| Message ID | 1618574638-5117-2-git-send-email-sibis@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Use qmp_send to update co-processor load state | expand |
Quoting Sibi Sankar (2021-04-16 05:03:47) > Drop power-domain bindings exposed by AOSS QMP node. > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org> > --- Reviewed-by: Stephen Boyd <swboyd@chromium.org>
On Fri, Apr 16, 2021 at 05:33:47PM +0530, Sibi Sankar wrote: > Drop power-domain bindings exposed by AOSS QMP node. That's obvious from the diff. The commit msg should tell us why. > > Signed-off-by: Sibi Sankar <sibis@codeaurora.org> > --- > .../devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt | 16 ++-------------- > 1 file changed, 2 insertions(+), 14 deletions(-) > > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt > index 783dc81b0f26..c0ae051a5b76 100644 > --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt > @@ -9,8 +9,7 @@ Messaging Protocol (QMP) > > The AOSS side channel exposes control over a set of resources, used to control > a set of debug related clocks and to affect the low power state of resources > -related to the secondary subsystems. These resources are exposed as a set of > -power-domains. > +related to the secondary subsystems. > > - compatible: > Usage: required > @@ -46,14 +45,6 @@ power-domains. > Definition: must be 0 > The single clock represents the QDSS clock. > > -- #power-domain-cells: > - Usage: optional > - Value type: <u32> > - Definition: must be 1 > - The provided power-domains are: > - CDSP state (0), LPASS state (1), modem state (2), SLPI > - state (3), SPSS state (4) and Venus state (5). > - > = SUBNODES > The AOSS side channel also provides the controls for three cooling devices, > these are expressed as subnodes of the QMP node. The name of the node is used > @@ -66,8 +57,7 @@ to identify the resource and must therefor be "cx", "mx" or "ebi". > > = EXAMPLE > > -The following example represents the AOSS side-channel message RAM and the > -mechanism exposing the power-domains, as found in SDM845. > +The following example represents the AOSS side-channel message RAM as found in SDM845. > > aoss_qmp: qmp@c300000 { > compatible = "qcom,sdm845-aoss-qmp"; > @@ -75,8 +65,6 @@ mechanism exposing the power-domains, as found in SDM845. > interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; > mboxes = <&apss_shared 0>; > > - #power-domain-cells = <1>; > - > cx_cdev: cx { > #cooling-cells = <2>; > }; > -- > The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, > a Linux Foundation Collaborative Project >
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt index 783dc81b0f26..c0ae051a5b76 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt @@ -9,8 +9,7 @@ Messaging Protocol (QMP) The AOSS side channel exposes control over a set of resources, used to control a set of debug related clocks and to affect the low power state of resources -related to the secondary subsystems. These resources are exposed as a set of -power-domains. +related to the secondary subsystems. - compatible: Usage: required @@ -46,14 +45,6 @@ power-domains. Definition: must be 0 The single clock represents the QDSS clock. -- #power-domain-cells: - Usage: optional - Value type: <u32> - Definition: must be 1 - The provided power-domains are: - CDSP state (0), LPASS state (1), modem state (2), SLPI - state (3), SPSS state (4) and Venus state (5). - = SUBNODES The AOSS side channel also provides the controls for three cooling devices, these are expressed as subnodes of the QMP node. The name of the node is used @@ -66,8 +57,7 @@ to identify the resource and must therefor be "cx", "mx" or "ebi". = EXAMPLE -The following example represents the AOSS side-channel message RAM and the -mechanism exposing the power-domains, as found in SDM845. +The following example represents the AOSS side-channel message RAM as found in SDM845. aoss_qmp: qmp@c300000 { compatible = "qcom,sdm845-aoss-qmp"; @@ -75,8 +65,6 @@ mechanism exposing the power-domains, as found in SDM845. interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>; mboxes = <&apss_shared 0>; - #power-domain-cells = <1>; - cx_cdev: cx { #cooling-cells = <2>; };
Drop power-domain bindings exposed by AOSS QMP node. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> --- .../devicetree/bindings/soc/qcom/qcom,aoss-qmp.txt | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-)