Message ID | 1618398783-7834-3-git-send-email-skakit@codeaurora.org (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | Add PMIC DT files for sc7280 | expand |
On Wed, Apr 14, 2021 at 04:43:00PM +0530, satya priya wrote: > Subject: arm64: dts: qcom: pmk8350: Add PMIC peripherals for pmk8350 nit: why 'PMIC peripherals', are these peripherals somehow specific to PMICs? > Add PON, RTC and other PMIC infra modules support for PMK8350. nit: it seems somewhat arbitrary to specifically mention PON and RTC, and then treat the ADC and the thermal monitor as 'others'. You could just spell them out too. > > Signed-off-by: satya priya <skakit@codeaurora.org> > --- > arch/arm64/boot/dts/qcom/pmk8350.dtsi | 55 ++++++++++++++++++++++++++++++++++- > 1 file changed, 54 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi > index 1530b8f..bbd9fa7 100644 > --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi > +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi > @@ -3,6 +3,12 @@ > * Copyright (c) 2021, Linaro Limited > */ > > +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> > +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> > +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> > +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h> the includes of the constants for the other PMICs seems to be an remainder from older vesions, which included nodes for the on die temperatures of these PMICs.
On 2021-04-20 22:59, Matthias Kaehlcke wrote: > On Wed, Apr 14, 2021 at 04:43:00PM +0530, satya priya wrote: > >> Subject: arm64: dts: qcom: pmk8350: Add PMIC peripherals for pmk8350 > > nit: why 'PMIC peripherals', are these peripherals somehow specific > to PMICs? > Okay will change it. >> Add PON, RTC and other PMIC infra modules support for PMK8350. > > nit: it seems somewhat arbitrary to specifically mention PON and RTC, > and then treat the ADC and the thermal monitor as 'others'. You could > just spell them out too. > Okay. >> >> Signed-off-by: satya priya <skakit@codeaurora.org> >> --- >> arch/arm64/boot/dts/qcom/pmk8350.dtsi | 55 >> ++++++++++++++++++++++++++++++++++- >> 1 file changed, 54 insertions(+), 1 deletion(-) >> >> diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi >> b/arch/arm64/boot/dts/qcom/pmk8350.dtsi >> index 1530b8f..bbd9fa7 100644 >> --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi >> +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi >> @@ -3,6 +3,12 @@ >> * Copyright (c) 2021, Linaro Limited >> */ >> >> +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> >> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> >> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> >> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h> > > the includes of the constants for the other PMICs seems to be an > remainder from older vesions, which included nodes for the on die > temperatures of these PMICs. As I have added on die temp nodes for these pmics in sc7280-idp file, will add these header files also there. Thanks, Satya Priya
diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi index 1530b8f..bbd9fa7 100644 --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi @@ -3,6 +3,12 @@ * Copyright (c) 2021, Linaro Limited */ +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h> +#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/spmi/spmi.h> @@ -13,10 +19,57 @@ #address-cells = <1>; #size-cells = <0>; + pmk8350_pon: pon@1300 { + compatible = "qcom,pm8998-pon"; + reg = <0x1300>; + + pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_POWER>; + }; + + resin { + compatible = "qcom,pmk8350-resin"; + interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; + + pmk8350_vadc: adc@3100 { + compatible = "qcom,spmi-adc7"; + reg = <0x3100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "eoc-int-en-set"; + #io-channel-cells = <1>; + io-channel-ranges; + }; + + pmk8350_adc_tm: adc-tm@3400 { + compatible = "qcom,adc-tm7"; + reg = <0x3400>; + interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "threshold"; + #address-cells = <1>; + #size-cells = <0>; + #thermal-sensor-cells = <1>; + status = "disabled"; + }; + + pmk8350_rtc: rtc@6100 { + compatible = "qcom,pmk8350-rtc"; + reg = <0x6100>, <0x6200>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>; + }; + pmk8350_gpios: gpio@b000 { - compatible = "qcom,pmk8350-gpio"; + compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio"; reg = <0xb000>; gpio-controller; + gpio-ranges = <&pmk8350_gpios 0 0 4>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>;
Add PON, RTC and other PMIC infra modules support for PMK8350. Signed-off-by: satya priya <skakit@codeaurora.org> --- arch/arm64/boot/dts/qcom/pmk8350.dtsi | 55 ++++++++++++++++++++++++++++++++++- 1 file changed, 54 insertions(+), 1 deletion(-)