[V6,5/6] arm64: dts: qcom: pm8008: Add base dts file

Commit Message

Satya Priya Kakitapalli (Temp) Feb. 15, 2022, 8:53 a.m. UTC

Add base DTS file for pm8008 with infra and regulator nodes.

Signed-off-by: Satya Priya <[e-mail]>
---
Changes in V4:
 - This is newly added in V4, to add all the pm8008 common stuff.

Changes in V5:
 - Changed the mfd node names from pm8008_chip to pm8008_infra and
   pm8008_ldo to pm8008_regulators as they re more appropriate.
 - Changed the compatible for pm8008@9 mfd node to differentiate from
   pm8008@8 node in driver.
 - Removed compatible for regulators node.
 - Removed reg property for LDOs and added in driver.

Changes in V6:
 - Changed node names to small letters.

 arch/arm64/boot/dts/qcom/pm8008.dtsi | 46 ++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8008.dtsi

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8008.dtsi b/arch/arm64/boot/dts/qcom/pm8008.dtsi
new file mode 100644
index 0000000..8193d11
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8008.dtsi
@@ -0,0 +1,46 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+
+pm8008_infra: pm8008@8 {
+	compatible = "qcom,pm8008";
+	reg = <0x8>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+};
+
+pm8008_regulators: pm8008@9 {
+	compatible = "qcom,pm8008-regulators";
+	reg = <0x9>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	regulators {
+		pm8008_l1: ldo1 {
+			regulator-name = "pm8008_l1";
+		};
+
+		pm8008_l2: ldo2 {
+			regulator-name = "pm8008_l2";
+		};
+
+		pm8008_l3: ldo3 {
+			regulator-name = "pm8008_l3";
+		};
+
+		pm8008_l4: ldo4 {
+			regulator-name = "pm8008_l4";
+		};
+
+		pm8008_l5: ldo5 {
+			regulator-name = "pm8008_l5";
+		};
+
+		pm8008_l6: ldo6 {
+			regulator-name = "pm8008_l6";
+		};
+
+		pm8008_l7: ldo7 {
+			regulator-name = "pm8008_l7";
+		};
+	};
+};