@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/extcon.h>
+#include <linux/interconnect.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
@@ -43,6 +44,14 @@
#define SDM845_QSCRATCH_SIZE 0x400
#define SDM845_DWC3_CORE_SIZE 0xcd00
+/* Interconnect path bandwidths in MBps */
+#define USB_MEMORY_AVG_HS_BW MBps_to_icc(240)
+#define USB_MEMORY_PEAK_HS_BW MBps_to_icc(700)
+#define USB_MEMORY_AVG_SS_BW MBps_to_icc(1000)
+#define USB_MEMORY_PEAK_SS_BW MBps_to_icc(2500)
+#define APPS_USB_AVG_BW 0
+#define APPS_USB_PEAK_BW MBps_to_icc(40)
+
struct dwc3_acpi_pdata {
u32 qscratch_base_offset;
u32 qscratch_base_size;
@@ -76,6 +85,8 @@ struct dwc3_qcom {
enum usb_dr_mode mode;
bool is_suspended;
bool pm_suspended;
+ struct icc_path *icc_path_ddr;
+ struct icc_path *icc_path_apps;
};
static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
@@ -190,6 +201,96 @@ static int dwc3_qcom_register_extcon(struct dwc3_qcom *qcom)
return 0;
}
+static int dwc3_qcom_interconnect_enable(struct dwc3_qcom *qcom)
+{
+ int ret;
+
+ ret = icc_enable(qcom->icc_path_ddr);
+ if (ret)
+ return ret;
+
+ ret = icc_enable(qcom->icc_path_apps);
+ if (ret)
+ icc_disable(qcom->icc_path_ddr);
+
+ return ret;
+}
+
+static int dwc3_qcom_interconnect_disable(struct dwc3_qcom *qcom)
+{
+ int ret;
+
+ ret = icc_disable(qcom->icc_path_ddr);
+ if (ret)
+ return ret;
+
+ ret = icc_disable(qcom->icc_path_apps);
+ if (ret)
+ icc_enable(qcom->icc_path_ddr);
+
+ return ret;
+}
+
+/**
+ * dwc3_qcom_interconnect_init() - Get interconnect path handles
+ * and set bandwidhth.
+ * @qcom: Pointer to the concerned usb core.
+ *
+ */
+static int dwc3_qcom_interconnect_init(struct dwc3_qcom *qcom)
+{
+ struct device *dev = qcom->dev;
+ int ret;
+
+ qcom->icc_path_ddr = of_icc_get(dev, "usb-ddr");
+ if (IS_ERR(qcom->icc_path_ddr)) {
+ dev_err(dev, "failed to get usb-ddr path: %ld\n",
+ PTR_ERR(qcom->icc_path_ddr));
+ return PTR_ERR(qcom->icc_path_ddr);
+ }
+
+ qcom->icc_path_apps = of_icc_get(dev, "apps-usb");
+ if (IS_ERR(qcom->icc_path_apps)) {
+ dev_err(dev, "failed to get apps-usb path: %ld\n",
+ PTR_ERR(qcom->icc_path_apps));
+ return PTR_ERR(qcom->icc_path_apps);
+ }
+
+ if (usb_get_maximum_speed(&qcom->dwc3->dev) >= USB_SPEED_SUPER ||
+ usb_get_maximum_speed(&qcom->dwc3->dev) == USB_SPEED_UNKNOWN)
+ ret = icc_set_bw(qcom->icc_path_ddr,
+ USB_MEMORY_AVG_SS_BW, USB_MEMORY_PEAK_SS_BW);
+ else
+ ret = icc_set_bw(qcom->icc_path_ddr,
+ USB_MEMORY_AVG_HS_BW, USB_MEMORY_PEAK_HS_BW);
+
+ if (ret) {
+ dev_err(dev, "failed to set bandwidth for usb-ddr path: %d\n", ret);
+ return ret;
+ }
+
+ ret = icc_set_bw(qcom->icc_path_apps,
+ APPS_USB_AVG_BW, APPS_USB_PEAK_BW);
+ if (ret) {
+ dev_err(dev, "failed to set bandwidth for apps-usb path: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * dwc3_qcom_interconnect_exit() - Release interconnect path handles
+ * @qcom: Pointer to the concerned usb core.
+ *
+ * This function is used to release interconnect path handle.
+ */
+static void dwc3_qcom_interconnect_exit(struct dwc3_qcom *qcom)
+{
+ icc_put(qcom->icc_path_ddr);
+ icc_put(qcom->icc_path_apps);
+}
+
static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
{
if (qcom->hs_phy_irq) {
@@ -239,7 +340,7 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
{
u32 val;
- int i;
+ int i, ret;
if (qcom->is_suspended)
return 0;
@@ -251,6 +352,10 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom)
for (i = qcom->num_clocks - 1; i >= 0; i--)
clk_disable_unprepare(qcom->clks[i]);
+ ret = dwc3_qcom_interconnect_disable(qcom);
+ if (ret)
+ dev_warn(qcom->dev, "failed to disable interconnect: %d\n", ret);
+
qcom->is_suspended = true;
dwc3_qcom_enable_interrupts(qcom);
@@ -276,6 +381,10 @@ static int dwc3_qcom_resume(struct dwc3_qcom *qcom)
}
}
+ ret = dwc3_qcom_interconnect_enable(qcom);
+ if (ret)
+ dev_warn(qcom->dev, "failed to enable interconnect: %d\n", ret);
+
/* Clear existing events from PHY related to L2 in/out */
dwc3_qcom_setbits(qcom->qscratch_base, PWR_EVNT_IRQ_STAT_REG,
PWR_EVNT_LPM_IN_L2_MASK | PWR_EVNT_LPM_OUT_L2_MASK);
@@ -638,6 +747,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
goto depopulate;
}
+ ret = dwc3_qcom_interconnect_init(qcom);
+ if (ret)
+ goto depopulate;
+
qcom->mode = usb_get_dr_mode(&qcom->dwc3->dev);
/* enable vbus override for device mode */
@@ -647,7 +760,7 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
/* register extcon to override sw_vbus on Vbus change later */
ret = dwc3_qcom_register_extcon(qcom);
if (ret)
- goto depopulate;
+ goto interconnect_exit;
device_init_wakeup(&pdev->dev, 1);
qcom->is_suspended = false;
@@ -657,6 +770,8 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
return 0;
+interconnect_exit:
+ dwc3_qcom_interconnect_exit(qcom);
depopulate:
if (np)
of_platform_depopulate(&pdev->dev);
@@ -687,6 +802,7 @@ static int dwc3_qcom_remove(struct platform_device *pdev)
}
qcom->num_clocks = 0;
+ dwc3_qcom_interconnect_exit(qcom);
reset_control_assert(qcom->resets);
pm_runtime_allow(dev);