diff mbox series

[v2,3/3] bus: mhi: core: Process execution environment changes serially

Message ID 1610651795-31287-4-git-send-email-bbhatt@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Serialize execution environment changes for MHI | expand

Commit Message

Bhaumik Bhatt Jan. 14, 2021, 7:16 p.m. UTC 
In current design, whenever the BHI interrupt is fired, the execution
environment is updated. This can cause race conditions and impede any
ongoing power up/down processing. For example, if a power down is in
progress and the host has updated the execution environment to a
local "disabled" state, any BHI interrupt firing later could replace
it with the value from the BHI EE register. Another example would be
that the device can enter mission mode while device creation for SBL
is still going on, leading to multiple attempts at opening the same
channel.

Ensure that EE changes are handled only from appropriate places and
occur one after another and handle only PBL or RDDM EE changes as
critical events directly from the interrupt handler. This also makes
sure that we use the correct execution environment to notify the
controller driver when the device resets to one of the PBL execution
environments.

Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org>
---
 drivers/bus/mhi/core/main.c | 14 ++++++++------
 drivers/bus/mhi/core/pm.c   |  5 +++--
 2 files changed, 11 insertions(+), 8 deletions(-)

Comments

Hemant Kumar Jan. 15, 2021, 7:02 p.m. UTC | #1 
On 1/14/21 11:16 AM, Bhaumik Bhatt wrote:
> In current design, whenever the BHI interrupt is fired, the execution
> environment is updated. This can cause race conditions and impede any
> ongoing power up/down processing. For example, if a power down is in
> progress and the host has updated the execution environment to a
> local "disabled" state, any BHI interrupt firing later could replace
> it with the value from the BHI EE register.
Can we add what is the real issue observed when mhi_cntrl->ee changed in 
above scenario?
  Another example would be
> that the device can enter mission mode while device creation for SBL
> is still going on, leading to multiple attempts at opening the same
> channel.
Even for this scenario, can we add the real issue that was observed e.g. 
same device was attempting to get created twice and caused xyz issue?
> 
> Ensure that EE changes are handled only from appropriate places and
> occur one after another and handle only PBL or RDDM EE changes as
> critical events directly from the interrupt handler. This also makes
> sure that we use the correct execution environment to notify the
> controller driver when the device resets to one of the PBL execution
> environments.
> 
[..]

Thanks,
Hemant
diff mbox series

Patch

diff --git a/drivers/bus/mhi/core/main.c b/drivers/bus/mhi/core/main.c
index 1a7192e..2929e9f 100644
--- a/drivers/bus/mhi/core/main.c
+++ b/drivers/bus/mhi/core/main.c
@@ -411,7 +411,7 @@  irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
 	enum mhi_state state = MHI_STATE_MAX;
 	enum mhi_pm_state pm_state = 0;
-	enum mhi_ee_type ee = 0;
+	enum mhi_ee_type ee = MHI_EE_MAX;
 
 	write_lock_irq(&mhi_cntrl->pm_lock);
 	if (!MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state)) {
@@ -420,8 +420,7 @@  irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 	}
 
 	state = mhi_get_mhi_state(mhi_cntrl);
-	ee = mhi_cntrl->ee;
-	mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+	ee = mhi_get_exec_env(mhi_cntrl);
 	dev_dbg(dev, "local ee:%s device ee:%s dev_state:%s\n",
 		TO_MHI_EXEC_STR(mhi_cntrl->ee), TO_MHI_EXEC_STR(ee),
 		TO_MHI_STATE_STR(state));
@@ -439,8 +438,9 @@  irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 		if (!mhi_is_active(mhi_cntrl))
 			goto exit_intvec;
 
-		if (mhi_cntrl->ee == MHI_EE_RDDM && mhi_cntrl->ee != ee) {
+		if (ee == MHI_EE_RDDM && mhi_cntrl->ee != MHI_EE_RDDM) {
 			mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_EE_RDDM);
+			mhi_cntrl->ee = ee;
 			wake_up_all(&mhi_cntrl->state_event);
 		}
 		goto exit_intvec;
@@ -450,10 +450,12 @@  irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
 		wake_up_all(&mhi_cntrl->state_event);
 
 		/* For fatal errors, we let controller decide next step */
-		if (MHI_IN_PBL(ee))
+		if (MHI_IN_PBL(ee)) {
 			mhi_cntrl->status_cb(mhi_cntrl, MHI_CB_FATAL_ERROR);
-		else
+			mhi_cntrl->ee = ee;
+		} else {
 			mhi_pm_sys_err_handler(mhi_cntrl);
+		}
 	}
 
 exit_intvec:
diff --git a/drivers/bus/mhi/core/pm.c b/drivers/bus/mhi/core/pm.c
index 44aa7eb..c870fa8 100644
--- a/drivers/bus/mhi/core/pm.c
+++ b/drivers/bus/mhi/core/pm.c
@@ -384,14 +384,15 @@  static int mhi_pm_mission_mode_transition(struct mhi_controller *mhi_cntrl)
 
 	write_lock_irq(&mhi_cntrl->pm_lock);
 	if (MHI_REG_ACCESS_VALID(mhi_cntrl->pm_state))
-		mhi_cntrl->ee = mhi_get_exec_env(mhi_cntrl);
+		ee = mhi_get_exec_env(mhi_cntrl);
 
-	if (!MHI_IN_MISSION_MODE(mhi_cntrl->ee)) {
+	if (!MHI_IN_MISSION_MODE(ee)) {
 		mhi_cntrl->pm_state = MHI_PM_LD_ERR_FATAL_DETECT;
 		write_unlock_irq(&mhi_cntrl->pm_lock);
 		wake_up_all(&mhi_cntrl->state_event);
 		return -EIO;
 	}
+	mhi_cntrl->ee = ee;
 	write_unlock_irq(&mhi_cntrl->pm_lock);
 
 	wake_up_all(&mhi_cntrl->state_event);