@@ -8,6 +8,7 @@
* Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org>
*/
+#include <linux/aer.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/mhi.h>
@@ -403,6 +404,8 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
pci_save_state(pdev);
mhi_pdev->pci_state = pci_store_saved_state(pdev);
+ pci_enable_pcie_error_reporting(pdev);
+
err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config);
if (err)
return err;
@@ -499,7 +502,54 @@ static void mhi_pci_reset_done(struct pci_dev *pdev)
set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
}
+static pci_ers_result_t mhi_pci_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
+ struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+ dev_err(&pdev->dev, "PCI error detected, state = %u\n", state);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ /* Clean up MHI state */
+ if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
+ mhi_power_down(mhi_cntrl, false);
+ mhi_unprepare_after_power_down(mhi_cntrl);
+ } else {
+ /* Nothing to do */
+ return PCI_ERS_RESULT_RECOVERED;
+ }
+
+ pci_disable_device(pdev);
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t mhi_pci_slot_reset(struct pci_dev *pdev)
+{
+ if (pci_enable_device(pdev)) {
+ dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void mhi_pci_io_resume(struct pci_dev *pdev)
+{
+ struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
+
+ dev_err(&pdev->dev, "PCI slot reset done\n");
+
+ queue_work(system_long_wq, &mhi_pdev->recovery_work);
+}
+
static const struct pci_error_handlers mhi_pci_err_handler = {
+ .error_detected = mhi_pci_error_detected,
+ .slot_reset = mhi_pci_slot_reset,
+ .resume = mhi_pci_io_resume,
.reset_prepare = mhi_pci_reset_prepare,
.reset_done = mhi_pci_reset_done,
};
In AER capable root complex, errors are reported to the host which can then act accordingly and perform PCI recovering procedure. This patch enables error reporting and implements error_detected, slot_reset and resume callbacks. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by Hemant Kumar <hemantk@codeaurora.org> --- drivers/bus/mhi/pci_generic.c | 50 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 50 insertions(+)