diff mbox series

[1/3] input: pm8941-pwrkey: add support for PMK8350 PON_HLOS PMIC peripheral

Message ID 1614922721-1390-2-git-send-email-skakit@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Add support for PMK8350 PON_HLOS PMIC peripheral | expand

Commit Message

Satya Priya March 5, 2021, 5:38 a.m. UTC
From: David Collins <collinsd@codeaurora.org>

On Qualcomm Technologies, Inc. PMIC PMK8350, the PON peripheral
is split into two peripherals: PON_HLOS and PON_PBS.  The
application processor only has write access to PON_HLOS which
limits it to only receiving PON interrupts.

Add support for the PMK8350 PON_HLOS peripheral so that its
KPDPWR_N and RESIN_N interrupts can be used to detect key
presses.

Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
---
 drivers/input/misc/pm8941-pwrkey.c | 103 ++++++++++++++++++++++++++-----------
 1 file changed, 72 insertions(+), 31 deletions(-)

Comments

Satya Priya April 7, 2021, 3:29 p.m. UTC | #1
Gentle Reminder!

Thanks,
Satya Priya
On 2021-03-05 11:08, satya priya wrote:
> From: David Collins <collinsd@codeaurora.org>
> 
> On Qualcomm Technologies, Inc. PMIC PMK8350, the PON peripheral
> is split into two peripherals: PON_HLOS and PON_PBS.  The
> application processor only has write access to PON_HLOS which
> limits it to only receiving PON interrupts.
> 
> Add support for the PMK8350 PON_HLOS peripheral so that its
> KPDPWR_N and RESIN_N interrupts can be used to detect key
> presses.
> 
> Signed-off-by: David Collins <collinsd@codeaurora.org>
> Signed-off-by: satya priya <skakit@codeaurora.org>
> ---
>  drivers/input/misc/pm8941-pwrkey.c | 103 
> ++++++++++++++++++++++++++-----------
>  1 file changed, 72 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/input/misc/pm8941-pwrkey.c
> b/drivers/input/misc/pm8941-pwrkey.c
> index cf81044..2044d187 100644
> --- a/drivers/input/misc/pm8941-pwrkey.c
> +++ b/drivers/input/misc/pm8941-pwrkey.c
Dmitry Torokhov April 8, 2021, 6:24 a.m. UTC | #2
Hi Satya,

On Wed, Apr 07, 2021 at 08:59:39PM +0530, skakit@codeaurora.org wrote:
> Gentle Reminder!

Sorry, please address Rob's comments on the bindings, the driver code
looks OK to me.

Thanks.
diff mbox series

Patch

diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index cf81044..2044d187 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -1,6 +1,6 @@ 
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved.
+ * Copyright (c) 2010-2011, 2020, The Linux Foundation. All rights reserved.
  * Copyright (c) 2014, Sony Mobile Communications Inc.
  */
 
@@ -22,6 +22,8 @@ 
 #define PON_RT_STS			0x10
 #define  PON_KPDPWR_N_SET		BIT(0)
 #define  PON_RESIN_N_SET		BIT(1)
+#define  PON_GEN3_RESIN_N_SET		BIT(6)
+#define  PON_GEN3_KPDPWR_N_SET		BIT(7)
 
 #define PON_PS_HOLD_RST_CTL		0x5a
 #define PON_PS_HOLD_RST_CTL2		0x5b
@@ -38,8 +40,12 @@ 
 #define  PON_DBC_DELAY_MASK		0x7
 
 struct pm8941_data {
-	unsigned int pull_up_bit;
-	unsigned int status_bit;
+	unsigned int	pull_up_bit;
+	unsigned int	status_bit;
+	bool		supports_ps_hold_poff_config;
+	bool		supports_debounce_config;
+	const char	*name;
+	const char	*phys;
 };
 
 struct pm8941_pwrkey {
@@ -231,34 +237,40 @@  static int pm8941_pwrkey_probe(struct platform_device *pdev)
 
 	input_set_capability(pwrkey->input, EV_KEY, pwrkey->code);
 
-	pwrkey->input->name = "pm8941_pwrkey";
-	pwrkey->input->phys = "pm8941_pwrkey/input0";
-
-	req_delay = (req_delay << 6) / USEC_PER_SEC;
-	req_delay = ilog2(req_delay);
-
-	error = regmap_update_bits(pwrkey->regmap,
-				   pwrkey->baseaddr + PON_DBC_CTL,
-				   PON_DBC_DELAY_MASK,
-				   req_delay);
-	if (error) {
-		dev_err(&pdev->dev, "failed to set debounce: %d\n", error);
-		return error;
+	pwrkey->input->name = pwrkey->data->name;
+	pwrkey->input->phys = pwrkey->data->phys;
+
+	if (pwrkey->data->supports_debounce_config) {
+		req_delay = (req_delay << 6) / USEC_PER_SEC;
+		req_delay = ilog2(req_delay);
+
+		error = regmap_update_bits(pwrkey->regmap,
+					   pwrkey->baseaddr + PON_DBC_CTL,
+					   PON_DBC_DELAY_MASK,
+					   req_delay);
+		if (error) {
+			dev_err(&pdev->dev, "failed to set debounce: %d\n",
+				error);
+			return error;
+		}
 	}
 
-	error = regmap_update_bits(pwrkey->regmap,
-				   pwrkey->baseaddr + PON_PULL_CTL,
-				   pwrkey->data->pull_up_bit,
-				   pull_up ? pwrkey->data->pull_up_bit : 0);
-	if (error) {
-		dev_err(&pdev->dev, "failed to set pull: %d\n", error);
-		return error;
+	if (pwrkey->data->pull_up_bit) {
+		error = regmap_update_bits(pwrkey->regmap,
+					   pwrkey->baseaddr + PON_PULL_CTL,
+					   pwrkey->data->pull_up_bit,
+					   pull_up ? pwrkey->data->pull_up_bit :
+						     0);
+		if (error) {
+			dev_err(&pdev->dev, "failed to set pull: %d\n", error);
+			return error;
+		}
 	}
 
 	error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq,
 					  NULL, pm8941_pwrkey_irq,
 					  IRQF_ONESHOT,
-					  "pm8941_pwrkey", pwrkey);
+					  pwrkey->data->name, pwrkey);
 	if (error) {
 		dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error);
 		return error;
@@ -271,12 +283,14 @@  static int pm8941_pwrkey_probe(struct platform_device *pdev)
 		return error;
 	}
 
-	pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify,
-	error = register_reboot_notifier(&pwrkey->reboot_notifier);
-	if (error) {
-		dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
-			error);
-		return error;
+	if (pwrkey->data->supports_ps_hold_poff_config) {
+		pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify,
+		error = register_reboot_notifier(&pwrkey->reboot_notifier);
+		if (error) {
+			dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
+				error);
+			return error;
+		}
 	}
 
 	platform_set_drvdata(pdev, pwrkey);
@@ -289,7 +303,8 @@  static int pm8941_pwrkey_remove(struct platform_device *pdev)
 {
 	struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev);
 
-	unregister_reboot_notifier(&pwrkey->reboot_notifier);
+	if (pwrkey->data->supports_ps_hold_poff_config)
+		unregister_reboot_notifier(&pwrkey->reboot_notifier);
 
 	return 0;
 }
@@ -297,16 +312,42 @@  static int pm8941_pwrkey_remove(struct platform_device *pdev)
 static const struct pm8941_data pwrkey_data = {
 	.pull_up_bit = PON_KPDPWR_PULL_UP,
 	.status_bit = PON_KPDPWR_N_SET,
+	.name = "pm8941_pwrkey",
+	.phys = "pm8941_pwrkey/input0",
+	.supports_ps_hold_poff_config = true,
+	.supports_debounce_config = true,
 };
 
 static const struct pm8941_data resin_data = {
 	.pull_up_bit = PON_RESIN_PULL_UP,
 	.status_bit = PON_RESIN_N_SET,
+	.name = "pm8941_resin",
+	.phys = "pm8941_resin/input0",
+	.supports_ps_hold_poff_config = true,
+	.supports_debounce_config = true,
+};
+
+static const struct pm8941_data pon_gen3_pwrkey_data = {
+	.status_bit = PON_GEN3_KPDPWR_N_SET,
+	.name = "pmic_pwrkey",
+	.phys = "pmic_pwrkey/input0",
+	.supports_ps_hold_poff_config = false,
+	.supports_debounce_config = false,
+};
+
+static const struct pm8941_data pon_gen3_resin_data = {
+	.status_bit = PON_GEN3_RESIN_N_SET,
+	.name = "pmic_resin",
+	.phys = "pmic_resin/input0",
+	.supports_ps_hold_poff_config = false,
+	.supports_debounce_config = false,
 };
 
 static const struct of_device_id pm8941_pwr_key_id_table[] = {
 	{ .compatible = "qcom,pm8941-pwrkey", .data = &pwrkey_data },
 	{ .compatible = "qcom,pm8941-resin", .data = &resin_data },
+	{ .compatible = "qcom,pmk8350-pwrkey", .data = &pon_gen3_pwrkey_data },
+	{ .compatible = "qcom,pmk8350-resin", .data = &pon_gen3_resin_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table);