diff mbox series

[v2] drm/msm/dp: always add fail-safe mode into connector mode list

Message ID 1643066274-25814-1-git-send-email-quic_khsieh@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series [v2] drm/msm/dp: always add fail-safe mode into connector mode list | expand

Commit Message

Kuogee Hsieh Jan. 24, 2022, 11:17 p.m. UTC
Some of DP link compliant test expects to return fail-safe mode
if prefer detailed timing mode can not be supported by mainlink's
lane and rate after link training. Therefore add fail-safe mode
into connector mode list as backup mode. This patch fixes test
case 4.2.2.1.

Changes in v2:
-- add Fixes text string

Fixes: 4b85d405cfe9 ( "drm/msm/dp: reduce link rate if failed at link training 1")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
---
 drivers/gpu/drm/msm/dp/dp_panel.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Kuogee Hsieh Feb. 14, 2022, 4:41 p.m. UTC | #1
Hi Stephen,

Are you have more comments?


On 1/24/2022 3:17 PM, Kuogee Hsieh wrote:
> Some of DP link compliant test expects to return fail-safe mode
> if prefer detailed timing mode can not be supported by mainlink's
> lane and rate after link training. Therefore add fail-safe mode
> into connector mode list as backup mode. This patch fixes test
> case 4.2.2.1.
>
> Changes in v2:
> -- add Fixes text string
>
> Fixes: 4b85d405cfe9 ( "drm/msm/dp: reduce link rate if failed at link training 1")
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---
>   drivers/gpu/drm/msm/dp/dp_panel.c | 5 +++++
>   1 file changed, 5 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
> index 71db10c..f141872 100644
> --- a/drivers/gpu/drm/msm/dp/dp_panel.c
> +++ b/drivers/gpu/drm/msm/dp/dp_panel.c
> @@ -212,6 +212,11 @@ int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
>   		if (drm_add_modes_noedid(connector, 640, 480))
>   			drm_set_preferred_mode(connector, 640, 480);
>   		mutex_unlock(&connector->dev->mode_config.mutex);
> +	} else {
> +		/* always add fail-safe mode as backup mode */
> +		mutex_lock(&connector->dev->mode_config.mutex);
> +		drm_add_modes_noedid(connector, 640, 480);
> +		mutex_unlock(&connector->dev->mode_config.mutex);
>   	}
>   
>   	if (panel->aux_cfg_update_done) {
Stephen Boyd Feb. 16, 2022, 7:32 p.m. UTC | #2
Quoting Kuogee Hsieh (2022-01-24 15:17:54)
> Some of DP link compliant test expects to return fail-safe mode
> if prefer detailed timing mode can not be supported by mainlink's
> lane and rate after link training. Therefore add fail-safe mode
> into connector mode list as backup mode. This patch fixes test
> case 4.2.2.1.
>
> Changes in v2:
> -- add Fixes text string
>
> Fixes: 4b85d405cfe9 ( "drm/msm/dp: reduce link rate if failed at link training 1")
> Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_panel.c b/drivers/gpu/drm/msm/dp/dp_panel.c
index 71db10c..f141872 100644
--- a/drivers/gpu/drm/msm/dp/dp_panel.c
+++ b/drivers/gpu/drm/msm/dp/dp_panel.c
@@ -212,6 +212,11 @@  int dp_panel_read_sink_caps(struct dp_panel *dp_panel,
 		if (drm_add_modes_noedid(connector, 640, 480))
 			drm_set_preferred_mode(connector, 640, 480);
 		mutex_unlock(&connector->dev->mode_config.mutex);
+	} else {
+		/* always add fail-safe mode as backup mode */
+		mutex_lock(&connector->dev->mode_config.mutex);
+		drm_add_modes_noedid(connector, 640, 480);
+		mutex_unlock(&connector->dev->mode_config.mutex);
 	}
 
 	if (panel->aux_cfg_update_done) {