_control *phy_reset; + struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS]; + + bool phy_initialized; +}; + +static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset, + u32 mask, u32 val) +{ + u32 reg; + + reg = readl(base + offset); + reg &= ~mask; + reg |= val & mask; + writel(reg, base + offset); + + /* Ensure above write is completed */ + readl(base + offset); +} + +static int qcom_snps_hsphy_init(struct phy *phy) +{ + struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); + int ret; + + dev_vdbg(&phy->dev, "%s(): Initializing SNPS HS phy\n", __func__); + + /* turn on regulator supplies */ + ret = regulator_bulk_enable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); + if (ret) + return ret; + + /* enable ahb interface clock to program phy */ + ret = clk_prepare_enable(hsphy->cfg_ahb_clk); + if (ret) { + dev_err(&phy->dev, "failed to enable cfg ahb clock, %d\n", ret); + goto poweroff_phy; + } + + /* Perform phy reset */ + ret = reset_control_assert(hsphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "failed to assert phy_reset, %d\n", ret); + goto disable_ahb_clk; + } + + /* 100 us delay to keep PHY in reset mode */ + usleep_range(100, 150); + + ret = reset_control_deassert(hsphy->phy_reset); + if (ret) { + dev_err(&phy->dev, "failed to de-assert phy_reset, %d\n", ret); + goto disable_ahb_clk; + } + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5, + POR, POR); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0, + FSEL_MASK, 0); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, + PLLBTUNE, PLLBTUNE); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_REFCLK_CTRL, + REFCLK_SEL_DEFAULT, REFCLK_SEL_MASK); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1, + VBUSVLDEXTSEL0, VBUSVLDEXTSEL0); + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1, + VBUSVLDEXT0, VBUSVLDEXT0); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2, + VREGBYPASS, VREGBYPASS); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N, + USB2_SUSPEND_N_SEL | USB2_SUSPEND_N); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL0, + SLEEPM, SLEEPM); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_UTMI_CTRL5, + POR, 0); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2, + USB2_SUSPEND_N_SEL, 0); + + qcom_snps_hsphy_write_mask(hsphy->base, USB2_PHY_USB_PHY_CFG0, + UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0); + + hsphy->phy_initialized = true; + + return 0; + +disable_ahb_clk: + clk_disable_unprepare(hsphy->cfg_ahb_clk); +poweroff_phy: + regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); + + return ret; +} + +static int qcom_snps_hsphy_exit(struct phy *phy) +{ + struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy); + + reset_control_assert(hsphy->phy_reset); + clk_disable_unprepare(hsphy->cfg_ahb_clk); + regulator_bulk_disable(ARRAY_SIZE(hsphy->vregs), hsphy->vregs); + hsphy->phy_initialized = false; + + return 0; +} + +static const struct phy_ops qcom_snps_hsphy_gen_ops = { + .init = qcom_snps_hsphy_init, + .exit = qcom_snps_hsphy_exit, + .owner = THIS_MODULE, +}; + +static const struct of_device_id qcom_snps_hsphy_of_match_table[] = { + { + .compatible = "qcom,sm8150-usb-hs-phy", + }, + { + .compatible = "qcom,usb-snps-hs-7nm-phy", + }, + { + .compatible = "qcom,usb-snps-femto-v2-phy", + }, + { }, +}; +MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table); + +static int qcom_snps_hsphy_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct qcom_snps_hsphy *hsphy; + struct phy_provider *phy_provider; + struct phy *generic_phy; + struct resource *res; + int ret, i; + int num; + + hsphy = devm_kzalloc(dev, sizeof(*hsphy), GFP_KERNEL); + if (!hsphy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + hsphy->base = devm_ioremap_resource(dev, res); + if (IS_ERR(hsphy->base)) + return PTR_ERR(hsphy->base); + + hsphy->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(hsphy->ref_clk)) { + ret = PTR_ERR(hsphy->ref_clk); + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get ref clk, %d\n", ret); + return ret; + } + + hsphy->phy_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(hsphy->phy_reset)) { + dev_err(dev, "failed to get phy core reset\n"); + return PTR_ERR(hsphy->phy_reset); + } + + num = ARRAY_SIZE(hsphy->vregs); + for (i = 0; i < num; i++) + hsphy->vregs[i].supply = qcom_snps_hsphy_vreg_names[i]; + + ret = devm_regulator_bulk_get(dev, num, hsphy->vregs); + if (ret) { + if (ret != -EPROBE_DEFER) + dev_err(dev, "failed to get regulator supplies: %d\n", + ret); + return ret; + } + + generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops); + if (IS_ERR(generic_phy)) { + ret = PTR_ERR(generic_phy); + dev_err(dev, "failed to create phy, %d\n", ret); + return ret; + } + hsphy->phy = generic_phy; + + dev_set_drvdata(dev, hsphy); + phy_set_drvdata(generic_phy, hsphy); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered Qcom-SNPS HS phy\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver qcom_snps_hsphy_driver = { + .probe = qcom_snps_hsphy_probe, + .driver = { + .name = "qcom-snps-hs-femto-v2-phy", + .of_match_table = qcom_snps_hsphy_of_match_table, + }, +}; + +module_platform_driver(qcom_snps_hsphy_driver); + +MODULE_DESCRIPTION("Qualcomm SNPS FEMTO USB HS PHY V2 driver"); +MODULE_LICENSE("GPL v2");