| Message ID | 1630641758-22281-1-git-send-email-zijuhu@codeaurora.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v8] Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller | expand |
Hi Zijun, > the RF perfermance of wcn6855 soc chip from different foundries will be > difference, so we should use different nvm to configure them. > > Signed-off-by: Tim Jiang <tjiang@codeaurora.org> > --- > drivers/bluetooth/btusb.c | 50 +++++++++++++++++++++++++++++++++++------------ > 1 file changed, 37 insertions(+), 13 deletions(-) > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index 928cbfa4c42d..0f5d2222d624 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -3161,6 +3161,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev, > #define QCA_DFU_TIMEOUT 3000 > #define QCA_FLAG_MULTI_NVM 0x80 > > +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200 > +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211 > + > struct qca_version { > __le32 rom_version; > __le32 patch_version; > @@ -3192,6 +3195,7 @@ static const struct qca_device_info qca_devices_table[] = { > { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */ > { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */ > { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */ > + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */ > }; > > static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, > @@ -3346,6 +3350,31 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev, > return err; > } > > +static void btusb_generate_qca_nvm_name(char *fwname, > + size_t max_size, > + struct qca_version *ver, > + char *variant) > +{ > + char *sep = (strlen(variant) == 0) ? "" : "_"; > + u16 board_id = le16_to_cpu(ver->board_id); > + u32 rom_version = le32_to_cpu(ver->rom_version); > + > + if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { > + /* if boardid equal 0, use default nvm without suffix */ > + if (board_id == 0x0) { > + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s%s.bin", > + rom_version, sep, variant); > + } else { > + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s%s_%04x.bin", > + rom_version, sep, variant, board_id); > + } > + } else { > + snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin", > + rom_version); > + } > + > +} > + > static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, > struct qca_version *ver, > const struct qca_device_info *info) > @@ -3354,19 +3383,14 @@ static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, > char fwname[64]; > int err; > > - if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { > - /* if boardid equal 0, use default nvm without surfix */ > - if (le16_to_cpu(ver->board_id) == 0x0) { > - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin", > - le32_to_cpu(ver->rom_version)); > - } else { > - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin", > - le32_to_cpu(ver->rom_version), > - le16_to_cpu(ver->board_id)); > - } > - } else { > - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin", > - le32_to_cpu(ver->rom_version)); > + switch (ver->ram_version) { > + case WCN6855_2_0_RAM_VERSION_GF: > + case WCN6855_2_1_RAM_VERSION_GF: > + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver, "gf"); > + break; > + default: > + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver, ""); > + break; I mentioned this multiple times now, the indentation is wrong here. Regards Marcel
On Fri, Sep 03, 2021 at 12:02:38PM +0800, Zijun Hu wrote: > From: Tim Jiang <tjiang@codeaurora.org> > > the RF perfermance of wcn6855 soc chip from different foundries will be as Marcel commented on a previous version: 'perfermence' => 'performance' > difference, so we should use different nvm to configure them. > > Signed-off-by: Tim Jiang <tjiang@codeaurora.org> For the third time, you should also add your own 'Signed-off-by' tag, i.e. 'Signed-off-by: Zijun Hu <zijuhu@codeaurora.org>' If you have any doubts about comments you receive ask for clarification, just ignoring them generally won't satisfy your reviewers. > --- > drivers/bluetooth/btusb.c | 50 +++++++++++++++++++++++++++++++++++------------ > 1 file changed, 37 insertions(+), 13 deletions(-) > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index 928cbfa4c42d..0f5d2222d624 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -3161,6 +3161,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev, > #define QCA_DFU_TIMEOUT 3000 > #define QCA_FLAG_MULTI_NVM 0x80 > > +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200 > +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211 > + > struct qca_version { > __le32 rom_version; > __le32 patch_version; > @@ -3192,6 +3195,7 @@ static const struct qca_device_info qca_devices_table[] = { > { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */ > { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */ > { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */ > + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */ > }; > > static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, > @@ -3346,6 +3350,31 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev, > return err; > } > > +static void btusb_generate_qca_nvm_name(char *fwname, > + size_t max_size, > + struct qca_version *ver, > + char *variant) The variant parameter should probably be removed (see coment below), if it is kept it should be 'const char *'. > +{ > + char *sep = (strlen(variant) == 0) ? "" : "_"; > + u16 board_id = le16_to_cpu(ver->board_id); > + u32 rom_version = le32_to_cpu(ver->rom_version); > + > + if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { > + /* if boardid equal 0, use default nvm without suffix */ This comment isn't useful, please remove it. Ok, it was already in btusb_setup_qca_load_nvm(), but still it's a good opportunity to remove it. > + if (board_id == 0x0) { Just use '0' instead of the single digit hex number. > + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s%s.bin", > + rom_version, sep, variant); > + } else { > + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s%s_%04x.bin", > + rom_version, sep, variant, board_id); > + } > + } else { > + snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin", > + rom_version); > + } > + delete empty line > +} > + > static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, > struct qca_version *ver, > const struct qca_device_info *info) > @@ -3354,19 +3383,14 @@ static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, > char fwname[64]; > int err; > > - if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { > - /* if boardid equal 0, use default nvm without surfix */ > - if (le16_to_cpu(ver->board_id) == 0x0) { > - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin", > - le32_to_cpu(ver->rom_version)); > - } else { > - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin", > - le32_to_cpu(ver->rom_version), > - le16_to_cpu(ver->board_id)); > - } > - } else { > - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin", > - le32_to_cpu(ver->rom_version)); > + switch (ver->ram_version) { > + case WCN6855_2_0_RAM_VERSION_GF: > + case WCN6855_2_1_RAM_VERSION_GF: > + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver, "gf"); > + break; > + default: > + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver, ""); > + break; Actually it would make more sense to have the above switch statement in btusb_generate_qca_nvm_name(), rather than passing the variant string.
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 928cbfa4c42d..0f5d2222d624 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -3161,6 +3161,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev, #define QCA_DFU_TIMEOUT 3000 #define QCA_FLAG_MULTI_NVM 0x80 +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200 +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211 + struct qca_version { __le32 rom_version; __le32 patch_version; @@ -3192,6 +3195,7 @@ static const struct qca_device_info qca_devices_table[] = { { 0x00000302, 28, 4, 16 }, /* Rome 3.2 */ { 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */ { 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */ + { 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */ }; static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, @@ -3346,6 +3350,31 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev, return err; } +static void btusb_generate_qca_nvm_name(char *fwname, + size_t max_size, + struct qca_version *ver, + char *variant) +{ + char *sep = (strlen(variant) == 0) ? "" : "_"; + u16 board_id = le16_to_cpu(ver->board_id); + u32 rom_version = le32_to_cpu(ver->rom_version); + + if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { + /* if boardid equal 0, use default nvm without suffix */ + if (board_id == 0x0) { + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s%s.bin", + rom_version, sep, variant); + } else { + snprintf(fwname, max_size, "qca/nvm_usb_%08x%s%s_%04x.bin", + rom_version, sep, variant, board_id); + } + } else { + snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin", + rom_version); + } + +} + static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, struct qca_version *ver, const struct qca_device_info *info) @@ -3354,19 +3383,14 @@ static int btusb_setup_qca_load_nvm(struct hci_dev *hdev, char fwname[64]; int err; - if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) { - /* if boardid equal 0, use default nvm without surfix */ - if (le16_to_cpu(ver->board_id) == 0x0) { - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin", - le32_to_cpu(ver->rom_version)); - } else { - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin", - le32_to_cpu(ver->rom_version), - le16_to_cpu(ver->board_id)); - } - } else { - snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin", - le32_to_cpu(ver->rom_version)); + switch (ver->ram_version) { + case WCN6855_2_0_RAM_VERSION_GF: + case WCN6855_2_1_RAM_VERSION_GF: + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver, "gf"); + break; + default: + btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver, ""); + break; } err = request_firmware(&fw, fwname, &hdev->dev);