@@ -283,6 +283,42 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
}
EXPORT_SYMBOL(rpmsg_trysend_offchannel);
+/**
+ * rpmsg_get_signals() - get the signals for this endpoint
+ * @ept: the rpmsg endpoint
+ *
+ * Returns signal bits on success and an appropriate error value on failure.
+ */
+int rpmsg_get_signals(struct rpmsg_endpoint *ept)
+{
+ if (WARN_ON(!ept))
+ return -EINVAL;
+ if (!ept->ops->get_signals)
+ return -ENXIO;
+
+ return ept->ops->get_signals(ept);
+}
+EXPORT_SYMBOL(rpmsg_get_signals);
+
+/**
+ * rpmsg_set_signals() - set the remote signals for this endpoint
+ * @ept: the rpmsg endpoint
+ * @set: set mask for signals
+ * @clear: clear mask for signals
+ *
+ * Returns 0 on success and an appropriate error value on failure.
+ */
+int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear)
+{
+ if (WARN_ON(!ept))
+ return -EINVAL;
+ if (!ept->ops->set_signals)
+ return -ENXIO;
+
+ return ept->ops->set_signals(ept, set, clear);
+}
+EXPORT_SYMBOL(rpmsg_set_signals);
+
/*
* match a rpmsg channel with a channel info struct.
* this is used to make sure we're not creating rpmsg devices for channels
@@ -468,6 +504,10 @@ static int rpmsg_dev_probe(struct device *dev)
rpdev->ept = ept;
rpdev->src = ept->addr;
+
+ if (rpdrv->signals)
+ ept->sig_cb = rpdrv->signals;
+
}
err = rpdrv->probe(rpdev);
@@ -2,6 +2,7 @@
/*
* remote processor messaging bus internals
*
+ * Copyright (c) 2018, The Linux Foundation.
* Copyright (C) 2011 Texas Instruments, Inc.
* Copyright (C) 2011 Google, Inc.
*
@@ -47,6 +48,8 @@ struct rpmsg_device_ops {
* @trysendto: see @rpmsg_trysendto(), optional
* @trysend_offchannel: see @rpmsg_trysend_offchannel(), optional
* @poll: see @rpmsg_poll(), optional
+ * @get_signals: see @rpmsg_get_signals(), optional
+ * @set_signals: see @rpmsg_set_signals(), optional
*
* Indirection table for the operations that a rpmsg backend should implement.
* In addition to @destroy_ept, the backend must at least implement @send and
@@ -66,6 +69,8 @@ struct rpmsg_endpoint_ops {
void *data, int len);
__poll_t (*poll)(struct rpmsg_endpoint *ept, struct file *filp,
poll_table *wait);
+ int (*get_signals)(struct rpmsg_endpoint *ept);
+ int (*set_signals)(struct rpmsg_endpoint *ept, u32 set, u32 clear);
};
int rpmsg_register_device(struct rpmsg_device *rpdev);
@@ -2,6 +2,7 @@
/*
* Remote processor messaging
*
+ * Copyright (c) 2018 The Linux Foundation.
* Copyright (C) 2011 Texas Instruments, Inc.
* Copyright (C) 2011 Google, Inc.
* All rights reserved.
@@ -60,6 +61,7 @@ struct rpmsg_device {
};
typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
+typedef int (*rpmsg_rx_sig_t)(struct rpmsg_device *, void *, u32, u32);
/**
* struct rpmsg_endpoint - binds a local rpmsg address to its user
@@ -67,6 +69,7 @@ typedef int (*rpmsg_rx_cb_t)(struct rpmsg_device *, void *, int, void *, u32);
* @refcount: when this drops to zero, the ept is deallocated
* @cb: rx callback handler
* @cb_lock: must be taken before accessing/changing @cb
+ * @sig_cb: rx serial signal handler
* @addr: local rpmsg address
* @priv: private data for the driver's use
*
@@ -89,6 +92,7 @@ struct rpmsg_endpoint {
struct kref refcount;
rpmsg_rx_cb_t cb;
struct mutex cb_lock;
+ rpmsg_rx_sig_t sig_cb;
u32 addr;
void *priv;
@@ -102,6 +106,7 @@ struct rpmsg_endpoint {
* @probe: invoked when a matching rpmsg channel (i.e. device) is found
* @remove: invoked when the rpmsg channel is removed
* @callback: invoked when an inbound message is received on the channel
+ * @signals: invoked when a serial signal change is received on the channel
*/
struct rpmsg_driver {
struct device_driver drv;
@@ -109,6 +114,8 @@ struct rpmsg_driver {
int (*probe)(struct rpmsg_device *dev);
void (*remove)(struct rpmsg_device *dev);
int (*callback)(struct rpmsg_device *, void *, int, void *, u32);
+ int (*signals)(struct rpmsg_device *rpdev,
+ void *priv, u32 old, u32 new);
};
#if IS_ENABLED(CONFIG_RPMSG)
@@ -135,6 +142,9 @@ int rpmsg_trysend_offchannel(struct rpmsg_endpoint *ept, u32 src, u32 dst,
__poll_t rpmsg_poll(struct rpmsg_endpoint *ept, struct file *filp,
poll_table *wait);
+int rpmsg_get_signals(struct rpmsg_endpoint *ept);
+int rpmsg_set_signals(struct rpmsg_endpoint *ept, u32 set, u32 clear);
+
#else
static inline int register_rpmsg_device(struct rpmsg_device *dev)
@@ -242,6 +252,23 @@ static inline __poll_t rpmsg_poll(struct rpmsg_endpoint *ept,
return 0;
}
+static inline int rpmsg_get_signals(struct rpmsg_endpoint *ept)
+{
+ /* This shouldn't be possible */
+ WARN_ON(1);
+
+ return -ENXIO;
+}
+
+static inline int rpmsg_set_signals(struct rpmsg_endpoint *ept,
+ u32 set, u32 clear)
+{
+ /* This shouldn't be possible */
+ WARN_ON(1);
+
+ return -ENXIO;
+}
+
#endif /* IS_ENABLED(CONFIG_RPMSG) */
/* use a macro to avoid include chaining to get THIS_MODULE */