diff mbox series

[V4,6/8] arm64: dts: qcom: pmk8350: Add peripherals for pmk8350

Message ID 1620197726-23802-7-git-send-email-skakit@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Add PMIC DT files for sc7280 | expand

Commit Message

Satya Priya May 5, 2021, 6:55 a.m. UTC 
Add PON, RTC, VADC and ACD_TM support for PMK8350.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pmk8350.dtsi | 51 ++++++++++++++++++++++++++++++++++-
 1 file changed, 50 insertions(+), 1 deletion(-)

Comments

Matthias Kaehlcke May 5, 2021, 2:35 p.m. UTC | #1 
On Wed, May 05, 2021 at 12:25:24PM +0530, satya priya wrote:
> Add PON, RTC, VADC and ACD_TM support for PMK8350.
> 
> Signed-off-by: satya priya <skakit@codeaurora.org>

Please make sure to include per patch change logs for v > 1. It's
generally useful for following the evolution of a patch and can
save reviewers time by focussing their attention on the parts that
have changed with respect to the previous version, rather than
having to review the entire patch with possibly only minor (or no)
changes over and over again (though multiple passes are often
useful).

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index 1530b8f..04fc263 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -3,6 +3,8 @@ 
  * Copyright (c) 2021, Linaro Limited
  */
 
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
 
@@ -13,10 +15,57 @@ 
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pmk8350_pon: pon@1300 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x1300>;
+
+			pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+			};
+
+			resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_VOLUMEDOWN>;
+			};
+		};
+
+		pmk8350_vadc: adc@3100 {
+			compatible = "qcom,spmi-adc7";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eoc-int-en-set";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+		};
+
+		pmk8350_adc_tm: adc-tm@3400 {
+			compatible = "qcom,adc-tm7";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "threshold";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8350_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+
 		pmk8350_gpios: gpio@b000 {
-			compatible = "qcom,pmk8350-gpio";
+			compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
 			reg = <0xb000>;
 			gpio-controller;
+			gpio-ranges = <&pmk8350_gpios 0 0 4>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;