diff mbox series

[v15,3/4] dt-bindings: msm: dsi: add yaml schemas for DSI PHY bindings

Message ID 1617620770-26202-3-git-send-email-mkrishn@codeaurora.org (mailing list archive)
State New
Headers show
Series [v15,1/4] dt-bindings: msm: disp: add yaml schemas for DPU bindings | expand

Commit Message

Krishna Manikandan April 5, 2021, 11:06 a.m. UTC
Add YAML schema for the device tree bindings for DSI PHY.

Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>

Changes in v1:
   - Merge dsi-phy.yaml and dsi-phy-10nm.yaml (Stephen Boyd)
   - Remove qcom,dsi-phy-regulator-ldo-mode (Stephen Boyd)
   - Add clock cells properly (Stephen Boyd)
   - Remove unnecessary decription from clock names (Stephen Boyd)
   - Add pin names for the supply entries for 10nm phy which is
     used in sc7180 and sdm845 (Stephen Boyd)
   - Remove unused header files from examples (Stephen Boyd)
   - Drop labels for display nodes and correct node name (Stephen Boyd)

Changes in v2:
   - Drop maxItems for clock (Stephen Boyd)
   - Add vdds supply pin information for sdm845 (Stephen Boyd)
   - Add examples for 14nm, 20nm and 28nm phy yaml files (Stephen Boyd)
   - Keep child nodes directly under soc node (Stephen Boyd)

Changes in v3:
   - Use a separate yaml file to describe the common properties
     for all the dsi phy versions (Stephen Boyd)
   - Remove soc from examples (Stephen Boyd)
   - Add description for register property

Changes in v4:
   - Modify the title for all the phy versions (Stephen Boyd)
   - Drop description for all the phy versions (Stephen Boyd)
   - Modify the description for register property (Stephen Boyd)

Changes in v5:
   - Remove unused properties from common dsi phy file
   - Add clock-cells and phy-cells to required property
     list (Stephen Boyd)
---
 .../bindings/display/msm/dsi-phy-10nm.yaml         | 68 +++++++++++++++++++++
 .../bindings/display/msm/dsi-phy-14nm.yaml         | 66 ++++++++++++++++++++
 .../bindings/display/msm/dsi-phy-20nm.yaml         | 71 ++++++++++++++++++++++
 .../bindings/display/msm/dsi-phy-28nm.yaml         | 68 +++++++++++++++++++++
 .../bindings/display/msm/dsi-phy-common.yaml       | 40 ++++++++++++
 5 files changed, 313 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
 create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml

Comments

Rob Herring April 6, 2021, 1:24 p.m. UTC | #1
On Mon, 05 Apr 2021 16:36:09 +0530, Krishna Manikandan wrote:
> Add YAML schema for the device tree bindings for DSI PHY.
> 
> Signed-off-by: Krishna Manikandan <mkrishn@codeaurora.org>
> 
> Changes in v1:
>    - Merge dsi-phy.yaml and dsi-phy-10nm.yaml (Stephen Boyd)
>    - Remove qcom,dsi-phy-regulator-ldo-mode (Stephen Boyd)
>    - Add clock cells properly (Stephen Boyd)
>    - Remove unnecessary decription from clock names (Stephen Boyd)
>    - Add pin names for the supply entries for 10nm phy which is
>      used in sc7180 and sdm845 (Stephen Boyd)
>    - Remove unused header files from examples (Stephen Boyd)
>    - Drop labels for display nodes and correct node name (Stephen Boyd)
> 
> Changes in v2:
>    - Drop maxItems for clock (Stephen Boyd)
>    - Add vdds supply pin information for sdm845 (Stephen Boyd)
>    - Add examples for 14nm, 20nm and 28nm phy yaml files (Stephen Boyd)
>    - Keep child nodes directly under soc node (Stephen Boyd)
> 
> Changes in v3:
>    - Use a separate yaml file to describe the common properties
>      for all the dsi phy versions (Stephen Boyd)
>    - Remove soc from examples (Stephen Boyd)
>    - Add description for register property
> 
> Changes in v4:
>    - Modify the title for all the phy versions (Stephen Boyd)
>    - Drop description for all the phy versions (Stephen Boyd)
>    - Modify the description for register property (Stephen Boyd)
> 
> Changes in v5:
>    - Remove unused properties from common dsi phy file
>    - Add clock-cells and phy-cells to required property
>      list (Stephen Boyd)
> ---
>  .../bindings/display/msm/dsi-phy-10nm.yaml         | 68 +++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-14nm.yaml         | 66 ++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-20nm.yaml         | 71 ++++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-28nm.yaml         | 68 +++++++++++++++++++++
>  .../bindings/display/msm/dsi-phy-common.yaml       | 40 ++++++++++++
>  5 files changed, 313 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.example.dt.yaml:0:0: /example-0/dsi-phy@fd922a00: failed to match any schema with compatible: ['qcom,dsi-phy-28nm']

See https://patchwork.ozlabs.org/patch/1462327

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
new file mode 100644
index 0000000..4a26bef
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-10nm.yaml
@@ -0,0 +1,68 @@ 
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-10nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 10nm PHY
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,dsi-phy-10nm
+      - const: qcom,dsi-phy-10nm-8998
+
+  reg:
+    items:
+      - description: dsi phy register set
+      - description: dsi phy lane register set
+      - description: dsi pll register set
+
+  reg-names:
+    items:
+      - const: dsi_phy
+      - const: dsi_phy_lane
+      - const: dsi_pll
+
+  vdds-supply:
+    description: |
+      Connected to DSI0_MIPI_DSI_PLL_VDDA0P9 pin for sc7180 target and
+      connected to VDDA_MIPI_DSI_0_PLL_0P9 pin for sdm845 target
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vdds-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@ae94400 {
+         compatible = "qcom,dsi-phy-10nm";
+         reg = <0x0ae94400 0x200>,
+               <0x0ae94600 0x280>,
+               <0x0ae94a00 0x1e0>;
+         reg-names = "dsi_phy",
+                     "dsi_phy_lane",
+                     "dsi_pll";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vdds-supply = <&vdda_mipi_dsi0_pll>;
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
new file mode 100644
index 0000000..72a00cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-14nm.yaml
@@ -0,0 +1,66 @@ 
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-14nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 14nm PHY
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,dsi-phy-14nm
+      - const: qcom,dsi-phy-14nm-660
+
+  reg:
+    items:
+      - description: dsi phy register set
+      - description: dsi phy lane register set
+      - description: dsi pll register set
+
+  reg-names:
+    items:
+      - const: dsi_phy
+      - const: dsi_phy_lane
+      - const: dsi_pll
+
+  vcca-supply:
+    description: Phandle to vcca regulator device node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vcca-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@ae94400 {
+         compatible = "qcom,dsi-phy-14nm";
+         reg = <0x0ae94400 0x200>,
+               <0x0ae94600 0x280>,
+               <0x0ae94a00 0x1e0>;
+         reg-names = "dsi_phy",
+                     "dsi_phy_lane",
+                     "dsi_pll";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vcca-supply = <&vcca_reg>;
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
new file mode 100644
index 0000000..743806d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-20nm.yaml
@@ -0,0 +1,71 @@ 
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-20nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 20nm PHY
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,dsi-phy-20nm
+
+  reg:
+    items:
+      - description: dsi pll register set
+      - description: dsi phy register set
+      - description: dsi phy regulator register set
+
+  reg-names:
+    items:
+      - const: dsi_pll
+      - const: dsi_phy
+      - const: dsi_phy_regulator
+
+  vcca-supply:
+    description: Phandle to vcca regulator device node.
+
+  vddio-supply:
+    description: Phandle to vdd-io regulator device node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vddio-supply
+  - vcca-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@fd922a00 {
+         compatible = "qcom,dsi-phy-20nm";
+         reg = <0xfd922a00 0xd4>,
+               <0xfd922b00 0x2b0>,
+               <0xfd922d80 0x7b>;
+         reg-names = "dsi_pll",
+                     "dsi_phy",
+                     "dsi_phy_regulator";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vcca-supply = <&vcca_reg>;
+         vddio-supply = <&vddio_reg>;
+
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
new file mode 100644
index 0000000..78f6b16
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-28nm.yaml
@@ -0,0 +1,68 @@ 
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-28nm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Display DSI 28nm PHY
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+allOf:
+  - $ref: dsi-phy-common.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: qcom,dsi-phy-28nm-hpm
+      - const: qcom,dsi-phy-28nm-lp
+      - const: qcom,dsi-phy-28nm-8960
+
+  reg:
+    items:
+      - description: dsi pll register set
+      - description: dsi phy register set
+      - description: dsi phy regulator register set
+
+  reg-names:
+    items:
+      - const: dsi_pll
+      - const: dsi_phy
+      - const: dsi_phy_regulator
+
+  vddio-supply:
+    description: Phandle to vdd-io regulator device node.
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - vddio-supply
+
+unevaluatedProperties: false
+
+examples:
+  - |
+     #include <dt-bindings/clock/qcom,dispcc-sdm845.h>
+     #include <dt-bindings/clock/qcom,rpmh.h>
+
+     dsi-phy@fd922a00 {
+         compatible = "qcom,dsi-phy-28nm";
+         reg = <0xfd922a00 0xd4>,
+               <0xfd922b00 0x2b0>,
+               <0xfd922d80 0x7b>;
+         reg-names = "dsi_pll",
+                     "dsi_phy",
+                     "dsi_phy_regulator";
+
+         #clock-cells = <1>;
+         #phy-cells = <0>;
+
+         vddio-supply = <&vddio_reg>;
+
+         clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+                  <&rpmhcc RPMH_CXO_CLK>;
+         clock-names = "iface", "ref";
+     };
+...
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
new file mode 100644
index 0000000..502bdda
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-common.yaml
@@ -0,0 +1,40 @@ 
+# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/msm/dsi-phy-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Description of Qualcomm Display DSI PHY common dt properties
+
+maintainers:
+  - Krishna Manikandan <mkrishn@codeaurora.org>
+
+description: |
+  This defines the DSI PHY dt properties which are common for all
+  dsi phy versions.
+
+properties:
+  "#clock-cells":
+    const: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: Display AHB clock
+      - description: Board XO source
+
+  clock-names:
+    items:
+      - const: iface
+      - const: ref
+
+required:
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#phy-cells"
+
+additionalProperties: true
+...