diff mbox series

[v4,4/5] arm64: dts: qcom: sc7180: Use pdc interrupts for USB instead of GIC interrupts

Message ID 1603831083-2025-5-git-send-email-sanm@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series USB DWC3 host wake up support from system suspend | expand

Commit Message

Sandeep Maheswaram Oct. 27, 2020, 8:38 p.m. UTC
Using pdc interrupts for USB instead of GIC interrupts to
support wake up in case of XO shutdown.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Doug Anderson Feb. 25, 2021, 6:15 p.m. UTC | #1
Hi,

On Tue, Oct 27, 2020 at 1:38 PM Sandeep Maheswaram <sanm@codeaurora.org> wrote:
>
> Using pdc interrupts for USB instead of GIC interrupts to
> support wake up in case of XO shutdown.
>
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index a02776c..a2c56528 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -2687,10 +2687,10 @@
>                                           <&gcc GCC_USB30_PRIM_MASTER_CLK>;
>                         assigned-clock-rates = <19200000>, <150000000>;
>
> -                       interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> -                                    <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
> -                                    <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
> -                                    <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
> +                       interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
> +                                             <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
> +                                             <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
> +                                             <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;

Is there any reason that this patch can't land?  I'm not sure what the
current status of everything is, but it should be fine to go through
the PDC anyway, right?

-Doug
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index a02776c..a2c56528 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2687,10 +2687,10 @@ 
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <150000000>;
 
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts-extended = <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 6 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 8 IRQ_TYPE_LEVEL_HIGH>,
+					      <&pdc 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "hs_phy_irq", "ss_phy_irq",
 					  "dm_hs_phy_irq", "dp_hs_phy_irq";