diff mbox series

[V5,08/11] arm64: dts: qcom: pmk8350: Correct the GPIO node

Message ID 1621937466-1502-9-git-send-email-skakit@codeaurora.org (mailing list archive)
State Accepted
Headers show
Series Add PMIC DT files for sc7280 | expand

Commit Message

Satya Priya May 25, 2021, 10:11 a.m. UTC 
Add gpio ranges and correct the compatible to add
"qcom,spmi-gpio" as this pmic is on spmi bus.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
Changes in V5:
 - This is split from patch [7/11] and added newly in V5.

 arch/arm64/boot/dts/qcom/pmk8350.dtsi | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Matthias Kaehlcke May 25, 2021, 9 p.m. UTC | #1 
On Tue, May 25, 2021 at 03:41:03PM +0530, satya priya wrote:
> Add gpio ranges and correct the compatible to add
> "qcom,spmi-gpio" as this pmic is on spmi bus.
> 
> Signed-off-by: satya priya <skakit@codeaurora.org>
> ---
> Changes in V5:
>  - This is split from patch [7/11] and added newly in V5.

this should say 'patch [6/8]' I think.

https://patchwork.kernel.org/project/linux-arm-msm/patch/1621318822-29332-7-git-send-email-skakit@codeaurora.org/

>  arch/arm64/boot/dts/qcom/pmk8350.dtsi | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
> index ecd5ccd..04fc263 100644
> --- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
> @@ -62,9 +62,10 @@
>  		};
>  
>  		pmk8350_gpios: gpio@b000 {
> -			compatible = "qcom,pmk8350-gpio";
> +			compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
>  			reg = <0xb000>;
>  			gpio-controller;
> +			gpio-ranges = <&pmk8350_gpios 0 0 4>;
>  			#gpio-cells = <2>;
>  			interrupt-controller;
>  			#interrupt-cells = <2>;

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
index ecd5ccd..04fc263 100644
--- a/arch/arm64/boot/dts/qcom/pmk8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -62,9 +62,10 @@ 
 		};
 
 		pmk8350_gpios: gpio@b000 {
-			compatible = "qcom,pmk8350-gpio";
+			compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
 			reg = <0xb000>;
 			gpio-controller;
+			gpio-ranges = <&pmk8350_gpios 0 0 4>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;