diff mbox series

[v4,5/5] drm/msm/dp: Enable ASSR for supported DP sinks

Message ID 1635839325-401-6-git-send-email-quic_sbillaka@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series Add support for eDP controller on SC7280 | expand

Commit Message

Sankeerth Billakanti (QUIC) Nov. 2, 2021, 7:48 a.m. UTC 
The eDP sink on sc7280 supports ASSR and dp driver will
enable ASSR in the source hardware. The driver needs to
enable the ASSR field in the DPCD configuration register
to avoid screen corruption. This change will enable ASSR
if supported in the sink device.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/gpu/drm/msm/dp/dp_ctrl.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
index a40e798..c724cb0 100644
--- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
+++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
@@ -119,13 +119,13 @@  void dp_ctrl_push_idle(struct dp_ctrl *dp_ctrl)
 static void dp_ctrl_config_ctrl(struct dp_ctrl_private *ctrl)
 {
 	u32 config = 0, tbd;
-	u8 *dpcd = ctrl->panel->dpcd;
+	const u8 *dpcd = ctrl->panel->dpcd;
 
 	/* Default-> LSCLK DIV: 1/4 LCLK  */
 	config |= (2 << DP_CONFIGURATION_CTRL_LSCLK_DIV_SHIFT);
 
 	/* Scrambler reset enable */
-	if (dpcd[DP_EDP_CONFIGURATION_CAP] & DP_ALTERNATE_SCRAMBLER_RESET_CAP)
+	if (drm_dp_alternate_scrambler_reset_cap(dpcd))
 		config |= DP_CONFIGURATION_CTRL_ASSR;
 
 	tbd = dp_link_get_test_bits_depth(ctrl->link,
@@ -1231,6 +1231,7 @@  static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
 	const u8 *dpcd = ctrl->panel->dpcd;
 	u8 encoding = DP_SET_ANSI_8B10B;
 	u8 ssc;
+	u8 assr;
 	struct dp_link_info link_info = {0};
 
 	dp_ctrl_config_ctrl(ctrl);
@@ -1249,6 +1250,12 @@  static int dp_ctrl_link_train(struct dp_ctrl_private *ctrl,
 	drm_dp_dpcd_write(ctrl->aux, DP_MAIN_LINK_CHANNEL_CODING_SET,
 				&encoding, 1);
 
+	if (drm_dp_alternate_scrambler_reset_cap(dpcd)) {
+		assr = DP_ALTERNATE_SCRAMBLER_RESET_ENABLE;
+		drm_dp_dpcd_write(ctrl->aux, DP_EDP_CONFIGURATION_SET,
+				&assr, 1);
+	}
+
 	ret = dp_ctrl_link_train_1(ctrl, training_step);
 	if (ret) {
 		DRM_ERROR("link training #1 failed. ret=%d\n", ret);