diff mbox series

[v6,3/4] arm64: dts: qcom: sc7280: Add PCIe nodes for IDP board

Message ID 1631209245-31256-4-git-send-email-pmaliset@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Add DT bindings and DT nodes for PCIe and PHY in SC7280 | expand

Commit Message

Prasad Malisetty Sept. 9, 2021, 5:40 p.m. UTC 
Add PCIe and PHY nodes for sc7280 IDP board.

Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts | 39 +++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 64fc22a..b249ca1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -61,6 +61,45 @@ 
 	modem-init;
 };
 
+&pcie1 {
+	status = "okay";
+
+	vdda-supply = <&vreg_l10c_0p8>;
+};
+
+&pcie1_phy {
+	status = "okay";
+
+	vdda-phy-supply = <&vreg_l10c_0p8>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+};
+
+&pcie1_default_state {
+	clkreq {
+		bias-pull-up;
+	};
+
+	reset-n {
+		pins = "gpio2";
+		function = "gpio";
+
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	wake-n {
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	nvme-n {
+		pins = "gpio19";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
 &pmk8350_vadc {
 	pmr735a_die_temp {
 		reg = <PMR735A_ADC7_DIE_TEMP>;