diff mbox series

[v3,2/2] arm64: dts: qcom: sc7280: add lpass lpi pin controller node

Message ID 1644504710-944-3-git-send-email-quic_srivasam@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add lpass pin control support for audio on sc7280 based targets | expand

Commit Message

Srinivasa Rao Mandadapu Feb. 10, 2022, 2:51 p.m. UTC 
Add LPASS LPI pinctrl node required for Audio functionality on sc7280
based platforms.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 147 +++++++++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 503d461..dac2b47 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1751,6 +1751,153 @@ 
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		lpass_tlmm: pinctrl@33c0000 {
+			compatible = "qcom,sc7280-lpass-lpi-pinctrl";
+			reg = <0 0x33c0000 0x0 0x20000>,
+				<0 0x3550000 0x0 0x10000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&lpass_tlmm 0 0 15>;
+
+			#clock-cells = <1>;
+
+			dmic01_active: dmic01-active {
+				clk {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <8>;
+				};
+			};
+
+			dmic01_sleep: dmic01-sleep {
+				clk {
+					pins = "gpio6";
+					function = "dmic1_clk";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+
+				data {
+					pins = "gpio7";
+					function = "dmic1_data";
+					drive-strength = <2>;
+					pull-down;
+				};
+			};
+
+			dmic23_active: dmic02-active {
+				clk {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <8>;
+					output-high;
+				};
+
+				data {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <8>;
+				};
+			};
+
+			dmic23_sleep: dmic02-sleep {
+				clk {
+					pins = "gpio8";
+					function = "dmic2_clk";
+					drive-strength = <2>;
+					bias-disable;
+					output-low;
+				};
+
+				data {
+					pins = "gpio9";
+					function = "dmic2_data";
+					drive-strength = <2>;
+					pull-down;
+				};
+			};
+
+			rx_swr_active: rx-swr-active {
+				clk {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			rx_swr_sleep: rx-swr-sleep {
+				clk {
+					pins = "gpio3";
+					function = "swr_rx_clk";
+					drive-strength = <2>;
+					input-enable;
+					bias-pull-down;
+				};
+
+				data {
+					pins = "gpio4", "gpio5";
+					function = "swr_rx_data";
+					drive-strength = <2>;
+					input-enable;
+					bias-pull-down;
+				};
+			};
+
+			tx_swr_active: tx-swr-active {
+				clk {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-disable;
+				};
+
+				data {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					slew-rate = <1>;
+					bias-bus-hold;
+				};
+			};
+
+			tx_swr_sleep: tx-swr-sleep {
+				clk {
+					pins = "gpio0";
+					function = "swr_tx_clk";
+					drive-strength = <2>;
+					input-enable;
+					bias-pull-down;
+				};
+
+				data {
+					pins = "gpio1", "gpio2", "gpio14";
+					function = "swr_tx_data";
+					drive-strength = <2>;
+					input-enable;
+					bias-bus-hold;
+				};
+			};
+		};
+
 		gpu: gpu@3d00000 {
 			compatible = "qcom,adreno-635.0", "qcom,adreno";
 			reg = <0 0x03d00000 0 0x40000>,