diff mbox series

[v7,07/13] arm64: dts: qcom: sdm845: Use QMP property to control load state

Message ID 1631800770-371-8-git-send-email-sibis@codeaurora.org (mailing list archive)
State Accepted
Headers show
Series Use qmp_send to update co-processor load state | expand

Commit Message

Sibi Sankar Sept. 16, 2021, 1:59 p.m. UTC
Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SDM845 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---

v7:
 * Let's not miss adding qcom,qmp to ADSP/CDSP on SDM845 SoC.

 arch/arm64/boot/dts/qcom/sdm845.dtsi | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

Comments

Bjorn Andersson Sept. 27, 2021, 8:53 p.m. UTC | #1
On Thu, 16 Sep 2021 19:29:24 +0530, Sibi Sankar wrote:
> Use the Qualcomm Mailbox Protocol (QMP) property to control the load
> state resources on SDM845 SoCs and drop deprecated power-domains exposed
> by AOSS QMP node.
> 
> 

Applied, thanks!

[07/13] arm64: dts: qcom: sdm845: Use QMP property to control load state
        commit: db8e45a81bdc5246f55c4000033bbdc886cde70f

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index d18f7b419d2e..39c136e25fb5 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -763,6 +763,8 @@ 
 
 		memory-region = <&adsp_mem>;
 
+		qcom,qmp = <&aoss_qmp>;
+
 		qcom,smem-states = <&adsp_smp2p_out 0>;
 		qcom,smem-state-names = "stop";
 
@@ -862,6 +864,8 @@ 
 
 		memory-region = <&cdsp_mem>;
 
+		qcom,qmp = <&aoss_qmp>;
+
 		qcom,smem-states = <&cdsp_smp2p_out 0>;
 		qcom,smem-state-names = "stop";
 
@@ -2979,6 +2983,8 @@ 
 			clock-names = "iface", "bus", "mem", "gpll0_mss",
 				      "snoc_axi", "mnoc_axi", "prng", "xo";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2988,11 +2994,10 @@ 
 
 			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
 
-			power-domains = <&aoss_qmp 2>,
-					<&rpmhpd SDM845_CX>,
+			power-domains = <&rpmhpd SDM845_CX>,
 					<&rpmhpd SDM845_MX>,
 					<&rpmhpd SDM845_MSS>;
-			power-domain-names = "load_state", "cx", "mx", "mss";
+			power-domain-names = "cx", "mx", "mss";
 
 			mba {
 				memory-region = <&mba_region>;
@@ -4607,7 +4612,6 @@ 
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 
 			cx_cdev: cx {
 				#cooling-cells = <2>;