diff mbox series

[v4] drm/msm/dp: power off DP phy at suspend

Message ID 1622652185-7157-1-git-send-email-khsieh@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series [v4] drm/msm/dp: power off DP phy at suspend | expand

Commit Message

Kuogee Hsieh June 2, 2021, 4:43 p.m. UTC
Normal DP suspend operation contains two steps, display off followed
by dp suspend, to complete system wide suspending cycle if display is
up at that time. In this case, DP phy will be powered off at display
off. However there is an exception case that depending on the timing
of dongle plug in during system wide suspending, sometimes display off
procedure may be skipped and dp suspend was called directly. In this
case, dp phy is stay at powered on (phy->power_count = 1) so that at
next resume dp driver crash at main link clock enable due to phy is
not physically powered on. This patch will call dp_ctrl_off_link_stream()
to tear down main link and power off phy at dp_pm_suspend() if main link
had been brought up.

Changes in V2:
-- stashed changes into dp_ctrl.c
-- add is_phy_on to monitor phy state

Changes in V3:
-- delete is_phy_on
-- call dp_ctrl_off_link_stream() from dp_pm_suspend()

Changes in V4:
-- delete changes made at dp_power.c
-- move main link status checking to dp_pm_suspend

Fixes: 0114f31a2903 ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly)
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c    | 10 ++++++----
 drivers/gpu/drm/msm/dp/dp_display.c |  7 ++++++-
 2 files changed, 12 insertions(+), 5 deletions(-)

Comments

Stephen Boyd June 3, 2021, 12:23 a.m. UTC | #1
Quoting Kuogee Hsieh (2021-06-02 09:43:05)
> Normal DP suspend operation contains two steps, display off followed
> by dp suspend, to complete system wide suspending cycle if display is
> up at that time. In this case, DP phy will be powered off at display
> off. However there is an exception case that depending on the timing
> of dongle plug in during system wide suspending, sometimes display off
> procedure may be skipped and dp suspend was called directly. In this
> case, dp phy is stay at powered on (phy->power_count = 1) so that at
> next resume dp driver crash at main link clock enable due to phy is
> not physically powered on. This patch will call dp_ctrl_off_link_stream()
> to tear down main link and power off phy at dp_pm_suspend() if main link
> had been brought up.
>
> Changes in V2:
> -- stashed changes into dp_ctrl.c
> -- add is_phy_on to monitor phy state
>
> Changes in V3:
> -- delete is_phy_on
> -- call dp_ctrl_off_link_stream() from dp_pm_suspend()
>
> Changes in V4:
> -- delete changes made at dp_power.c
> -- move main link status checking to dp_pm_suspend
>
> Fixes: 0114f31a2903 ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly)
> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> ---

Ok, this seems to work and is nice and small

Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Stephen Boyd June 3, 2021, 6:03 a.m. UTC | #2
Quoting Kuogee Hsieh (2021-06-02 09:43:05)
> Normal DP suspend operation contains two steps, display off followed
> by dp suspend, to complete system wide suspending cycle if display is
> up at that time. In this case, DP phy will be powered off at display
> off. However there is an exception case that depending on the timing
> of dongle plug in during system wide suspending, sometimes display off
> procedure may be skipped and dp suspend was called directly. In this
> case, dp phy is stay at powered on (phy->power_count = 1) so that at
> next resume dp driver crash at main link clock enable due to phy is
> not physically powered on. This patch will call dp_ctrl_off_link_stream()
> to tear down main link and power off phy at dp_pm_suspend() if main link
> had been brought up.
>
> Changes in V2:
> -- stashed changes into dp_ctrl.c
> -- add is_phy_on to monitor phy state
>
> Changes in V3:
> -- delete is_phy_on
> -- call dp_ctrl_off_link_stream() from dp_pm_suspend()
>
> Changes in V4:
> -- delete changes made at dp_power.c
> -- move main link status checking to dp_pm_suspend
>
> Fixes: 0114f31a2903 ("drm/msm/dp: handle irq_hpd with sink_count = 0 correctly)

This should be 8dbde399044b
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index dbd8943..caf71fa 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -1827,10 +1827,12 @@  int dp_ctrl_off_link_stream(struct dp_ctrl *dp_ctrl)
 
 	dp_catalog_ctrl_mainlink_ctrl(ctrl->catalog, false);
 
-	ret = dp_power_clk_enable(ctrl->power, DP_STREAM_PM, false);
-	if (ret) {
-		DRM_ERROR("Failed to disable pixel clocks. ret=%d\n", ret);
-		return ret;
+	if (dp_power_clk_status(ctrl->power, DP_STREAM_PM)) {
+		ret = dp_power_clk_enable(ctrl->power, DP_STREAM_PM, false);
+		if (ret) {
+			DRM_ERROR("Failed to disable pclk. ret=%d\n", ret);
+			return ret;
+		}
 	}
 
 	ret = dp_power_clk_enable(ctrl->power, DP_CTRL_PM, false);
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index cdec0a3..9c59def 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1327,8 +1327,13 @@  static int dp_pm_suspend(struct device *dev)
 
 	mutex_lock(&dp->event_mutex);
 
-	if (dp->core_initialized == true)
+	if (dp->core_initialized == true) {
+		/* mainlink enabled */
+		if (dp_power_clk_status(dp->power, DP_CTRL_PM))
+			dp_ctrl_off_link_stream(dp->ctrl);
+
 		dp_display_host_deinit(dp);
+	}
 
 	dp->hpd_state = ST_SUSPENDED;