diff mbox series

[v2,2/4] drm/msm: dsi: Use OPP API to set clk/perf state

Message ID 1593688151-22616-3-git-send-email-rnayak@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series DVFS support for dpu and dsi | expand

Commit Message

Rajendra Nayak July 2, 2020, 11:09 a.m. UTC
On SDM845 and SC7180 DSI needs to express a performance state
requirement on a power domain depending on the clock rates.
Use OPP table from DT to register with OPP framework and use
dev_pm_opp_set_rate() to set the clk/perf state.

dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate()
for devices without an OPP table, hence the change works fine
on devices/platforms which only need to set a clock rate.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/gpu/drm/msm/dsi/dsi_host.c | 26 ++++++++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

Comments

Matthias Kaehlcke July 6, 2020, 4:10 p.m. UTC | #1
On Thu, Jul 02, 2020 at 04:39:09PM +0530, Rajendra Nayak wrote:
> On SDM845 and SC7180 DSI needs to express a performance state
> requirement on a power domain depending on the clock rates.
> Use OPP table from DT to register with OPP framework and use
> dev_pm_opp_set_rate() to set the clk/perf state.
> 
> dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate()
> for devices without an OPP table, hence the change works fine
> on devices/platforms which only need to set a clock rate.
> 
> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
> ---
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 26 ++++++++++++++++++++++++--
>  1 file changed, 24 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 11ae5b8..09e16b8 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -14,6 +14,7 @@
>  #include <linux/of_graph.h>
>  #include <linux/of_irq.h>
>  #include <linux/pinctrl/consumer.h>
> +#include <linux/pm_opp.h>
>  #include <linux/regmap.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/spinlock.h>
> @@ -111,6 +112,9 @@ struct msm_dsi_host {
>  	struct clk *pixel_clk_src;
>  	struct clk *byte_intf_clk;
>  
> +	struct opp_table *opp_table;
> +	bool has_opp_table;
> +
>  	u32 byte_clk_rate;
>  	u32 pixel_clk_rate;
>  	u32 esc_clk_rate;
> @@ -512,9 +516,10 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
>  	DBG("Set clk rates: pclk=%d, byteclk=%d",
>  		msm_host->mode->clock, msm_host->byte_clk_rate);
>  
> -	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
> +	ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
> +				  msm_host->byte_clk_rate);
>  	if (ret) {
> -		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
> +		pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);
>  		return ret;
>  	}
>  
> @@ -658,6 +663,8 @@ int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
>  
>  void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host)
>  {
> +	/* Drop the performance state vote */
> +	dev_pm_opp_set_rate(&msm_host->pdev->dev, 0);
>  	clk_disable_unprepare(msm_host->esc_clk);
>  	clk_disable_unprepare(msm_host->pixel_clk);
>  	if (msm_host->byte_intf_clk)
> @@ -1879,6 +1886,18 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
>  		goto fail;
>  	}
>  
> +	msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte");
> +	if (IS_ERR(msm_host->opp_table))
> +		return PTR_ERR(msm_host->opp_table);
> +	/* OPP table is optional */
> +	ret = dev_pm_opp_of_add_table(&pdev->dev);
> +	if (!ret) {
> +		msm_host->has_opp_table = true;
> +	} else if (ret != -ENODEV) {
> +		dev_err(&pdev->dev, "invalid OPP table in device tree\n");

  		dev_pm_opp_put_clkname(msm_host->opp_table);

> +		return ret;
> +	}

With the missing _put_clkname() fixed:

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Rajendra Nayak July 7, 2020, 4:28 a.m. UTC | #2
On 7/6/2020 9:40 PM, Matthias Kaehlcke wrote:
> On Thu, Jul 02, 2020 at 04:39:09PM +0530, Rajendra Nayak wrote:
>> On SDM845 and SC7180 DSI needs to express a performance state
>> requirement on a power domain depending on the clock rates.
>> Use OPP table from DT to register with OPP framework and use
>> dev_pm_opp_set_rate() to set the clk/perf state.
>>
>> dev_pm_opp_set_rate() is designed to be equivalent to clk_set_rate()
>> for devices without an OPP table, hence the change works fine
>> on devices/platforms which only need to set a clock rate.
>>
>> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
>> ---
>>   drivers/gpu/drm/msm/dsi/dsi_host.c | 26 ++++++++++++++++++++++++--
>>   1 file changed, 24 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> index 11ae5b8..09e16b8 100644
>> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
>> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
>> @@ -14,6 +14,7 @@
>>   #include <linux/of_graph.h>
>>   #include <linux/of_irq.h>
>>   #include <linux/pinctrl/consumer.h>
>> +#include <linux/pm_opp.h>
>>   #include <linux/regmap.h>
>>   #include <linux/regulator/consumer.h>
>>   #include <linux/spinlock.h>
>> @@ -111,6 +112,9 @@ struct msm_dsi_host {
>>   	struct clk *pixel_clk_src;
>>   	struct clk *byte_intf_clk;
>>   
>> +	struct opp_table *opp_table;
>> +	bool has_opp_table;
>> +
>>   	u32 byte_clk_rate;
>>   	u32 pixel_clk_rate;
>>   	u32 esc_clk_rate;
>> @@ -512,9 +516,10 @@ int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
>>   	DBG("Set clk rates: pclk=%d, byteclk=%d",
>>   		msm_host->mode->clock, msm_host->byte_clk_rate);
>>   
>> -	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
>> +	ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
>> +				  msm_host->byte_clk_rate);
>>   	if (ret) {
>> -		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
>> +		pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);
>>   		return ret;
>>   	}
>>   
>> @@ -658,6 +663,8 @@ int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
>>   
>>   void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host)
>>   {
>> +	/* Drop the performance state vote */
>> +	dev_pm_opp_set_rate(&msm_host->pdev->dev, 0);
>>   	clk_disable_unprepare(msm_host->esc_clk);
>>   	clk_disable_unprepare(msm_host->pixel_clk);
>>   	if (msm_host->byte_intf_clk)
>> @@ -1879,6 +1886,18 @@ int msm_dsi_host_init(struct msm_dsi *msm_dsi)
>>   		goto fail;
>>   	}
>>   
>> +	msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte");
>> +	if (IS_ERR(msm_host->opp_table))
>> +		return PTR_ERR(msm_host->opp_table);
>> +	/* OPP table is optional */
>> +	ret = dev_pm_opp_of_add_table(&pdev->dev);
>> +	if (!ret) {
>> +		msm_host->has_opp_table = true;
>> +	} else if (ret != -ENODEV) {
>> +		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
> 
>    		dev_pm_opp_put_clkname(msm_host->opp_table);
> 
>> +		return ret;
>> +	}
> 
> With the missing _put_clkname() fixed:

Thanks, I'll fix and resend.

> 
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
index 11ae5b8..09e16b8 100644
--- a/drivers/gpu/drm/msm/dsi/dsi_host.c
+++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
@@ -14,6 +14,7 @@ 
 #include <linux/of_graph.h>
 #include <linux/of_irq.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/pm_opp.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/spinlock.h>
@@ -111,6 +112,9 @@  struct msm_dsi_host {
 	struct clk *pixel_clk_src;
 	struct clk *byte_intf_clk;
 
+	struct opp_table *opp_table;
+	bool has_opp_table;
+
 	u32 byte_clk_rate;
 	u32 pixel_clk_rate;
 	u32 esc_clk_rate;
@@ -512,9 +516,10 @@  int dsi_link_clk_set_rate_6g(struct msm_dsi_host *msm_host)
 	DBG("Set clk rates: pclk=%d, byteclk=%d",
 		msm_host->mode->clock, msm_host->byte_clk_rate);
 
-	ret = clk_set_rate(msm_host->byte_clk, msm_host->byte_clk_rate);
+	ret = dev_pm_opp_set_rate(&msm_host->pdev->dev,
+				  msm_host->byte_clk_rate);
 	if (ret) {
-		pr_err("%s: Failed to set rate byte clk, %d\n", __func__, ret);
+		pr_err("%s: dev_pm_opp_set_rate failed %d\n", __func__, ret);
 		return ret;
 	}
 
@@ -658,6 +663,8 @@  int dsi_link_clk_enable_v2(struct msm_dsi_host *msm_host)
 
 void dsi_link_clk_disable_6g(struct msm_dsi_host *msm_host)
 {
+	/* Drop the performance state vote */
+	dev_pm_opp_set_rate(&msm_host->pdev->dev, 0);
 	clk_disable_unprepare(msm_host->esc_clk);
 	clk_disable_unprepare(msm_host->pixel_clk);
 	if (msm_host->byte_intf_clk)
@@ -1879,6 +1886,18 @@  int msm_dsi_host_init(struct msm_dsi *msm_dsi)
 		goto fail;
 	}
 
+	msm_host->opp_table = dev_pm_opp_set_clkname(&pdev->dev, "byte");
+	if (IS_ERR(msm_host->opp_table))
+		return PTR_ERR(msm_host->opp_table);
+	/* OPP table is optional */
+	ret = dev_pm_opp_of_add_table(&pdev->dev);
+	if (!ret) {
+		msm_host->has_opp_table = true;
+	} else if (ret != -ENODEV) {
+		dev_err(&pdev->dev, "invalid OPP table in device tree\n");
+		return ret;
+	}
+
 	init_completion(&msm_host->dma_comp);
 	init_completion(&msm_host->video_comp);
 	mutex_init(&msm_host->dev_mutex);
@@ -1914,6 +1933,9 @@  void msm_dsi_host_destroy(struct mipi_dsi_host *host)
 	mutex_destroy(&msm_host->cmd_mutex);
 	mutex_destroy(&msm_host->dev_mutex);
 
+	if (msm_host->has_opp_table)
+		dev_pm_opp_of_remove_table(&msm_host->pdev->dev);
+	dev_pm_opp_put_clkname(msm_host->opp_table);
 	pm_runtime_disable(&msm_host->pdev->dev);
 }