diff mbox series

[v2] phy: qcom-qmp: remove redundant error of clock bulk

Message ID 1621229841-22984-1-git-send-email-chunfeng.yun@mediatek.com (mailing list archive)
State New
Headers show
Series [v2] phy: qcom-qmp: remove redundant error of clock bulk | expand

Commit Message

Chunfeng Yun May 17, 2021, 5:37 a.m. UTC
There is error log in clk_bulk_prepare/enable()

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v2: add reviewed-by Bjorn
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

Comments

Vinod Koul May 31, 2021, 8:20 a.m. UTC | #1
On 17-05-21, 13:37, Chunfeng Yun wrote:
> There is error log in clk_bulk_prepare/enable()
> 

Applied, thanks
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 7877f70cf86f..882b8ecae235 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3993,10 +3993,8 @@  static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
 	}
 
 	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+	if (ret)
 		goto err_rst;
-	}
 
 	if (cfg->has_phy_dp_com_ctrl) {
 		qphy_setbits(dp_com, QPHY_V3_DP_COM_POWER_DOWN_CTRL,
@@ -4430,10 +4428,8 @@  static int __maybe_unused qcom_qmp_phy_runtime_resume(struct device *dev)
 	}
 
 	ret = clk_bulk_prepare_enable(cfg->num_clks, qmp->clks);
-	if (ret) {
-		dev_err(qmp->dev, "failed to enable clks, err=%d\n", ret);
+	if (ret)
 		return ret;
-	}
 
 	ret = clk_prepare_enable(qphy->pipe_clk);
 	if (ret) {