diff mbox series

[v1] Bluetooth: Use NVM files based on SoC ID for WCN3991

Message ID 1600184605-31611-1-git-send-email-gubbaven@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series [v1] Bluetooth: Use NVM files based on SoC ID for WCN3991 | expand

Commit Message

Venkata Lakshmi Narayana Gubba Sept. 15, 2020, 3:43 p.m. UTC
This change will allow to use different NVM file based
on WCN3991 BT SoC ID.Need to use different NVM file based on
fab location for WCN3991 BT SoC.

Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
---
 drivers/bluetooth/btqca.c   | 41 +++++++++++++++++++++++++----------------
 drivers/bluetooth/btqca.h   | 13 ++++++++-----
 drivers/bluetooth/hci_qca.c | 11 +++++------
 3 files changed, 38 insertions(+), 27 deletions(-)

Comments

Marcel Holtmann Sept. 16, 2020, 2:27 p.m. UTC | #1
Hi Venkata,

> This change will allow to use different NVM file based
> on WCN3991 BT SoC ID.Need to use different NVM file based on
> fab location for WCN3991 BT SoC.
> 
> Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
> ---
> drivers/bluetooth/btqca.c   | 41 +++++++++++++++++++++++++----------------
> drivers/bluetooth/btqca.h   | 13 ++++++++-----
> drivers/bluetooth/hci_qca.c | 11 +++++------
> 3 files changed, 38 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index ce9dcff..a7e72f1 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -14,12 +14,11 @@
> 
> #define VERSION "0.1"
> 
> -int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> +int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
> 			 enum qca_btsoc_type soc_type)
> {
> 	struct sk_buff *skb;
> 	struct edl_event_hdr *edl;
> -	struct qca_btsoc_version *ver;
> 	char cmd;
> 	int err = 0;
> 	u8 event_type = HCI_EV_VENDOR;
> @@ -70,9 +69,9 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> 	}
> 
> 	if (soc_type >= QCA_WCN3991)
> -		memmove(&edl->data, &edl->data[1], sizeof(*ver));
> -
> -	ver = (struct qca_btsoc_version *)(edl->data);
> +		memcpy(ver, &edl->data[1], sizeof(*ver));

any reason to use &edl->data[1] and not just edl->data + 1?

> +	else
> +		memcpy(ver, &edl->data, sizeof(*ver));
> 
> 	bt_dev_info(hdev, "QCA Product ID   :0x%08x",
> 		    le32_to_cpu(ver->product_id));
> @@ -83,13 +82,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> 	bt_dev_info(hdev, "QCA Patch Version:0x%08x",
> 		    le16_to_cpu(ver->patch_ver));
> 
> -	/* QCA chipset version can be decided by patch and SoC
> -	 * version, combination with upper 2 bytes from SoC
> -	 * and lower 2 bytes from patch will be used.
> -	 */
> -	*soc_version = (le32_to_cpu(ver->soc_id) << 16) |
> -		       (le16_to_cpu(ver->rom_ver) & 0x0000ffff);
> -	if (*soc_version == 0)
> +	if (le32_to_cpu(ver->soc_id) == 0 || le16_to_cpu(ver->rom_ver) == 0)
> 		err = -EILSEQ;
> 
> out:
> @@ -446,15 +439,25 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
> EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
> 
> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> -		   enum qca_btsoc_type soc_type, u32 soc_ver,
> +		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
> 		   const char *firmware_name)
> {
> 	struct qca_fw_config config;
> 	int err;
> 	u8 rom_ver = 0;
> +	u32 soc_ver;
> 
> 	bt_dev_dbg(hdev, "QCA setup on UART");
> 
> +	/* QCA chipset version can be decided by patch and SoC
> +	 * version, combination with upper 2 bytes from SoC
> +	 * and lower 2 bytes from patch will be used.
> +	 */
> +	soc_ver = (le32_to_cpu(ver.soc_id) << 16) |
> +		       (le16_to_cpu(ver.rom_ver) & 0x0000ffff);

Please indent this properly.

I am also confused about the 0x0000ffff since it is just 16-bit value in the first place. Also where do you want to shift the 32-bit value to.

Frankly, I find all this version magic kinda questionable.

> +
> +	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
> +
> 	config.user_baud_rate = baudrate;
> 
> 	/* Download rampatch file */
> @@ -491,9 +494,15 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> 	if (firmware_name)
> 		snprintf(config.fwname, sizeof(config.fwname),
> 			 "qca/%s", firmware_name);
> -	else if (qca_is_wcn399x(soc_type))
> -		snprintf(config.fwname, sizeof(config.fwname),
> -			 "qca/crnv%02x.bin", rom_ver);
> +	else if (qca_is_wcn399x(soc_type)) {
> +		if (ver.soc_id == QCA_WCN3991_SOC_ID) {
> +			snprintf(config.fwname, sizeof(config.fwname),
> +				 "qca/crnv%02xu.bin", rom_ver);
> +		} else {
> +			snprintf(config.fwname, sizeof(config.fwname),
> +				 "qca/crnv%02x.bin", rom_ver);
> +		}
> +	}
> 	else if (soc_type == QCA_QCA6390)
> 		snprintf(config.fwname, sizeof(config.fwname),
> 			 "qca/htnv%02x.bin", rom_ver);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index d81b74c..d01a9f5 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -34,6 +34,8 @@
> #define QCA_HCI_CC_OPCODE		0xFC00
> #define QCA_HCI_CC_SUCCESS		0x00
> 
> +#define QCA_WCN3991_SOC_ID		(0x40014320)
> +
> enum qca_baudrate {
> 	QCA_BAUDRATE_115200 	= 0,
> 	QCA_BAUDRATE_57600,
> @@ -136,9 +138,9 @@ enum qca_btsoc_type {
> 
> int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> -		   enum qca_btsoc_type soc_type, u32 soc_ver,
> +		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
> 		   const char *firmware_name);
> -int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> +int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
> 			 enum qca_btsoc_type);
> int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
> @@ -155,13 +157,14 @@ static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdad
> }
> 
> static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> -				 enum qca_btsoc_type soc_type, u32 soc_ver,
> -				 const char *firmware_name)
> +		enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
> +				const char *firmware_name)

Please use proper indentation.

> {
> 	return -EOPNOTSUPP;
> }
> 
> -static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> +static inline int qca_read_soc_version(struct hci_dev *hdev,
> +				       struct qca_btsoc_version *ver,
> 				       enum qca_btsoc_type)
> {
> 	return -EOPNOTSUPP;
> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
> index 244b8fe..4c32c60 100644
> --- a/drivers/bluetooth/hci_qca.c
> +++ b/drivers/bluetooth/hci_qca.c
> @@ -1649,7 +1649,7 @@ static int qca_setup(struct hci_uart *hu)
> 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
> 	const char *firmware_name = qca_get_firmware_name(hu);
> 	int ret;
> -	int soc_ver = 0;
> +	struct qca_btsoc_version ver;
> 
> 	ret = qca_check_speeds(hu);
> 	if (ret)
> @@ -1678,7 +1678,7 @@ static int qca_setup(struct hci_uart *hu)
> 	if (qca_is_wcn399x(soc_type)) {
> 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
> 
> -		ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
> +		ret = qca_read_soc_version(hdev, &ver, soc_type);
> 		if (ret)
> 			return ret;
> 	} else {
> @@ -1697,15 +1697,14 @@ static int qca_setup(struct hci_uart *hu)
> 
> 	if (!qca_is_wcn399x(soc_type)) {
> 		/* Get QCA version information */
> -		ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
> +		ret = qca_read_soc_version(hdev, &ver, soc_type);
> 		if (ret)
> 			return ret;
> 	}
> 
> -	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
> 	/* Setup patch / NVM configurations */
> -	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
> -			firmware_name);
> +	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, ver,
> +			     firmware_name);
> 	if (!ret) {
> 		set_bit(QCA_IBS_ENABLED, &qca->flags);
> 		qca_debugfs_init(hdev);

Regards

Marcel
Matthias Kaehlcke Sept. 16, 2020, 6:02 p.m. UTC | #2
Hi Venkata,

I agree with Marcel that the version magic is confusing ...

On Tue, Sep 15, 2020 at 09:13:25PM +0530, Venkata Lakshmi Narayana Gubba wrote:
> This change will allow to use different NVM file based
> on WCN3991 BT SoC ID.Need to use different NVM file based on
> fab location for WCN3991 BT SoC.
> 
> Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
> ---
>  drivers/bluetooth/btqca.c   | 41 +++++++++++++++++++++++++----------------
>  drivers/bluetooth/btqca.h   | 13 ++++++++-----
>  drivers/bluetooth/hci_qca.c | 11 +++++------
>  3 files changed, 38 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
> index ce9dcff..a7e72f1 100644
> --- a/drivers/bluetooth/btqca.c
> +++ b/drivers/bluetooth/btqca.c
> @@ -14,12 +14,11 @@
>  
>  #define VERSION "0.1"
>  
> -int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
> +int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
>  			 enum qca_btsoc_type soc_type)
>  {
>  	struct sk_buff *skb;
>  	struct edl_event_hdr *edl;
> -	struct qca_btsoc_version *ver;
>  	char cmd;
>  	int err = 0;
>  	u8 event_type = HCI_EV_VENDOR;
> @@ -70,9 +69,9 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>  	}
>  
>  	if (soc_type >= QCA_WCN3991)
> -		memmove(&edl->data, &edl->data[1], sizeof(*ver));
> -
> -	ver = (struct qca_btsoc_version *)(edl->data);
> +		memcpy(ver, &edl->data[1], sizeof(*ver));
> +	else
> +		memcpy(ver, &edl->data, sizeof(*ver));
>  
>  	bt_dev_info(hdev, "QCA Product ID   :0x%08x",
>  		    le32_to_cpu(ver->product_id));
> @@ -83,13 +82,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>  	bt_dev_info(hdev, "QCA Patch Version:0x%08x",
>  		    le16_to_cpu(ver->patch_ver));
>  
> -	/* QCA chipset version can be decided by patch and SoC
> -	 * version, combination with upper 2 bytes from SoC
> -	 * and lower 2 bytes from patch will be used.
> -	 */
> -	*soc_version = (le32_to_cpu(ver->soc_id) << 16) |
> -		       (le16_to_cpu(ver->rom_ver) & 0x0000ffff);
> -	if (*soc_version == 0)
> +	if (le32_to_cpu(ver->soc_id) == 0 || le16_to_cpu(ver->rom_ver) == 0)
>  		err = -EILSEQ;
>  
>  out:
> @@ -446,15 +439,25 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
>  EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
>  
>  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
> -		   enum qca_btsoc_type soc_type, u32 soc_ver,
> +		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>  		   const char *firmware_name)
>  {
>  	struct qca_fw_config config;
>  	int err;
>  	u8 rom_ver = 0;
> +	u32 soc_ver;
>  
>  	bt_dev_dbg(hdev, "QCA setup on UART");
>  
> +	/* QCA chipset version can be decided by patch and SoC
> +	 * version, combination with upper 2 bytes from SoC
> +	 * and lower 2 bytes from patch will be used.
> +	 */
> +	soc_ver = (le32_to_cpu(ver.soc_id) << 16) |
> +		       (le16_to_cpu(ver.rom_ver) & 0x0000ffff);
> +

Can we at least do the leN_to_cpu conversions in qca_read_soc_version()
as previously to make this less clunky?

And/or define a macro to extract 'soc_ver' to unclunkify this further.

> +	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
> +
>  	config.user_baud_rate = baudrate;
>  
>  	/* Download rampatch file */
> @@ -491,9 +494,15 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>  	if (firmware_name)
>  		snprintf(config.fwname, sizeof(config.fwname),
>  			 "qca/%s", firmware_name);
> -	else if (qca_is_wcn399x(soc_type))
> -		snprintf(config.fwname, sizeof(config.fwname),
> -			 "qca/crnv%02x.bin", rom_ver);
> +	else if (qca_is_wcn399x(soc_type)) {
> +		if (ver.soc_id == QCA_WCN3991_SOC_ID) {
> +			snprintf(config.fwname, sizeof(config.fwname),
> +				 "qca/crnv%02xu.bin", rom_ver);
> +		} else {
> +			snprintf(config.fwname, sizeof(config.fwname),
> +				 "qca/crnv%02x.bin", rom_ver);
> +		}
> +	}
>  	else if (soc_type == QCA_QCA6390)
>  		snprintf(config.fwname, sizeof(config.fwname),
>  			 "qca/htnv%02x.bin", rom_ver);
> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
> index d81b74c..d01a9f5 100644
> --- a/drivers/bluetooth/btqca.h
> +++ b/drivers/bluetooth/btqca.h
> @@ -34,6 +34,8 @@
>  #define QCA_HCI_CC_OPCODE		0xFC00
>  #define QCA_HCI_CC_SUCCESS		0x00
>  
> +#define QCA_WCN3991_SOC_ID		(0x40014320)

The QCA_ prefix seems a bit verbose, given that this is a QCA driver and
WCN3991 uniquely identifies the chip. Having the prefix just needlessly
clutters conditions, I suggest to just call it SOC_ID_WCN3991.
Venkata Lakshmi Narayana Gubba Nov. 19, 2020, 12:50 p.m. UTC | #3
Hi Matthias,

On 2020-09-16 23:32, Matthias Kaehlcke wrote:
> Hi Venkata,
> 
> I agree with Marcel that the version magic is confusing ...
> 
> On Tue, Sep 15, 2020 at 09:13:25PM +0530, Venkata Lakshmi Narayana 
> Gubba wrote:
>> This change will allow to use different NVM file based
>> on WCN3991 BT SoC ID.Need to use different NVM file based on
>> fab location for WCN3991 BT SoC.
>> 
>> Signed-off-by: Venkata Lakshmi Narayana Gubba 
>> <gubbaven@codeaurora.org>
>> ---
>>  drivers/bluetooth/btqca.c   | 41 
>> +++++++++++++++++++++++++----------------
>>  drivers/bluetooth/btqca.h   | 13 ++++++++-----
>>  drivers/bluetooth/hci_qca.c | 11 +++++------
>>  3 files changed, 38 insertions(+), 27 deletions(-)
>> 
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index ce9dcff..a7e72f1 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -14,12 +14,11 @@
>> 
>>  #define VERSION "0.1"
>> 
>> -int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> +int qca_read_soc_version(struct hci_dev *hdev, struct 
>> qca_btsoc_version *ver,
>>  			 enum qca_btsoc_type soc_type)
>>  {
>>  	struct sk_buff *skb;
>>  	struct edl_event_hdr *edl;
>> -	struct qca_btsoc_version *ver;
>>  	char cmd;
>>  	int err = 0;
>>  	u8 event_type = HCI_EV_VENDOR;
>> @@ -70,9 +69,9 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 
>> *soc_version,
>>  	}
>> 
>>  	if (soc_type >= QCA_WCN3991)
>> -		memmove(&edl->data, &edl->data[1], sizeof(*ver));
>> -
>> -	ver = (struct qca_btsoc_version *)(edl->data);
>> +		memcpy(ver, &edl->data[1], sizeof(*ver));
>> +	else
>> +		memcpy(ver, &edl->data, sizeof(*ver));
>> 
>>  	bt_dev_info(hdev, "QCA Product ID   :0x%08x",
>>  		    le32_to_cpu(ver->product_id));
>> @@ -83,13 +82,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 
>> *soc_version,
>>  	bt_dev_info(hdev, "QCA Patch Version:0x%08x",
>>  		    le16_to_cpu(ver->patch_ver));
>> 
>> -	/* QCA chipset version can be decided by patch and SoC
>> -	 * version, combination with upper 2 bytes from SoC
>> -	 * and lower 2 bytes from patch will be used.
>> -	 */
>> -	*soc_version = (le32_to_cpu(ver->soc_id) << 16) |
>> -		       (le16_to_cpu(ver->rom_ver) & 0x0000ffff);
>> -	if (*soc_version == 0)
>> +	if (le32_to_cpu(ver->soc_id) == 0 || le16_to_cpu(ver->rom_ver) == 0)
>>  		err = -EILSEQ;
>> 
>>  out:
>> @@ -446,15 +439,25 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, 
>> const bdaddr_t *bdaddr)
>>  EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
>> 
>>  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> -		   enum qca_btsoc_type soc_type, u32 soc_ver,
>> +		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>>  		   const char *firmware_name)
>>  {
>>  	struct qca_fw_config config;
>>  	int err;
>>  	u8 rom_ver = 0;
>> +	u32 soc_ver;
>> 
>>  	bt_dev_dbg(hdev, "QCA setup on UART");
>> 
>> +	/* QCA chipset version can be decided by patch and SoC
>> +	 * version, combination with upper 2 bytes from SoC
>> +	 * and lower 2 bytes from patch will be used.
>> +	 */
>> +	soc_ver = (le32_to_cpu(ver.soc_id) << 16) |
>> +		       (le16_to_cpu(ver.rom_ver) & 0x0000ffff);
>> +
> 
> Can we at least do the leN_to_cpu conversions in qca_read_soc_version()
> as previously to make this less clunky?
> 
> And/or define a macro to extract 'soc_ver' to unclunkify this further.
> 
[Venkata]:
I will define a macro to extract soc_ver and will update in next 
patchset.
>> +	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
>> +
>>  	config.user_baud_rate = baudrate;
>> 
>>  	/* Download rampatch file */
>> @@ -491,9 +494,15 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t 
>> baudrate,
>>  	if (firmware_name)
>>  		snprintf(config.fwname, sizeof(config.fwname),
>>  			 "qca/%s", firmware_name);
>> -	else if (qca_is_wcn399x(soc_type))
>> -		snprintf(config.fwname, sizeof(config.fwname),
>> -			 "qca/crnv%02x.bin", rom_ver);
>> +	else if (qca_is_wcn399x(soc_type)) {
>> +		if (ver.soc_id == QCA_WCN3991_SOC_ID) {
>> +			snprintf(config.fwname, sizeof(config.fwname),
>> +				 "qca/crnv%02xu.bin", rom_ver);
>> +		} else {
>> +			snprintf(config.fwname, sizeof(config.fwname),
>> +				 "qca/crnv%02x.bin", rom_ver);
>> +		}
>> +	}
>>  	else if (soc_type == QCA_QCA6390)
>>  		snprintf(config.fwname, sizeof(config.fwname),
>>  			 "qca/htnv%02x.bin", rom_ver);
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index d81b74c..d01a9f5 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -34,6 +34,8 @@
>>  #define QCA_HCI_CC_OPCODE		0xFC00
>>  #define QCA_HCI_CC_SUCCESS		0x00
>> 
>> +#define QCA_WCN3991_SOC_ID		(0x40014320)
> 
> The QCA_ prefix seems a bit verbose, given that this is a QCA driver 
> and
> WCN3991 uniquely identifies the chip. Having the prefix just needlessly
> clutters conditions, I suggest to just call it SOC_ID_WCN3991.
Venkata Lakshmi Narayana Gubba Nov. 19, 2020, 12:52 p.m. UTC | #4
Hi Marcel,
On 2020-09-16 19:57, Marcel Holtmann wrote:
> Hi Venkata,
> 
>> This change will allow to use different NVM file based
>> on WCN3991 BT SoC ID.Need to use different NVM file based on
>> fab location for WCN3991 BT SoC.
>> 
>> Signed-off-by: Venkata Lakshmi Narayana Gubba 
>> <gubbaven@codeaurora.org>
>> ---
>> drivers/bluetooth/btqca.c   | 41 
>> +++++++++++++++++++++++++----------------
>> drivers/bluetooth/btqca.h   | 13 ++++++++-----
>> drivers/bluetooth/hci_qca.c | 11 +++++------
>> 3 files changed, 38 insertions(+), 27 deletions(-)
>> 
>> diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
>> index ce9dcff..a7e72f1 100644
>> --- a/drivers/bluetooth/btqca.c
>> +++ b/drivers/bluetooth/btqca.c
>> @@ -14,12 +14,11 @@
>> 
>> #define VERSION "0.1"
>> 
>> -int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> +int qca_read_soc_version(struct hci_dev *hdev, struct 
>> qca_btsoc_version *ver,
>> 			 enum qca_btsoc_type soc_type)
>> {
>> 	struct sk_buff *skb;
>> 	struct edl_event_hdr *edl;
>> -	struct qca_btsoc_version *ver;
>> 	char cmd;
>> 	int err = 0;
>> 	u8 event_type = HCI_EV_VENDOR;
>> @@ -70,9 +69,9 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 
>> *soc_version,
>> 	}
>> 
>> 	if (soc_type >= QCA_WCN3991)
>> -		memmove(&edl->data, &edl->data[1], sizeof(*ver));
>> -
>> -	ver = (struct qca_btsoc_version *)(edl->data);
>> +		memcpy(ver, &edl->data[1], sizeof(*ver));
> 
> any reason to use &edl->data[1] and not just edl->data + 1?
[Venkata]:
I will use edl->data + 1 and will update in next patchset.
> 
>> +	else
>> +		memcpy(ver, &edl->data, sizeof(*ver));
>> 
>> 	bt_dev_info(hdev, "QCA Product ID   :0x%08x",
>> 		    le32_to_cpu(ver->product_id));
>> @@ -83,13 +82,7 @@ int qca_read_soc_version(struct hci_dev *hdev, u32 
>> *soc_version,
>> 	bt_dev_info(hdev, "QCA Patch Version:0x%08x",
>> 		    le16_to_cpu(ver->patch_ver));
>> 
>> -	/* QCA chipset version can be decided by patch and SoC
>> -	 * version, combination with upper 2 bytes from SoC
>> -	 * and lower 2 bytes from patch will be used.
>> -	 */
>> -	*soc_version = (le32_to_cpu(ver->soc_id) << 16) |
>> -		       (le16_to_cpu(ver->rom_ver) & 0x0000ffff);
>> -	if (*soc_version == 0)
>> +	if (le32_to_cpu(ver->soc_id) == 0 || le16_to_cpu(ver->rom_ver) == 0)
>> 		err = -EILSEQ;
>> 
>> out:
>> @@ -446,15 +439,25 @@ int qca_set_bdaddr_rome(struct hci_dev *hdev, 
>> const bdaddr_t *bdaddr)
>> EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
>> 
>> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> -		   enum qca_btsoc_type soc_type, u32 soc_ver,
>> +		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>> 		   const char *firmware_name)
>> {
>> 	struct qca_fw_config config;
>> 	int err;
>> 	u8 rom_ver = 0;
>> +	u32 soc_ver;
>> 
>> 	bt_dev_dbg(hdev, "QCA setup on UART");
>> 
>> +	/* QCA chipset version can be decided by patch and SoC
>> +	 * version, combination with upper 2 bytes from SoC
>> +	 * and lower 2 bytes from patch will be used.
>> +	 */
>> +	soc_ver = (le32_to_cpu(ver.soc_id) << 16) |
>> +		       (le16_to_cpu(ver.rom_ver) & 0x0000ffff);
> 
> Please indent this properly.
> 
[Venkat]:
Sure.I will update in next patchset.
> I am also confused about the 0x0000ffff since it is just 16-bit value
> in the first place. Also where do you want to shift the 32-bit value
> to.
> 
> Frankly, I find all this version magic kinda questionable.
> 
>> +
>> +	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
>> +
>> 	config.user_baud_rate = baudrate;
>> 
>> 	/* Download rampatch file */
>> @@ -491,9 +494,15 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t 
>> baudrate,
>> 	if (firmware_name)
>> 		snprintf(config.fwname, sizeof(config.fwname),
>> 			 "qca/%s", firmware_name);
>> -	else if (qca_is_wcn399x(soc_type))
>> -		snprintf(config.fwname, sizeof(config.fwname),
>> -			 "qca/crnv%02x.bin", rom_ver);
>> +	else if (qca_is_wcn399x(soc_type)) {
>> +		if (ver.soc_id == QCA_WCN3991_SOC_ID) {
>> +			snprintf(config.fwname, sizeof(config.fwname),
>> +				 "qca/crnv%02xu.bin", rom_ver);
>> +		} else {
>> +			snprintf(config.fwname, sizeof(config.fwname),
>> +				 "qca/crnv%02x.bin", rom_ver);
>> +		}
>> +	}
>> 	else if (soc_type == QCA_QCA6390)
>> 		snprintf(config.fwname, sizeof(config.fwname),
>> 			 "qca/htnv%02x.bin", rom_ver);
>> diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
>> index d81b74c..d01a9f5 100644
>> --- a/drivers/bluetooth/btqca.h
>> +++ b/drivers/bluetooth/btqca.h
>> @@ -34,6 +34,8 @@
>> #define QCA_HCI_CC_OPCODE		0xFC00
>> #define QCA_HCI_CC_SUCCESS		0x00
>> 
>> +#define QCA_WCN3991_SOC_ID		(0x40014320)
>> +
>> enum qca_baudrate {
>> 	QCA_BAUDRATE_115200 	= 0,
>> 	QCA_BAUDRATE_57600,
>> @@ -136,9 +138,9 @@ enum qca_btsoc_type {
>> 
>> int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>> int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
>> -		   enum qca_btsoc_type soc_type, u32 soc_ver,
>> +		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>> 		   const char *firmware_name);
>> -int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
>> +int qca_read_soc_version(struct hci_dev *hdev, struct 
>> qca_btsoc_version *ver,
>> 			 enum qca_btsoc_type);
>> int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
>> int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
>> @@ -155,13 +157,14 @@ static inline int qca_set_bdaddr_rome(struct 
>> hci_dev *hdev, const bdaddr_t *bdad
>> }
>> 
>> static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t 
>> baudrate,
>> -				 enum qca_btsoc_type soc_type, u32 soc_ver,
>> -				 const char *firmware_name)
>> +		enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
>> +				const char *firmware_name)
> 
> Please use proper indentation.
> 
[Venkat]:
Sure.I will update in next patchset.
>> {
>> 	return -EOPNOTSUPP;
>> }
>> 
>> -static inline int qca_read_soc_version(struct hci_dev *hdev, u32 
>> *soc_version,
>> +static inline int qca_read_soc_version(struct hci_dev *hdev,
>> +				       struct qca_btsoc_version *ver,
>> 				       enum qca_btsoc_type)
>> {
>> 	return -EOPNOTSUPP;
>> diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
>> index 244b8fe..4c32c60 100644
>> --- a/drivers/bluetooth/hci_qca.c
>> +++ b/drivers/bluetooth/hci_qca.c
>> @@ -1649,7 +1649,7 @@ static int qca_setup(struct hci_uart *hu)
>> 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
>> 	const char *firmware_name = qca_get_firmware_name(hu);
>> 	int ret;
>> -	int soc_ver = 0;
>> +	struct qca_btsoc_version ver;
>> 
>> 	ret = qca_check_speeds(hu);
>> 	if (ret)
>> @@ -1678,7 +1678,7 @@ static int qca_setup(struct hci_uart *hu)
>> 	if (qca_is_wcn399x(soc_type)) {
>> 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
>> 
>> -		ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
>> +		ret = qca_read_soc_version(hdev, &ver, soc_type);
>> 		if (ret)
>> 			return ret;
>> 	} else {
>> @@ -1697,15 +1697,14 @@ static int qca_setup(struct hci_uart *hu)
>> 
>> 	if (!qca_is_wcn399x(soc_type)) {
>> 		/* Get QCA version information */
>> -		ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
>> +		ret = qca_read_soc_version(hdev, &ver, soc_type);
>> 		if (ret)
>> 			return ret;
>> 	}
>> 
>> -	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
>> 	/* Setup patch / NVM configurations */
>> -	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
>> -			firmware_name);
>> +	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, ver,
>> +			     firmware_name);
>> 	if (!ret) {
>> 		set_bit(QCA_IBS_ENABLED, &qca->flags);
>> 		qca_debugfs_init(hdev);
> 
> Regards
> 
> Marcel
diff mbox series

Patch

diff --git a/drivers/bluetooth/btqca.c b/drivers/bluetooth/btqca.c
index ce9dcff..a7e72f1 100644
--- a/drivers/bluetooth/btqca.c
+++ b/drivers/bluetooth/btqca.c
@@ -14,12 +14,11 @@ 
 
 #define VERSION "0.1"
 
-int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
+int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
 			 enum qca_btsoc_type soc_type)
 {
 	struct sk_buff *skb;
 	struct edl_event_hdr *edl;
-	struct qca_btsoc_version *ver;
 	char cmd;
 	int err = 0;
 	u8 event_type = HCI_EV_VENDOR;
@@ -70,9 +69,9 @@  int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
 	}
 
 	if (soc_type >= QCA_WCN3991)
-		memmove(&edl->data, &edl->data[1], sizeof(*ver));
-
-	ver = (struct qca_btsoc_version *)(edl->data);
+		memcpy(ver, &edl->data[1], sizeof(*ver));
+	else
+		memcpy(ver, &edl->data, sizeof(*ver));
 
 	bt_dev_info(hdev, "QCA Product ID   :0x%08x",
 		    le32_to_cpu(ver->product_id));
@@ -83,13 +82,7 @@  int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
 	bt_dev_info(hdev, "QCA Patch Version:0x%08x",
 		    le16_to_cpu(ver->patch_ver));
 
-	/* QCA chipset version can be decided by patch and SoC
-	 * version, combination with upper 2 bytes from SoC
-	 * and lower 2 bytes from patch will be used.
-	 */
-	*soc_version = (le32_to_cpu(ver->soc_id) << 16) |
-		       (le16_to_cpu(ver->rom_ver) & 0x0000ffff);
-	if (*soc_version == 0)
+	if (le32_to_cpu(ver->soc_id) == 0 || le16_to_cpu(ver->rom_ver) == 0)
 		err = -EILSEQ;
 
 out:
@@ -446,15 +439,25 @@  int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 EXPORT_SYMBOL_GPL(qca_set_bdaddr_rome);
 
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
-		   enum qca_btsoc_type soc_type, u32 soc_ver,
+		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
 		   const char *firmware_name)
 {
 	struct qca_fw_config config;
 	int err;
 	u8 rom_ver = 0;
+	u32 soc_ver;
 
 	bt_dev_dbg(hdev, "QCA setup on UART");
 
+	/* QCA chipset version can be decided by patch and SoC
+	 * version, combination with upper 2 bytes from SoC
+	 * and lower 2 bytes from patch will be used.
+	 */
+	soc_ver = (le32_to_cpu(ver.soc_id) << 16) |
+		       (le16_to_cpu(ver.rom_ver) & 0x0000ffff);
+
+	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
+
 	config.user_baud_rate = baudrate;
 
 	/* Download rampatch file */
@@ -491,9 +494,15 @@  int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 	if (firmware_name)
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/%s", firmware_name);
-	else if (qca_is_wcn399x(soc_type))
-		snprintf(config.fwname, sizeof(config.fwname),
-			 "qca/crnv%02x.bin", rom_ver);
+	else if (qca_is_wcn399x(soc_type)) {
+		if (ver.soc_id == QCA_WCN3991_SOC_ID) {
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/crnv%02xu.bin", rom_ver);
+		} else {
+			snprintf(config.fwname, sizeof(config.fwname),
+				 "qca/crnv%02x.bin", rom_ver);
+		}
+	}
 	else if (soc_type == QCA_QCA6390)
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/htnv%02x.bin", rom_ver);
diff --git a/drivers/bluetooth/btqca.h b/drivers/bluetooth/btqca.h
index d81b74c..d01a9f5 100644
--- a/drivers/bluetooth/btqca.h
+++ b/drivers/bluetooth/btqca.h
@@ -34,6 +34,8 @@ 
 #define QCA_HCI_CC_OPCODE		0xFC00
 #define QCA_HCI_CC_SUCCESS		0x00
 
+#define QCA_WCN3991_SOC_ID		(0x40014320)
+
 enum qca_baudrate {
 	QCA_BAUDRATE_115200 	= 0,
 	QCA_BAUDRATE_57600,
@@ -136,9 +138,9 @@  enum qca_btsoc_type {
 
 int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
-		   enum qca_btsoc_type soc_type, u32 soc_ver,
+		   enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
 		   const char *firmware_name);
-int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
+int qca_read_soc_version(struct hci_dev *hdev, struct qca_btsoc_version *ver,
 			 enum qca_btsoc_type);
 int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
 int qca_send_pre_shutdown_cmd(struct hci_dev *hdev);
@@ -155,13 +157,14 @@  static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdad
 }
 
 static inline int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
-				 enum qca_btsoc_type soc_type, u32 soc_ver,
-				 const char *firmware_name)
+		enum qca_btsoc_type soc_type, struct qca_btsoc_version ver,
+				const char *firmware_name)
 {
 	return -EOPNOTSUPP;
 }
 
-static inline int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version,
+static inline int qca_read_soc_version(struct hci_dev *hdev,
+				       struct qca_btsoc_version *ver,
 				       enum qca_btsoc_type)
 {
 	return -EOPNOTSUPP;
diff --git a/drivers/bluetooth/hci_qca.c b/drivers/bluetooth/hci_qca.c
index 244b8fe..4c32c60 100644
--- a/drivers/bluetooth/hci_qca.c
+++ b/drivers/bluetooth/hci_qca.c
@@ -1649,7 +1649,7 @@  static int qca_setup(struct hci_uart *hu)
 	enum qca_btsoc_type soc_type = qca_soc_type(hu);
 	const char *firmware_name = qca_get_firmware_name(hu);
 	int ret;
-	int soc_ver = 0;
+	struct qca_btsoc_version ver;
 
 	ret = qca_check_speeds(hu);
 	if (ret)
@@ -1678,7 +1678,7 @@  static int qca_setup(struct hci_uart *hu)
 	if (qca_is_wcn399x(soc_type)) {
 		set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
 
-		ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
+		ret = qca_read_soc_version(hdev, &ver, soc_type);
 		if (ret)
 			return ret;
 	} else {
@@ -1697,15 +1697,14 @@  static int qca_setup(struct hci_uart *hu)
 
 	if (!qca_is_wcn399x(soc_type)) {
 		/* Get QCA version information */
-		ret = qca_read_soc_version(hdev, &soc_ver, soc_type);
+		ret = qca_read_soc_version(hdev, &ver, soc_type);
 		if (ret)
 			return ret;
 	}
 
-	bt_dev_info(hdev, "QCA controller version 0x%08x", soc_ver);
 	/* Setup patch / NVM configurations */
-	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, soc_ver,
-			firmware_name);
+	ret = qca_uart_setup(hdev, qca_baudrate, soc_type, ver,
+			     firmware_name);
 	if (!ret) {
 		set_bit(QCA_IBS_ENABLED, &qca->flags);
 		qca_debugfs_init(hdev);